• 한국의류학회지
• /
• 제38권3호
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권11호
• /
• pp.1686-1694
• /
• 2019

Objective: Lignin plays a relevant role in the inhibition of cell wall (CW) structural carbohydrate degradation. Thus, obtaining accurate estimates of the lignin content in tropical plants is important in order to properly characterize the mechanism of lignin action on CW degradation. Comparing conflicting results between the different methods available for commercial use will bring insight on the subject. This way, providing data to better understand the relationship between lignin concentration and implications with tropical forage degradation. Methods: Five grass species, Brachiaria brizantha cv $Marand{\acute{u}}$, Brachiaria brizantha cv $Xara{\acute{e}}s$(MG-5), Panicum maximum cv Mombaça, Pennisetum purpureum cv Cameroon, and Pennisetum purpureum cv Napier, were harvested at five maturity stages. Acid detergent lignin (ADL), Klason lignin (KL), acetyl bromide lignin (ABL), and permanganate lignin (PerL) were measured on all species. Lignin concentration was correlated with in vitro degradability. Results: Highly significant effects for maturity, lignin method and their interaction on lignin content were observed. The ADL, KL and ABL methods had similar negative correlations with degradability. The PerL method failed to reliably estimate the degradability of tropical grasses, possibly due to interference of other substances potentially soluble in the $KMnO_4$ solution. Conclusion: ADL and KL methods use strong acid ($H_2SO_4$) and require determination of ash and N content in the lignin residues, therefore, increasing time and cost of analysis. The ABL method has no need for such corrections and is a fast and a convenient method for determination of total lignin content in plants, thus, it may be a good option for routine laboratory analysis.

• 미생물학회지
• /
• 제24권3호
• /
• pp.323-328
• /
• 1986

To clarify the effects of several carbohydrates on the biodegradation of lignin by Pleurotus ostreatus. The strain was cultured on the media formulated with lignin and carbohydrates such as cellulose, xylan, collobiose, glucose and xylose, which was added individually. The culture mixtures grown 36 days were filtered and then estimated the degree of lignin biodegradation. It was found that the growth of P. ostreatus was stimulated and the depoly-merization was also increased by the addition of carbohydrates. When the carbohydrates were not added, polymerization was apparent in stead of depolymerization. In the case of glucose as an added carbohydrate, the content of lignin by the nitrosolignin method was greatly (about 7.4 times) decreased than control which contains lignin as a carbon source. The peak of lignin at 280nm in UV spectra was decreased about 27% after 27 days of culture. As results, it was assumed that lignin biodegradation was correlated to the carbohydrates and especially glucose was very significant role in lignin degradation.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.103-108
• /
• 1991

세포간층 lignin은 2차벽 lignin(end-wise-polymer)에 비해 축합도가 높으며 guaiacyl type의 phenol성 수산기등 말단기를 많이 갖는 2차벽 lignin보다 저분자량의 bulk polymer형 lignin이다.

• 임산에너지
• /
• 제23권1호
• /
• pp.45-68
• /
• 2004

The word of lignin is derived from the Latin word 'ligum' meaning wood. Lignin is complex polymer consisting of coniferyl alcohol, sinapyl alcohol and p-coumaryl alcohol unit and has an amorphous, three dimensional network structure which is hard to be hydrolyzed by acid. Lignin is found in the cell wall of plants lignified. The mode of polymerization of these alcohols in the cell wall lead to a heterogeneous branched and cross-linked polymer in which phenyl propane units are linked by carbon-carbon and carbon-oxygen bonds. This polymerization of precursors, p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol to lignin is formed by enzymic dehydrolyzation. The reaction is initiated by an electron transfer which results in the formation of resonance-stabilized phenoxy radical. The combination of these radicals produces a variety of dimers, trimers and oligomers and so on. Lignin research has been divided into basic and practical application field. The basic studies contains biosynthesis, chemical structure, distribution in the cell wall and reactivity by reductants, oxidants and organic solvents. The application research will be approached the reaction of lignin in various pulp making involving pulp bleaching and its effect on pulp qualities. Lignin also will be studied for the production of fine chemicals, polymer products and the conservation into an energy source like petroleum oil because the amount of lignin produced in pulp making process is more than 51,000,000 tons per year in the world. Both basic and application research must lay emphasis on the development for the utilization of lignin and the pulping process. But these researches can not be completed without understanding lignin structure containing functional groups. Therefore, this paper was focused on the review of lignin formulation which has been studied since 1948 in chronological order. This review was based on monomers, dimers, trimers and tetramers of phenyl propane unit structures which were isolated and identified by different methods from various wood.ious wood.

