• Journal of Ginseng Research
• /
• v.36 no.2
• /
• pp.198-204
• /
• 2012

An light-emitting diode (LED)-based light source was used as a monochromatic light source to determine the responses of raw ginseng roots (Panax ginseng Meyer) to specific emission spectra with respect to the production of ginsenosides. The ginsenoside content in the ginseng roots changed in response to the LED light treatments at $25^{\circ}C$ relative to the levels in the control roots that were treated in the dark or at $4^{\circ}C$ for 7 d. Ginseng roots were exposed to LEDs with four different peak emission wavelengths, 380, 450, 470, and 660 nm, in closed compartments. Compared with the control $4^{\circ}C$-treated roots, roots that were treated with 450 and 470 nm light showed a significantly increased production of ginsenosides (p<0.05), with increases of 64.9% and 74.1%, respectively. The contents of the ginsenosides $Rb_2$, Rc, and $Rg_1$ were significantly higher (p<0.05) in the 450 and 470 nm-treated root samples. The ratio of protopanaxadiol ginsenosides ($Rb_1$, $Rb_2$, Rc, and Rd) to protopanaxatriol ginsenosides ($Rb_1$, $Rb_2$, Re, and Rf) was significantly higher (p<0.05) in the 450 and 470 nm-treated root samples than in the control $4^{\circ}C$-treated roots. This is the first report that demonstrates the increase and conversion of ginsenosides in raw ginseng roots in response to exposure to LED light.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.1-19
• /
• 1998

After polymerizing composite resin with argon laser and visible light, four test, to be concretely, measurement of compressive strength using Instron testing machine, surface microhardness using Rockwell hardness tester, quantitative analysis of residual monomer using HPLC and analysis of degree of conversion using FTIR, were accomplished. Test groups were a sort of specimen with 3mm diameter, 4mm thickness for measuring compressive strength, two sort of specimen with 7mm diameter, 2mm and 3mm thickness for measuring surface microhardness, quantitative analysing of residual monomer after curing and measuring the degree of conversion, each were divided by six groups according to the condition of light exposure. In case of argon laser, in 1.0W and 0.5W output, the exposure time for specimen were 5 sec, 10 sec respectiyely. In case of visible light, the exposure time for specimen were 20 sec, 40 sec respectively. The test were accomplished and following results were obtained. 1. Compressive strength of composite resin was the highest in the group of 1 W output, exposing for 10 sec with argon laser, followed by the group of 0.5W, exposing for 10 sec with argon laser, the group of exposing for 40 sec with visible light. But there were statistically no significant difference between these three groups(p>0.05). 2. Surface microhardness of composite resin wasn't significantly affected by light curing conditions. 3. BIS-GMA within residual monomer was least detected in the group of exposing for 40 sec. TEGDMA was least detected in the group of 1 W output, exposing for 10 sec with argon laseboth 2mm and 3mm thickness specimen. 4. The degree of conversion of all groups in the 2mm thickness specimen were more than 50%, similar to each other but in the group of 1W, exposing 10 sec with argon laser the degree of conversion was highest in the 3mm thickness specimen. 5. Argon laser could make composite resin to has similar properties with 25% lesser exposure time than visible light.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1462-1467
• /
• 2018

A number of algorithms for improving the image quality of low light images have been studied using a single image or multiple exposure images. The low light image is low in contrast and has a large amount of noise, which limits the identification of information of the subject. This paper proposes the hardware design of algorithms that improve the quality of low light image using 2 multiple exposure images taken with a dual camera. The proposed hardware structure is designed in real time processing in a way that does not use frame memory and line memory using transfer function. The proposed hardware design has been designed using Verilog and validated in Modelsim. Finally, when the proposed algorithm is implemented on FPGA using xc7z045-2ffg900 as the target board, the maximum operating frequency is 167.617MHz. When the image size is 1920x1080, the total clock cycle time is 2,076,601 and can be processed in real time at 80.7fps.

• Journal of radiological science and technology
• /
• v.42 no.5
• /
• pp.373-377
• /
• 2019

Radiation exposure is on the rise as the working hours of radiation workers increase. Accordingly, the importance of protection products for decreasing the dose of exposure has risen, and excellent X-ray shielding ability and light weight are required. The purpose of this study is to compare the Pb which use currently and other elements in order to reduce the exposure of workers to the most effective protection products. For experiment, we used the general X-ray equipment and angiography equipment, and obtained the Pb and apron's shielding rate. When the shielding rate of Pb and apron was compared in general X-ray equipment, the shielding rate was 95.1% for Pb 0.5 mm, 96.1% for apron 0.5 mmPb and 95.6% for Bi+W 0.5 mmPb. When compared the shielding rate of each aprons in angiography equipment, 0.5 mmPb apron was the highest as 96.4% and Bi+W 0.25 mmPb apron was the lowest as 90.2% at the 50 cm distance. The shielding rate of 0.5 mmPb apron was the highest as 95.7% and Bi+W 0.25 mmPb apron was the lowest as 85.9% at the 100 cm distance. As a result of evaluating the apron efficiency through this study, 0.5 mmPb apron showed the best shielding rate, but it was the heaviest apron. 0.35 mmPb apron and Bi+W 0.25 mmPb apron weighed light but had low shielding rate. Through the results of this experiment, it is recommended that radiation workers reduce radiation exposure by using more efficient protection products.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.475-481
• /
• 1999

