• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.215-218
• /
• 2013

Vanadium dioxide ($VO_2$) is an attractive material for smart window applications where the transmittance of light can be automatically modulated from a transparent state to an opaque state at the critical temperature of ${\sim}68^{\circ}C$. Meanwhile, F : $SnO_2$ (F-doped $SnO_2$, FTO) glass is a transparent conductive oxide material that is widely used in solar-energy-related applications because of its excellent optical and electrical properties. Relatively high transmittance and low emissivity have been obtained for FTO-coated glasses. Tunable transmittance corresponding to ambient temperature and low emissivity can be expected from $VO_2$ films deposited onto FTO glasses. In this study, FTO glasses were applied for the deposition of $VO_2$ thin films by pulsed DC magnetron sputtering. $VO_2$ thin films were also deposited on a Pyrex substrate for comparison. To decrease the phase transition temperature of $VO_2$, tungsten-doped $VO_2$ films were also deposited onto FTO glasses. The visible transmittance of $VO_2$/FTO was higher than that of $VO_2$/pyrex due to the increased crystallinity of the $VO_2$ thin film deposited on FTO and decreased interface reflection. Although the solar transmittance modulation of $VO_2$/FTO was lower than that of $VO_2$/pyrex, room temperature solar transmittance of $VO_2$/FTO was lower than that of $VO_2$/pyrex, which is advantageous for reflecting solar heat energy in summer.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.177-192
• /
• 1995

The purpos대 f this research was to figure out clothing imagery underlying Shakepeare's King Lear and transfer it into actual stage costume. Three steps were taken in order to achieve the purpose . The first step exemined theoretical background of the Shakepeare's imagery. The second step reviewed a wide spectum of stage costume used in the last four centuries. The final step was to design and produced actual stage costume focusing on Lear, while considering clothing imagery drawn from the previous steps. King Lear contained rich clothing imagery which could contrast the relationship between material and spirit. In particular, it shed light on the contrast between Lear's divesting and Edgar's wearing and denoted that wearing and divesting processes were closely related to spiritual and status changes. A review of stage costume used for four centuries was prepared in order to understand how clothing imagery was applied in producing stage costume. It was found that their stage costume was reflecting clothing imagery captured from the analysis of king Lear. On the basis of this review, this research presented Lear's stage costume which applied clothing imagery drawn from King Lear. In producing stage costume , actual stage costume used Elizabethan fashion as its basic color and pattern. It also utilized modern clothing production techniques and ornaments acceptable in these days. As Lear was depicted as a character who underwent spiritual and status changes in the process of divesting , his costume was produced in line with this clothing imagery (i.e., divesting). The long journey of reviewing and analyzing King Lear from a stand point of clothing reassured us, on the one hand, the importance of stage costume. On the other hand, it established the groundwork for developing the methodology of fashion design by applying clothing imagery drawn from literature to design and production of stage costume.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.4
• /
• pp.200-208
• /
• 1989

To the purpose of preparation for investigating aspect of material that not revealed by the light microscope and extending our knowledge in applicable field, a scanning acoustic microscope system of 200MHz was organized and appraised its performance with experiments. Professor N.CHUBACHI in Tohoku University in Sendai, Japan provided the ZnO transducer with lens. The system for transmitting and receiving ultrasonic pulses of 200nsec was organized with a rectangular audio wave generator for modulation of 200MHz carrier wave, gating system for transmitting and receiving, mixer for converting intermediate frequency, a directional coupler, ZnO transducer, radio frequency amplifiers. detecter and personal computer. The Scanning system was driven in micro steps with three stepping motors in the direction of x, y and z axes. The system was a reflecting type scanning acoustic microscope and the operation program processed graphics data from receiving echo intensities. Photograph of fish scale obtained by optical microscope was compared with its image by the scanning acoustic microscope organized here. The result was satisfiable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.411-416
• /
• 2020

