• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.2
• /
• pp.84-96
• /
• 1995

The dewatering characteristics of the sewage sludge was investigated through the experimental observations and model simulations. The activated sludge and the anaerobically digested sludge were examined for the dewaterability evaluation within the pressure range of $0{\sim}10^6N/m^2$. Modified Buchner funnel test and compression test by the consolidometer were conducted to evaluate average specific resistance, porosity, and moisture percentage of filter cake. Shirato's technique of compression-permeability test was followed for the pressure range lower than about $10^2N/m^2$. The flocculation effects on sludge dewatering was also examined for ferric chloride and polymeric flocculant. The application of hydrated lime which can be used for flue-gas desulfurization showed improved moisture percentage, and was thought to have positive feasibility in combined system of sludge dewatering and incineration. Determined characteristic constants were applied to Tiller's cake filtration model to simulate liquid pressure distribution and porosity distribution in cake. Model simulations showed a sharp drop of the porosity close to the cake-medium interface for the highly compressible material such as the activated sludge and the anaerobically digested sludge.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.299-304
• /
• 2005

The two major tannins were separated by Sephadex LH-20 and MCI-gel CHP-20 from peel of astringent persimmon fruits. Purified tannins were identified to (+)-catechin and (+)-gallocatechin by NMR, IR spectrum and FAB-mass spectrum. The removal rate of turbidity, T-N, T-P and CODcr in wastewater with lime and (+)-gallocatechin was higher than those of (+)-catechin because (+)-gallocatechin has more hydroxyl groups. As increasing concentration of tannins from peel of astringent persimmon fruits, the removal rate of turbidity, T-N, T-P and CODcr were increased. Synergistic activity by mixed tannins(catechin+gallocatechin) was also observed.

• Journal of Animal Environmental Science
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2006

The effects of turning frequency were examined on the efficiency of composting lime treated excess sludge amended with sawdust from the activated sludge process after a liquid/solids separation process. The raw and excess sludge from the activated sludge process associated with the hog wastewater treatment system is a significant problem and composting is an effective method far reducing the pollution potential of hog wastewater sludge. The coagulant used sludge composting and ammonia emissions from composting are not well established. The effect of compost properties such as high total carbon, C/N ratio and pH value on performance of composting sludge and biofiltration of ammonia from composting process were investigated. The ammonia emission was not significantly increased during composting. The ammonia concentrations of the exhaust air of composter were ranged from 0.5 and 7 ppm about 12 days after composting. The performance of the hog wastewater sludge composting was the most sensitive to chemical treated sludge properties such as high total carbon and high C/N ratio of the initial compost mixes. Temperature in compost and ammonia emission were not greatly affected by the turning frequency.

• Korean Journal of Materials Research
• /
• v.28 no.10
• /
• pp.564-569
• /
• 2018

$Cu_2ZnSn(S,Se)_4$ (CZTSSe) films were prepared on Mo coated soda lime glass substrates by sulfo-selenization of sputtered stacked Zn-Sn-Cu(CZT) precursor films. The precursor was dried in a capped state with aqueous NaOH solution. The CZT precursor films were sulfo-selenized in the S + Se vapor atmosphere. Sodium was doped during the sulfo-selenization treatment. The effect of sodium doping on the structural and electrical properties of the CZTSSe thin films were studied using FE-SEM(field-emission scanning electron microscopy), XRD(X-ray diffraction), XRF(X-ray fluorescence spectroscopy), dark current, SIMS(secondary ion mass spectrometry), conversion efficiency. The XRD, XRF, FE-SEM, Dark current, SIMS and cell efficiency results indicated that the properties of sulfo-selenized CZTSSe thin films were strongly related to the sodium doping. Further detailed analysis and discussion for effect of sodium doping on the properties CZTSSe thin films will be discussed.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.133-143
• /
• 2004

Simultaneous removal technology of particulate/NOx/SOx/HCl using CuO/3Al$_2$O$_3$ㆍ2SiO$_2$catalyst impregnated ceramic candle filters is an advanced air pollution process and provides significantly to reduce hazardous gases emitted from coal-fired power plant. This process uses a high-temperature catalytic filter for integrating SOx and HCl reduction through injection an alkali sorbent (such as hydrated lime or sodium bicarbonate), NOx removal through ammonia injection and selective catalytic reduction (SCR), and particulate collection on the catalytic filter surface. The advantages of the process include : compact integration of the emission control technologies into a single component; easy handling of dry sorbent and by-product; and improved SCR catalytic life due to lowered SOx, HCl and particulate levels. CuO/3Al$_2$O$_3$ㆍ2SiO$_2$ catalyst impregnated ceramic candle filters showed a possibility of simultaneous treatment from results which have ascertained high removal efficiency at various combined gases conditions, and in pilot plant test for 3 months, NO conversion was showed 90% over.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.237-242
• /
• 1988

Ion exchange behavior of glasses was investigated in this study. The used glasses were Soda-limesilica glasses that was produced by float process. In order to analyse effects of ion exchange, some properties were measured; $K^+$ ion penetration depth, compressive stress, compression layer thickness, amount of $K^+$ ion exchange and density, in case of 43$0^{\circ}C$-8h and 45$0^{\circ}C$-6h, and activation energy is 17.0kcal/mole. Further it can be seen that excessive heat treatment brings about stress relaxation.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.684-687
• /
• 2011

