• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.97-106
• /
• 2000

To develop the grain moisture meter using microwave free space transmission technique, a 10.5GHz microwave signal with the power of 11mW generated by an oscillar with a dielectric resonator is transmitted to an isolator and radiated from a transmitting $2{\times}2$ microstrip patch array antenna into the sample holder filled with the 12 to 26%w.b. of Korean Hwawung paddy rice. the microwave signal, attenuated through the grain with moisture, is collected by a receiving $2{\times}2$ microstrip patch array antenna and detected using a Shottky diode with excellent high frequency characteristic. A pair of light and simple microstrip patch array antenna for measurement of grain moisture content is designed and implemented on atenflon substrate with trleative dielectric constant of 2.6 and thickness of 0.54 by using Ensemble ver. 4.02 software. The aperture of microstrip patch arrays is 41 mm width and 24mm high. The characteristics of microstrip patch antenna such as grain. return loss, and bandwidth are 11.35dBi, -38dB and 0.35GHz($50^{\circ}$ at far-field pattern of E and H plane. The width of the sample holder is large enough to cover the signal between the antennas temperature and bulk density respectively. The calibration model for measurement of grain moisture content is proposed to reduce the effects of fluectuations in bulk density and temperature which give serious errors for the measurements . From the results of regression analysis using the statistically analysis method, the moisture content of grain samples (MC(%)) is expressed in terms of the output voltage(v), temperature (t), and bulk density of samples(${\rho}b$)as follows ;$$MC(%)\;=\;(-3.9838{\times}10^{-8}{\times}v^{3}+8.023{\times}10^{-6}{\times}v^{2}-0.0011{\times}v-0.0004{\times}t+0.1706){\frac{1}{{\rho}b}}{\times}100$ Its determination coefficient, standard error of prediction(SEP) and bias were found to be 0.9855, 0.479%w.b. and -0.0.369 %w.b. respectively between measured and predicted moisture contents of the grain samples.

• The Korean Journal of Zoology
• /
• v.28 no.3
• /
• pp.194-208
• /
• 1985

The ultrastructure of the integumental epidermis of Korean planaria (Dugesia japonica) is studied by light microscope, scanning electron microscope and transmission electron microscope. The planaria has mono-layered integumental epidermis in which most of cells exhibit irregularly columnar shape. The epidermal cells of the integument are classified into six types on the basis of cytochemical and ultrastructural characteristics. 1) Ciliated epithelial cells: These cells have cilia in their free surfaces. The axonemes of cilia exhibits fundamental 9+2 microtubular pattern. 2) Eosinophilic cells: These cells contain a few large eosinophilic granules. The core of eosinophilic granule is consisted of sparsely dispersed fibrillar structures in relatively electron-lucent ground material. 3) Mucous cells: These cells are filled with irregularly shaped, PAS-positive mucous granules which have an average size of $0.8\\times0.3 \\muM$. 4) Rhabdite-forming cells: These cells possess a few strongly-eosinophilic large rhabdite granules. The rhabdite granules are synthesized either in the rhabdite-forming cells which constitute integumental epidermis or in the corresponding cells which are developed in the parenchyma and later transferred to epidermal cells of integumental epidermis through basement membrane. 5) A-type of basophilic granule cells: These granule cells possess round or irregularly-shaped granules which are strongly stained with Alcian blue. These electron-dense granules have an average size of $1.5\\times1.0 \\muM$. This type of cells is derived from parenchymal tissue. 6) B-type of basophilic granule cells: These basophilic granule cells with PAS-positive granules, are found in the epidermis of lateral body wall. The granules, which are about $0.7\\times0.4 \\muM$ in size, occupying most part of this cell type are originated from the parenchyma.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.705-709
• /
• 2017

The electronic and optical characteristics of molybdenum disulphide ($MoS_2$) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of $MoS_2$ layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the $MoS_2$ layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the $MoS_2$. Optical microscopy works only when $MoS_2$ is on a silicon substrate covered with $SiO_2$ of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of $MoS_2$ layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of $MoS_2$ layers. This method can be used to characterize $MoS_2$ samples at nanometer-level spatial resolution, which is below the limits of other methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2014

