• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.68-75
• /
• 2017

Demand for dwarf mondo grass (DMG; Ophiopogon japonicus 'Nanus') as an ornamental garden plant is expected to grow in the future. The purpose of this study was to investigate the levels of shade tolerance and ground cover by growing DMG under a variety of shade conditions for 18 months (May 2015~October 2016). DMG plants grown in bare ground for 3 years in Jangheung-gun, Jeonnam were used for testing. In an experimental site created in Naju city in Jeonnam, the DMG was planted in planters ($70cm{\times}70cm{\times}24cm$) and covered with a shading curtain to block natural light. Shaded conditions were then arranged under different levels of shade (0%, 55% and 75%). When the plants were grown, growth (leaf size, the number of leaves, fresh weight and dry weight) and ground coverage of DMG were analyzed. According to the results, DMG growth in terms of leaf size and the number of leaves was statistically higher under zero shade (full sunlight), when compared to other shaded conditions. DMG's fresh and dry weights were significantly greater under 0% and 55% shade, compared to those under 75% shade. The degrees of shade tolerance required for normal growth of DMG were found in the range of 0~50%, meaning that more than 50% shade may decrease plant growth. There were no statistical differences in ground coverage rates of DMG under different levels of shade. When 220 tillers were planted per $1m^2$ of plot, up to 80% of the area was covered by DMG after 18 months. Since DMG requires nutrient-rich soil to grow, sufficient nitrogen fertilizers are proposed to accelerate the ground cover of DMG. As DMG remained alive over the winter in the experiments, this study also suggests that DMG can be planted in the southern temperate region.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.207-212
• /
• 2022

The optimal culture conditions for root organogenesis from the callus of peonies (Paeonia lactiflora Pall.) were investigated. Root explants with vascular bundles were cultured in Murashige and Skoog (MS) medium combined with 0.5-4.0 mg/L auxins (indole acetic acid [IAA], naphthalene acetic acid [NAA], indolebutyric acid [IBA], and 2,4-dichlorophenoxyacetic acid [2,4-D]) and 0.0-2.0 mg/L cytokinins (kinetin, zeatin, and benzylaminopurine [BAP]) to induce callus formation. The callus was then cultured in MS medium combined with three concentrations (0.1, 0.5, and 1.0 mg/L) of IAA, NAA, IBA, kinetin, zeatin, and BAP in the dark for 6 weeks. Based on the results, the effects of dark and light conditions on the callus cultured in MS medium with combinations of 0.1-1.0 mg/L IBA and zeatin for 6 weeks were studied. Callus formation was most effective (>+++) in the medium with a combination of 1.0 mg/L NAA and 1.0 mg/L zeatin. A high number of long adventitious roots were observed in the mediums with 0.1 mg/L IBA (6.66 and 4.82 cm) and 0.5 mg/L zeatin (2.32 and 0.72 cm) among auxins and cytokinins, respectively. The highest number (14.06) of adventitious roots were formed from the callus cultured in light in the MS medium combined with 0.1 mg/L IBA and 0.5 mg/L zeatin. This same medium induced the formation of the longest adventitious root (5.45 cm) in the dark. Thus, optimization of in vitro culture conditions may be possible for the mass propagation of adventitious roots in peonies.

• The Journal of Information Systems
• /
• v.31 no.3
• /
• pp.177-195
• /
• 2022

Purpose This paper aims to prepare a full operational readiness by establishing an optimal flight plan considering the weather conditions in order to effectively perform the mission and operation of military aircraft. This paper suggests a flight prediction model and rules by analyzing the correlation between flight implementation and cancellation according to weather conditions by using big data collected from historical flight information of military aircraft supplied by Korean manufacturers and meteorological information from the Korea Meteorological Administration. In addition, by deriving flight rules according to weather information, it was possible to discover an efficient flight schedule establishment method in consideration of weather information. Design/methodology/approach This study is an analytic study using data mining techniques based on flight historical data of 44,558 flights of military aircraft accumulated by the Republic of Korea Air Force for a total of 36 months from January 2013 to December 2015 and meteorological information provided by the Korea Meteorological Administration. Four steps were taken to develop optimal flight prediction models and to derive rules for flight implementation and cancellation. First, a total of 10 independent variables and one dependent variable were used to develop the optimal model for flight implementation according to weather condition. Second, optimal flight prediction models were derived using algorithms such as logistics regression, Adaboost, KNN, Random forest and LightGBM, which are data mining techniques. Third, we collected the opinions of military aircraft pilots who have more than 25 years experience and evaluated importance level about independent variables using Python heatmap to develop flight implementation and cancellation rules according to weather conditions. Finally, the decision tree model was constructed, and the flight rules were derived to see how the weather conditions at each airport affect the implementation and cancellation of the flight. Findings Based on historical flight information of military aircraft and weather information of flight zone. We developed flight prediction model using data mining techniques. As a result of optimal flight prediction model development for each airbase, it was confirmed that the LightGBM algorithm had the best prediction rate in terms of recall rate. Each flight rules were checked according to the weather condition, and it was confirmed that precipitation, humidity, and the total cloud had a significant effect on flight cancellation. Whereas, the effect of visibility was found to be relatively insignificant. When a flight schedule was established, the rules will provide some insight to decide flight training more systematically and effectively.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.572-583
• /
• 2023

