• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.188-191
• /
• 2005

A common feature in various methods of optical interferometry for absolute distance measurements is the use of multiple monochromatic light components either in sequence or in parallel at the same time. Two or multiple wavelength synthesis has been studied though its performance is vulnerable to the frequency instability of the light source. Recently continuous frequency modulation is considered a promising method with availability of wide band tunable diode lasers, which also have frequency instability errors. We can lock frequencies of these third-party light sources to the modes of the femtosecond laser which is stabilized to the precision of the standard radio frequency. To this end, we have stabilized all the modes of the femtosecond laser to the atomic frequency standard by using powerful tools of frequency-domain laser stabilization.

• 제어로봇시스템학회논문지
• /
• 제22권10호
• /
• pp.811-816
• /
• 2016

In light of recently developed 3D printers for rapid prototyping, there is increasing attention on the 3D scanner as a 3D data acquisition system for an existing object. This paper presents a prototypical 3D scanner based on a striped laser light image. In order to solve the problem of shadowy areas, the proposed 3D scanner has two cameras with one laser light source. By using a horizontal rotation table and a rotational arm rotating about the latitudinal axis, the scanner is able to scan in all directions. To remove an additional optical filter for laser light pixel extraction of an image, we have adopted a differential image method with laser light modulation. Experimental results show that the scanner's 3D data acquisition performance exhibited less than 0.2 mm of measurement error. Therefore, this scanner has proven that it is possible to reconstruct an object's 3D surface from point cloud data using a 3D scanner, enabling reproduction of the object using a commercially available 3D printer.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.766-767
• /
• 2010

최근 주목받고 있는 광원인 LED를 이용하여 국소 환부 부위의 무영 촬영을 위해 의료용 링 라이트를 개발하였다. 개발된 링 라이트는 PWM 방식을 이용하여 다양한 광량의 조절이 가능하도록 설계하였으며 각각의 LED를 독립적으로 제어함으로 색온도 및 연색성의 조절이 가능하다. 또한 환부의 연속 촬영을 위한 지속광과 순간적인 촬영을 위한 플래시 모드의 동작이 가능 하다. 본 연구에서는 환부의 순간적인 무영촬영을 위해 구성된 인터페이스 회로를 이용하여 순간적인 플래시 기능의 응답속도를 확인하였다.

• 한국통신학회논문지
• /
• 제38C권9호
• /
• pp.781-786
• /
• 2013

Multiplexing information over parallel data channels based on RF MIMO concept is possible to achieve considerable data rates over large transmission ranges with just a single transmitting element. Visual multiplexing MIMO techniques will send independent streams of bits using the multiple elements of the light transmitter array and recording over a group of camera pixels can further enhance the data rates. The proposed system is a combination of the reliance on computer vision algorithms for tracking and OOK cell frame modulation. LED array are controlled to transmit message in the form of digital information using ON-OFF signaling with ON-OFF pulses (ON = bit 1, OFF = bit 0). A camera captures image frames of the array which are then individually processed and sequentially decoded to retrieve data. To demodulated data transmission, a motion tracking algorithm is implemented in OpenCV (Open source Computer Vision library) to classify the transmission pattern. One of the most advantages of proposed architecture is Computer Vision (CV) based image analysis techniques which can be used to spatially separate signals and remove interferences from ambient light. It will be the future challenges and opportunities for mobile communication networking research.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.361-366
• /
• 2009

We propose the performance enhancing method optimization of an asynchronous 2.5 Gbps/1.25 Gbps optical subscriber network with inverse RZ (Return to Zero) coded downstream and NRZ (Non Return to Zero) upstream re-modulation by adjusting threshold level control of a receiver. We theoretically analyze the BER (Bit Error Rate) performance by modeling the occurrence of BER by simulation with MATLAB according to the types of downstream data. The results have shown that the normalized threshold level in an optical receiver could be saturated at 1/3 as the SNR (Signal to Noise Ratio) increases. The needed SNR for obtaining the BER $10^{-9}$ can be reduced by $\sim$5 dB by optimizing the normalized threshold level at 1/3 instead of by using the conventional receiver with threshold level of 0.5. The proposed system can be a useful technology for asynchronous optical access networks with asymmetric upstream and downstream data rates, because the improved minimum receiving power could replace a light source with a source with lower power and lower cost in an OLT (Optical Line Termination).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.89-92
• /
• 2001

Silent gas discharge method has been widely applied for ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low-cost power supply for such systems is a task of great impotency. This paper introduces high-frequency inverter type mode power supply designed for ozone generation tube and ultraviolet generation excimer lamp and considerations on this inverter and pulse density modulation control strategy applied in it.

• Journal of Power Electronics
• /
• 제2권3호
• /
• pp.206-211
• /
• 2002

Silent gas discharge method has been widely applied fur ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low - cost power supply for such systems is an important task at present. This paper introduces high-frequency inverter type mode power supply designed fur ozone generation tube and ultraviolet generation excimer lamp and considerations on the design of the inverter and pulse density modulation control strategy applied in it.

• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.30-35
• /
• 1983

태양전지에 변조된 빛을 쏘일 경우 단락전류에 발생하는 위상차가 태양전지의 여러 가지 파라미터에 대하여 계산되었다. 위상차를 실험적으로 측정하여 계산 결과와 비교함으로써 소수 반송자수명이 추정되었다. 본 방법으로 측정된 결과와 비교하기 위하여 일반적으로 사용되어온 개방전압 감쇠방법으로 소수 반송자 수명을 측정하였다.

• 한국통신학회논문지
• /
• 제19권10호
• /
• pp.1957-1964
• /
• 1994

본 논문에서 CW(Continuos Wave) 레이저를 광원으로 사용하고 음향 광 소자(Acousto-Optic Device:AOD)의 공간 적분이론 및 CCD(Change Coupled Device)의 시간 적분이론을 이용하여 실 시간 처리가 가능한 합성 개구면 레이다(Synthetic Aperture Radar;SAR)처리기 시스템을 구현하였다. 제안된 시스템의 장점은 구동회로가 요구되지 않는다. 제안된 SAR 처리기 시스템은 선형 주파수 변조 신호(chirp)를 레이다 신호로 사용하였으며, 단위 표적에 대한 수신 데이타는 1차원 데이타로서 Z 80 보드와 전자회로를 이용하여 제작하였다. 또한 CW레이저를 사용함에 따라 발생되는 chirp 촛점화의 유동(smear)현상을 방지하기 위하여 AOD의 Brag 회절 각도를 이용하여 광원을 펄스화 하였으며, 제작한 chirp 신호는 펄스와 동기를 맞추어 구성하였다. 구성된 SAR 처리기 시스템의 CCD에 검출되는 영상과 데이타를 실험 및 분석한 결과는 단위표적의 거리가 증가함에 따라 탐지효과 감소되었고, chirp 신호 대역폭의 증가에 따라 분해능력이 향상되었으며, 펄스폭의 감소에 따라 유동(smear)현상이 감소하였다. 따라서 본 논문에서 실험결과는 제안된 시스템을 실시간 처리 시스템으로써 사용할 수 있음을 확인하였다.