The study of lignin, a major component of secondary cell wall, has been partly focused on its removal from the woody part in the kraft pulping industry. Cinnamyl alcohol dehydrogenase (CAD; EC 1.1.l95) catalyzes the synthesis of cinnamyl alcohols from corresponding cinnamaldehydes. A cDNA clone, MdCADl, encoding putative CAD from apples (Malus domestica Borkh. cv Fuji) was characterized in this study. The clone contains an open reading frame of 325 amino acid residues, which shows a greater than 80％ identity with Eucalyptus CADl. MdCADl mRNA was detectable in vegetative tissues and was strongly expressed in the fruit. The expression pattern of MdCADl mRNA in the fruit peel after light exposure was also examined. The mRNA was rapidly increased until 1 day after light exposure and remained stable thereafter, suggesting that MdCADl is light inducible. The inducibility of the MdCADl gene was examined using several environmental stresses. Mechanical wounding of leaves increased the MdCADl mRNA level and the induction was further increased by salicylic acid. Southern blot hybridization showed that there is either one or a few copies of CAD genes in apples. To our knowledge, it is believed that MdCADl is the first CAD clone expressed predominantly in fruit.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.115-119
• /
• 1994

White mutant of Ganoderma lucidum(G4142) induced the non-basediocarpous basidiospores(NBB) from the aerial mycelia on agar media by the light illumination. Light was found to be necessary for NBB formation, but it also inhibited the growth of mycelium. The best sporulation was obtained at the periodic exposure of 16 hour light and 8 hour dark. Blue and yellow light were the most effective on sporulation, however, near UV and red light did not induce any spores. Effective light intensity for NBB bearing was about 1,000 lux as white light. Even after 16 days of culture, this strain did not form the pinhead nor chlamydospore. Optimum temperature for the mycelial growth and NBB formation were 30$\circ $C. Ganoderma lucidum G4142 exhibited the formation of stroma after five days of incubation at 30$\circ $C.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.181-188
• /
• 2020

This study was conducted to identify the optimal conditions for seedling growth in Veronica rotunda var. subintegra (Nakai) T.Yamaz. which a endemic plant and can be development as ornamental plants. We sowed V. rotunda var. subintegra (Nakai) T.Yamaz. seeds, and exposed the seedling was different treatment conditions. We varied soil type and fertilizer concentration, shading ratio, additional fertilizer concentration, pretreatment light exposure and collection time of seeds. We found that seedling growth was good in horticultural substrate (with no additional fertilizer), but mixed soils supplemented with fertilizer inhibited growth, regardless of the fertilizer concentration. In the 55% shading treatment, seedling growth was greater than in the non-shading treatment. High concentration addition of fertilizer (Hyponex) promoted plant growth, in terms of both plant length and fresh weight. Exposure of seeds to a red light-source prior to germination had a greater effect on seedling growth than exposure to other light sources. Seedlings exhibited better growth when grown from seed collected in 2018, rather than 2017.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.238.2-238.2
• /
• 2015

Surface modification of vertically-aligned carbon nanotube (VACNT) is essential in order to meet specific demands for particular applications such as field emission displays, heat dissipation device and potential sun energy conversion due to their superior electrical and thermal conductivity and strong light absorption. In this study, we observe the effect of exposure to water vapor on a different lengths of the surfaces of VACNT. The study was conducted on three different lengths of the VACNT: short length around $200{\mu}m$, medium-length around $500{\mu}m$, and high length around 1 mm. Water exposure time ranges between 2-10 min and temperature of the water ranges from 60 to 120 oC. The result of water vapor exposure mainly show that increasing the exposure time and water temperature give rise to increase of the speed of change on the surface of the VACNT. Especially, the shorter VACNT change their surface morphology most rapidly.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.1
• /
• pp.1-6
• /
• 2014

A set of exposure factors that reflects the characteristics of individual behavior capable of influencing exposure is essential for risk and exposure assessment. In 2007, the Korean Exposure Factors Handbook was, therefore, issued, driven by the need to develop reliable exposure factors representing the Korean population. The purpose of this study was to overview the development process of the Korean Exposure Factors Handbook and major recommended exposure values for the Korean population to allow information exchanges and comparison of recommended values among nations. The researchers reviewed the domestic data that could be used in the development of exposure factors, confirmed a knowledge gap, and set a priority of development by phases. A methodology to measure exposure factors was established to develop measuring techniques and test their validity. Data were processed or a survey was conducted according to the availability of data. The study thus produced recommended values for 24 exposure factors grouped by general exposure factors, food ingestion factors, and activity factors by setting up a database of exposure factors and carrying out statistical analysis. The study has significantly contributed to reducing the potential uncertainty of the risk and exposure assessment derived by the application of foreign data or research findings lacking representativeness or grounds by developing a set of exposure factors reflecting the characteristics of the Korean people. It will be necessary to conduct revisions in light of the changing statistical values of national data and the exposure factors based on Korean characteristics.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.133-140
• /
• 2013

The purpose of this study was to test the effectiveness of the light-shelf system combined with IT to save lighting energy in resident space. According to the multiple variables that affected intensity of illumination, various experiments were designed and conducted. The main findings of this study were following: (1)the optimal level of light-shelf system was formulated which met the appropriate range of intensity of illumination in living-room; (2)although the mixed light-shelf system indicated a high performance, it could often provide discomforts to residents according to the degree of exposure; (3)artificial lights using light-shelf system combined with IT showed a higher effectiveness than those using fixed light-shelf system displayed. This study provided initial information of light-shelf system formative processes that could contribute to the lighting energy diminution. Future studies should focus more on multiple approaches regarding different types of resident space planning.