The property improvement of polycarbonate coated with a multilayer film composed of an inorganic $SiO_2$ film and a photocatalytic $TiO_2$ film was studied. The $SiO_2$ film as a binder had an excellent light transmission characteristic. After the treatment with atmospheric pressure plasma, the surface of $SiO_2$ film showed the hydrophilicity, which increased the film coating uniformity with a $TiO_2$-containing aqueous solution. When $TiO_2$ film was over 200 nm thick, the absorption effect of UV rays in the range of 180~400 nm suppressed the yellowing phenomena of polycarbonate substrate. The inorganic film improved the heat resistance of polycarbonate substrates. $TiO_2$ film in the outmost under the exposure of UV rays promotes the catalytic oxidation characteristics and yields the capability to the decomposition of organic contaminants, and also increases the self-cleaning properties due to the increase of hydrophilicity. Structural stability of the polycarbonate substrate coated with inorganic $TiO_2$ and $SiO_2$ film was shown. The role of $SiO_2$ film between $TiO_2$ and polycarbonate substrate suppressed the peeling of $TiO_2$ film by inhibiting the photocatalytic oxidation effect of $TiO_2$ film on the polycarbonate substrate.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.190-195
• /
• 2011

To investigate the photon-trapping effect and scattering layer effect of $TiO_2$ multi-layer in dye-sensitized solar cell (DSSC) and the degree of recombination of electrons at the electrode treated $TiCl_4$, we formed electrodes of different conditions and obtained the most optimal electrode conditions. To estimate characteristics of the cell, IV curve, UV-Vis spectrophotometer, electrochemical impedance spectroscopy (EIS) and incident photon-to-current conversion efficiency (IPCE) were measured. As a result, we confirmed that the multi-layer's efficiency was higher than that of monolayer in the IV curve and the performance of $TiCl_4$ treated electrode was increased according to decreasing the impedance of EIS. Among several conditions, the efficiency of the cell with scattering layer is higher than that of a layer with the base electrode about 19%. Because the light scattering layer enhances the efficiency of the transmission wavelength and has long electron transfer path. Therefore, the value of the short circuit current increases approximately 10% and IPCE in the maximum peak also increases about 12%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.390-396
• /
• 2009

To select optimal shade material in paddy soil, growth characteristics and ginsenoside contents were investigated in new cultivar, 'Cheonpoong' of three-year-old ginseng cultured under three kinds of shade materials such as three-layered blue and one-layered black PE (polyethylene) net (TBPN), blue PE sheet (BPSS), and aluminium-coated PE sheet (APSS). The order of light transmission ratio and air temperature by shade materials were BPSS > APSS > TBSB among three shade materials. Average soil water tension in PDC and IDC was 64 mbar (absolute soil moisture, 25%) and 123 mbar (absolute soil moisture, 17%), respectively, and soil water tension in IDC was changed more distinctly than that of PDC by season and shade materials. Yield in PDC was distinctly decreased more than that in IDC because of the increase of discolored-leaf and rusted-root ratio. BPSS and TBPN among three shade materials were the most effective on the increase of yield in PDC and IDC, respectively. Ratio of rusty-colored root showed not significant difference by drainage class and shade materials. Contents of panaxatriol ginsenoside (Rg1, Re and Rf) were decreased in PDC, while it of panaxadiol ginsenoside (Rb1, Rc and Rd) were increased in IDC. Total ginsenoside contents of IDC was distinctly higher than that of PDC, and BPSS showed the highest contents among three shade materials regardless of poorly and imperfectly drainage class.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.189-206
• /
• 2015