• Journal of the Korean Wood Science and Technology
• /
• 제12권3호
• /
• pp.35-40
• /
• 1984

지리산산(智異山産) 침엽수재(針葉樹材) 10개(個) 수종(樹種)에 대(對)한 AcBr lignin의 UV spectrum을 조사(調査)하여 본 바 각(各) 수종(樹種) 모두 spectrum curve의 정점(頂點)은 249nm(Max. peak), 267-268nm(Shallow min. peak), 280nm(Lower max. peak)에 있었으며 Bjorkman lignin이나 lignin sulfonic acid 등(等)의 UV spectrum 상(上)에서 볼 수 있는 견(肩)은 AcBr lignin의 spectrum curve 상(上)에서는 볼 수 없었으며 각(各) 정점(頂點)의 10개(個) 수종(樹種) 평균(平均) 흡광도(吸光度)와 흡광계수(吸光係數)는 249nm에 각각(各各) $0.367{\pm}0.0015$, $24.56{\pm}0.0535$, 267-268nm에서 $0.278{\pm}0.0016$, $18.50{\pm}0.0569$ 였고 280nm에서는 $0.306{\pm}0.0016$, $20.42{\pm}0.0627$ 이었다.

• 생명과학회지
• /
• 제12권4호
• /
• pp.392-398
• /
• 2002

Lignocellulose 분해 이용을 위해 토양 등에서 lignin분해 능력이 우수한 세균을 분리 및 동정함으로서 방향족 화합물의 이용을 위한 생물전환의 기초를 확보하고자하였다. 토양 등의 시료로부터 38주의 리그닌 분해 균주를 분리하였다. 분리된 LG2를 공시 균주로 선정하여 형태학적, 배양학적 및 생리학적 특성을 조사한 결과 Pseudomonas sp. LG2로 명명하였다. 이 균주는 리그닌을 분해 할 수 있었으며, 리그닌 함유 배지에 배양하여 배양 분해 산물을 HPLC로 분석한 결과 다수의 방향족 화합물을 생산하였다 Poylacrylamide gel활성 분석에 의해서 3종류로 구성된 peroxidase가 조사되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.13-20
• /
• 1995

This study was carried out to investigate the characterization of lignins from waste liquors in SP, KP, ASAM, and AS from Pinus densiflora, Quercus mongolica, and Betula ermanii. Spectroscopic study was applied to examine the lignins separated from different pulping process. Lignin contents in waste liqours increased in order of AS, ASAM, KP, and SP. UV spectra of three types of lignin except AS lignin showed similar pattern. IR spectra of AS lignin showed strong C=O absorptions in the range from 1730 to 1750$cm^{-1}$, where as those of KP, SP, and ASAM showed weak stretch in this region. NMR spectra of AS lignin showed strong characteristic chemical shifts of acetoxyl groups of acetylated aliphatic and aromatic hydroxyl groups at 2.0~2.5 ppm. Molecular weight of ASAM lignin from Pinus densiflora determined and found number average molecular weight 1,199, weight average molecular weight 5,458. z average molecular weight 17,242, and viscosity average molecular weight 5,457. It is considered from the results based on spectroscopic study of lignin that waste liquors (in SP, KP, ASAM and AS) from Pinus densiflora, Quercus mongolica, and Betula ermanii can be used for lignin utilization.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.442-450
• /
• 2019

Despite its potential as a renewable source for fuels and chemicals, lignin valorization still faces technical challenges in many aspects. Overcoming such challenges associated with the chemical recalcitrance of lignin can provide many opportunities to innovate existing and emerging biorefineries. In this work, we leveraged a biomass genetic engineering technology to produce phenolic aldehyde-rich lignin structure via downregulation of cinnamyl alcohol dehydrogenase (CAD). The structurally altered lignin obtained from the Arabidopsis thaliana CAD mutant was pyrolyzed to understand the effect of structural alteration on thermal behavior of lignin. The pyrolysis was conducted at 400 and $500^{\circ}C$ using an analytical pyrolyzer connected with GC/MS and the products were systematically analyzed. The results indicate that aldehyde-rich lignin undergoes fragmentation reaction during pyrolysis forming a considerable amount of C6 units. Also, it was speculated that highly reactive phenolic aldehydes facilitate secondary repolymerization reaction as described by the lower yield of overall phenolic compounds compared to wild type (WT) lignin. Quantum mechanical calculation clearly shows the higher electrophilicity of transgenic lignin than that of WT, which could promote both fragmentation and recondensation reactions. This work provides mechanistic insights toward biomass genetic engineering and its application to the pyrolysis allowing to establish sustainable biorefinery in the future.

• 산업기술연구
• /
• 제21권A호
• /
• pp.343-349
• /
• 2001

This study characterizes the growth of white rot fungi Phanerochaete chrysosporium IFO 31249) and lignin peroxidase(LiP) activity in different submerged culture media. P. chrysosporium was grown in the form of pellet of various sizes from a spore inoculum under shaking liquid culture condition. While the growth of mycelia was higher under the nitrogen-sufficient culture than under the nitrogen-limited culture, ligninase activity was relatively lower. The lignin peroxidase appeared in nitrogen-limited culture and was suppressed by excess nitrogen. High level(40U/l) of lignin peroxidase activity was obtained in the growth medium containing 1.5mM veratryl alcohol, a secondary metabolite of P. chrysosporium. Lignin peroxidase production was not observed under conditions of nitrogen sufficiency or in balanced media, suggesting that control parameters could increase the activity by manipulating the secondary metabolism.