Demand for wood in construction is increasing worldwide. In Korea, technical reviews of high-rise Cross Laminated Timber (CLT) buildings are under way. In this paper, Floor Impact Sound Insulation Performance (FISIP) and Transmission Loss (TL) of 150 mm thick CLT floor panels made of two domestic species, Larix kaempferi and Pinus densiflora, are investigated. The CLT slabs were tested in reverberation chambers connected vertically. When comparing Single Number Quantity (SNQ) of FISIP of the bare panels, the Larix CLT is 3 dB lower in heavy-weight and 1 dB in light-weight than the Pinus CLT. However, there was no difference when concrete toppings were added to improve the performance. As the concrete toppings became thicker, the heavy-weight was reduced by 9 dB ~ 20 dB, and the light-weight by 20 dB ~ 30 dB. And the analysis of these results with area density has confirmed that the area densities are highly correlated (R² = 0.94 ~ 0.99) to the FISIP of the CLT. The types of CLT didn't affect the TL. Comparison of theoretical TL values with measured TL values has shown that the frequency characteristics are similar but 8 dB ~ 12 dB lower in measured values. The relationship between the TL and frequency characteristics of the tested CLT slabs was derived by using the correction value.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.

• Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.103-110
• /
• 2018

Backgrounds: In arid grasslands, wells are subject to heavy trampling and grazing pressure, which can increase vulnerability to local land degradation. To investigate trampling and grazing, we surveyed plant communities at three well sites in the desert steppe of Mongolia, using 1600-m line transects from the wells. The sites (Bshrub, Sshrub, and shrubL) differed by concomitant shrub type (big shrub, small shrub, and shrub-limited) and livestock pressure (light, medium, and heavy). A plant classification scheme based on edibility and morphology (rosette or creeping type) was used to separate grazing and trampling effects on plant communities. Results: Edible plants were dominant at all sites but a fraction of grazing- and trampling-tolerant plants increased in the order Bshrub, Sshrub, and shrubL, following livestock pressure. Clear transition zones from inedible to edible plant groups were recognized but at different locations and ranges among the sites. Trampling-tolerant plants explained 90% of inedible plants at Sshrub with camels and horses, but grazing-tolerant plants prevailed (60%) at shrubL with the largest livestock number. Plant coverage increased significantly along the transects at Bshrub and Sshrub but showed no meaningful change at shrubL. Herbaceous plant biomass showed significant positive and negative trends at Bshrub and shrubL, respectively. Conclusions: Both grazing and trampling can produce larger fractions of inedible plants; in this, camel and horses can have considerable effects on desert-steppe plant communities through trampling.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.171-182
• /
• 2016

Since FAO introduced the Globally Important Agricultural Heritage Systems(GIAHS) in 2002, 36 sites of 15 countries so far have been listed on GIAHS. This study aims to find the important agricultural heritages of Korea and to prepare the methods for them to be selected as GIAHS. We have analyzed the proposals of the 36 GIAHS listed in order to study the characteristics of their components of the agricultural heritage which worked for being selected. To analyze the components of the agricultural heritage first, agricultural heritage was classified into 13 types and 42 components in light of GIAHS criteria. Then central themes were set to analyze the relevant contents in the proposals. They were, the type of GIAHS Site, significant agricultural landscape, the agriculture-forestry-fisheries-livestock linkage systems, the multi-layered, inter-cropping, circulation cultivation systems, the soil and water management systems, the conservation of agrobiological diversity and genetic resources, the history of the agricultural heritage, the succession of traditional farming techniques, the cultural diversity and so on. Most GIAHS are located in mountains, grasslands, rivers and coasts, desert than in plains, through which GIAHS assure us that it is the heritage of human challenge to overcome the harsh geographic environment and maintain a livelihood. In these sites the traditional farming techniques are carried on, such as mountain clearings, terraced rice paddies, and burn fields, and the unique irrigation systems and agricultural landscapes are well maintained, and the eco-friendly traditional farming techniques utilizing abundant forest resources and agriculture are well handed down. The origin or home of crop growing, a variety of genetic crop storage, the world's largest crop producer and preserving cultural diversity are also important factors for the selection.

• The Journal of the Korea Contents Association
• /
• v.20 no.5
• /
• pp.291-302
• /
• 2020

Korean popular music industry, which is lead by "Idol group", has forsaken their fandom all over the world. Therefore, idol groups has become not only an artist but also the most influential people in the Korean economy. A global idol group with a strong fandom can earn more than a trillion-dollar by attracting their global fan's interest in Korea. In other words, it is considerably important to carry the idol to a successful conclusion. This study tries to expect whether the idols can be survived or not at a certain point after their debut by ANN, Decision Tree, Random Forest. We decide that certain point as the three-year and eight-year after their debut, because it is their break-even point year and the year after their average renewal of the contract. In addition, this study also explains which feature is the most important to their survival by feature importance and Logistic regression. In conclusion, features like the number of idol competitors, the number of debut members and the number of the genre are significant. These results shed light on the efficient management of K-Pop idol to improve industrial competitiveness.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.211-220
• /
• 2013

The nailed joints in wood construction are commonly designed to resist and carry the lateral load but also subject to withdrawal force like uplift load due to the wind. This research was conducted to evaluate the performance of nailed joint composed of dimension lumber and sheathing materials through the nail withdrawal and unsymmetric double shear joint test, and then compared to current design values. The withdrawal strength was greatly dependant on wood specific gravity, and the withdrawal strength of I-joist with OSB showed higher value in spite of low specific gravity. The maximum withdrawal loads were greater than that of derived current design values about 5 times. The lateral resistance of Japanese larch/OSB nailed joints was higher than that of SPF/OSB nailed joint, and derived allowable lateral strength of nailed joints in this study exceeded the current design values. The failure mode of nailed joints was primarily due to the nail bending and this tendency was notable in SPF/OSB nailed joint.