An optical arrangement has been set inside a photo-spectrometer to measure the reflectance of IR optics materials in mid IR range. The optical arrangement consists of equally spaced 4 gold coated full reflecting mirrors with the incidence angle of 45°. Baseline beam intensity I_B has been measured while the beam proceeds through the 4 mirrors. Reflectance of a mirror has been estimated from the I_B. And the beam intensity I_S with the specimen in the optical path has been measured with the 4th mirror replaced with the specimen. Reflectance of the specimen has been estimated from the value of I_S/I_B. Then the estimated reflectance has been put in Fresnel equation relating reflectance and refractive index(RI) to estimate the RI of the material. Measurement has been made for sapphire, germanium, magnesium fluoride, and zinc sulfide. The estimated RI of the materials are closely matching with reference data and the maximum difference less than 2% over the wavelength range 3-5㎛ for all materials tested. As an FT-IR photo-spectrometer with a broadband wavelength infrared light source is used, this method has the advantage of measuring the refractive index at multiple wavelengths in a single measurement.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2023

This study reveals the absence of standard design guidelines by region through investigation and analysis centered on public design cases by region in Jeollabuk-do and design elements that can reflect the integration, identity, and diversity of public design in each region by five regions. Through this, the following conclusions could be obtained. First, to improve the quality of street facilities in Jeollabuk-do, the design elements (design motif, color, pattern) applicable to the standard design were analyzed by dividing them into five regions. As a design motif, it was possible to extract patterns containing straight lines, sophistication, dignity, and smartness. In the Northeast region, it is comfortable with the motif of the mountain ridge reflecting geographical characteristics, and it can be extracted elements that contain warm and natural colors. In the southeastern region, patterns that reflect design elements were extracted by applying safe, lively, and peaceful colors with the design motif of curves that blend nature and agriculture. In the southwestern region, design pattern elements that highlight nature, history, and culture were extracted with various cultural assets and natural greenery as motifs. Lastly, in the Saemangeum region, the ocean flow and greenery could be used as a design motif to reflect a positive, clear, future-oriented image in the design spot zones by region. Second, based on the standard design elements (design motive, color, pattern) by region extracted for the standard design development of street facilities in each region in Jeollabuk-do, an integrated zone(Form, structure, material, color, functional element) to which regional design guidelines can be applied. Third, an integrated zone (form, structure, material, color, functional elements) was composed. In addition, design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region were designated. By designating design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region, standard design development plans (integrated pillars, jaywalking prevention fences, roundabouts (urban type, rural type), street trees) Eight standard designs, including protective covers, street planters, flat benches, light benches, visual media for user guidance, and parking zones for personal mobile devices) were presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.82.2-82.2
• /
• 2013

The NISS (Near-infrared Imaging Spectrometer for Star formation history) onboard NEXTSat-1 is being developed by KASI. The NISS will perform the imaging low-resolution spectroscopic observation in the near-infrared range for nearby galaxies, low background regions, starforming regions and so on. The off-axis reflecting telescope with a wide field of view (2 deg. ${\times}$ 2 deg.) will be operated in the wavelength range from 0.95 to $3.8{\mu}m$. In order to reduce thermal noise, a telescope and a HgCdTe infrared sensor will be cooled down to 200K and 80K, respectively. To evade a stray light outside a field of view and use limited space efficiently, the NISS adopted the off-axis reflective optical system. The primary and secondary mirrors, optomechanical part and mechanical structure were designed to use the same material. It will lessen the degradation of optical performance due to a thermal variation. The purpose of NISS is the observation of cosmic near-infrared background in the wide wavelength range as well as the detection of near-infrared spectral lines in nearby galaxies, cluster of galaxies and star forming regions. It will give us less biased information on the star formation history. In addition, we will demonstrate the space technologies related to the development of the Korea's leading near-infrared instrument for the future large infrared telescope, SPICA.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.142-156
• /
• 2011

This study aims to suggest improvements in night landscape lighting of Bomun Lake, a representative waterfront landscape in Gyeongju which is the city designated as UNESCO World Heritage in December 2000. This study divided the area into three types of sections-that is, road section, walking section, and landscape section- based on the present condition of land use and users of the Bomun Lake area. In addition, this study classified the lightingtypes by section into nine lighting types-that is, road, crossroad, parking lot, pedestrian passage, trail, sculpture, tree, waterfront deck-by comparing them to the park lighting types suggested by the KS A illuminance standards, and examined the problems of the current Bomun Lake lighting base on the standards. By using this as basic data, this study established relevant plans and collected research material. This study suggested directions of each of the three sections and improvements in illuminance, color temperature, creating methods of each of the nine lighting types to the night Lighting planning of the Bomun Lake area reflecting the landscape characteristics of Gyeongju, a historical, cultural city.