In this study, we investigate the photovoltaic performance of transparent conductive indium tin oxide (ITO), titanium-doped indium oxide (ITiO), and fluorine-doped tin oxide (FTO) films. ITO and ITiO films are prepared by radio frequency magnetron sputtering on soda-lime glass substrate at $300^{\circ}C$, and the FTO film used is a commercial product. We measure the X-ray diffraction patterns, AFM micrographs, transmittance, sheet resistances after heat treatment, and transparent conductive characteristics of each film. The value of electrical resistivity and optical transmittance of the ITiO films was $4.15{\times}10^{-4}\;{\Omega}-cm$. The near-infrared ray transmittance of ITiO is the highest for wavelengths over 1,000 nm, which can increase dye sensitization compared to ITO and FTO. The photoconversion efficiency (${\eta}$) of the dye-sensitized solar cell (DSC) sample using ITiO was 5.64%, whereas it was 2.73% and 6.47% for DSC samples with ITO and FTO, respectively, both at 100 mW/$cm^2$ light intensity.

• Membrane and Water Treatment
• /
• v.12 no.2
• /
• pp.83-93
• /
• 2021

In this study, defluoridation efficiency by aluminium sulphate (alum) and polyaluminium chloride (PACl) were compared for recommended Nalgonda dose (100%) and 80% of this dose in both batch and continuous modes. The residual turbidity was found to be higher in case of alum as compared to PACl with 80% dose representing lesser efficient settling of suspensions, which primarily comprise alumino-fluoro complexes that result in high residual aluminium in the treated water and this was confirmed by TEM and Zeta analysis. Moreover, the application of PACl also resulted in much lesser addition to the TDS and also required lesser lime for pH compensation due to its lower acidity. Hence this reduced dose was recommended for defluoridation. It was also observed that in case of alum, residual aluminium in treated water was 0.88 mg/L (100% dose) & 0.72 mg/L (80% dose) and in case of PACl, it was 0.52 mg/L(100% dose) & 0.41 mg/L(80% dose). After subsequent microfiltration, residual aluminium was 0.28 & 0.21 mg/L for 100% & 80% dose respectively and in case of alum and in case of PACl, it was 0.16 & 0.11 for 100% & 80% dose respectively, which conform to the Al standards(<0.2 mg/L).

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.919-929
• /
• 2016

This study investigated the effect of organic materials (Bordeaux, Loess-sulfur) and the removal of apical shoot against downy mildew disease on cucumber cultivated in greenhouse. Five kinds of Bordeaux were made by adjusting mixing ratio of lime and copper sulfate in order to elucidate the optimal combination. The 4-6type Bordeaux was selected as the most effective combination for controlling cucumber downy mildew. Loess-sulfur showed inhibitory activity against cucumber downey mildew, but it was less effective than Bordeaux. It was confirmed that apical shoot cutting could reduce the incidence of cucumber downy mildew disease by 56.3%. When apical shoots of susceptible cucumber variety were cut at different leaf stages, disease incidence by early apical shoot cutting treatment was lower than that of late apical shoot cutting treatment. However in a resistant variety, 'Heukryungsamcheok', disease incidences of all cucumber apical shoot cutting treatments were lower than that of non-cutting treatment, but there was no differences between apical shoot cutting treatments due to low disease incidences. In addition, when organic materials and apical shoot cutting treatment were carried out in parallel, the combined treatments of organic materials and apical shoot cutting showed low disease incidence of cucumber downy mildew compared to untreated control. The lowest disease incidence of cucumber downy mildew was recorded in the combined treatment of 4-6type Bordeaux and apical shoot cutting. This study confirmed that apical shoot cutting can reduce the disease incidence of cucumber downy mildew and the combined treatment of apical shoot cutting and organic materials showed higher suppressive effect against cucumber downy mildew.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.864-871
• /
• 2010

At the current situation of continuous utilization of heavy metal contaminated upland for agricultural purpose in Korea, minimizing transport of heavy metals from soil to crops is important for securing safety of human health. The present study (in field scale) examined the efficiency of several soil amendments (dolomite, steel slag, lime, zeolite, and compost) on reduction of phytoavailable heavy metals (Cd, Cu, Pb, and Zn) in soil through comparison with no amendment treatment and clean soil cover treatment. For determination of the phytoavailability, 1 M $NH_4NO_3$ extraction and red pepper cultivation were introduced. Among the amendments, in general, dolomite and steel slag were the most effective in reduction of metal (Cd, Pb, and Zn) phytoavailability resulting in less accumulation of these metals in shoot and fruit of red pepper. However, dolomite and steel slag treatment was not as effective as clean soil cover treatment which showed the least metal accumulation in red pepper fruit. Nevertheless, with taking into account the cost, treatment of dolomite or steel slag can be competitive method because the current study showed that dolomite or steel slag treatment reduced accumulated heavy metal concentration effectively in both shoot and fruit of red pepper compared to those from control soil and the concentration in fruit was within the standard value (<0.2 mg $kg^{-1}$ for both Cd and Pb).