The present study was conducted to investigate the oceanic characteristics of the northern East China Sea through identification of long-term variation patterns of oceanic environment factors, for the objective of gaining understanding of oceanic environment characteristics of the northern waters of East China Sea, which closely influence the oceanic environments of waters nearby South Korea. The study methodology included the use of oceanographic data (water temperature, salinity, dissolved oxygen, nutrients, and chlorophyll-a) on the northern East China Sea from the Korea Oceanographic Data Center (KODC), collected by season for 20 years between 1995 and 2014. Moreover, for the study on the distribution of nutrients, chlorophyll-a. The main water masses that affected the northern East China Sea during the study period were classified as Changjiang diluted water (CDW), Tiawan current warm water (TCWW), Yellow Sea cold water (YSCW), and Kuroshio source water (KW). The forces of CDW and TCWW that forms on the surface and sub-surface layers had weakened for 20 years and the force of KW that forms on the intermediate layer showed a distinctively decreasing trend. However, YSCW showed a trend of expanding its force. Phosphate and silicate exhibited a decreasing tendency and phosphate showed a pattern of being depleted on the surface layer after 2009. It is determined that one of the reasons for this is the concentration of nutrients introduced through CDW and TCWW being too low. The concentration of chlorophyll-a exhibited an increasing tendency during the study period, the reasons for which are determined to be the influences of increase in water temperature, supply of nutrients via YSCW, and increases in light transmission from decrease in suspended solid due to the construction of the Three Gorges Dam.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.99
• /
• pp.50-71
• /
• 2021

The Five-story Stone Pagoda from the Dongsa-ri Temple Site in Buyeo, dated to early Goyeo Dynasty, is valuable in that it is the southernmost example of the capital Kaesong pagoda style. This pagoda exhibits characteristics of the central Goryeo style featured in the pagodas built in and around the capital Kaesong, such as the diagonally curved section of the support for the cover stone above the upper stereobate. It also shares stylistic affinities with eleventh-century stone pagodas. The ansangmun (elephant eye patterns) in the lower stereobate of the Dongsa-ri Five-story Stone Pagoda resemble those in the pedestal of the Stone Seated Buddha (which was likely repaired in 1028 during the reign of King Hyeonjong), at the Jeongrimsa Temple site in Buyeo. It also reflects elements found in the flagpole supports from the Cheonheungsa Temple site in Cheonan. The sculpting techniques used in these patterns are also similar. Such congruencies suggest that the Dongsa-ri Five-story Stone Pagoda was built in the eleventh century. The Dongsa-ri Temple Site in Buyeo, located near the Geumgang River, served as a principal route for transporting grain-tax during the Goryeo Dynasty. It was also situated along the way to the Goryeo royal temple, Gaetaesa Temple. The geographical significance of the site and the extensive repairs undertaken at Jeongrimsa Temple during the reign of King Hyeonjong (r. 1009-1031) of the Goryeo Dynasty appear to have impacted the production of the Dongsa-ri Five-story Stone Pagoda. The Dongsa-ri Five-story Stone Pagoda also bears stylistic resemblances to the stone pagoda and flagpole supports found at neighboring Cheonheungsa Temple, which is presumed to be related to the establishment of Honggyeongsa (or Honggyeongwon) Temple in 1021 in Cheonan. This indicates the route of the transmission of the Kaesong pagoda style. The Five-story Stone Pagoda from the Dongsa-ri Temple Site pays testimony to the cultural accomplishments of eleventh-century stone artworks in Buyeo and adjacent regions. This pagoda embodies the majestic and assertive aesthetics that define of the Goryeo Dynasty, as do early Goryeo colossal Buddhist sculptures, including the Stone Standing Maitreya Bodhisattva at Daejosa Temple in Buyeo, the Stone Standing Buddha Triad at Gaetaesa Temple in Nonsan, and the Stone Standing Maitreya Bodhisattva at Gwanchoksa Temple in Nonsan. All of these bear similarities to the massive stone lantern and pagoda at Hyeonhwasa Temple in the capital Kaesong. The production of the light, sleek, sharp, and sophisticated Dongsa-ri Five-story Stone Pagoda is presumed to reflect the maturity of the cultural competence of the people in Dongsa-ri, Buyeo under the influence of Buddhist culture from the capital Kaesong during the eleventh century, a time marked by active cultural exchanges among regions.