• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1347-1348
• /
• 2008

The efficacy and its degradation of light emitting diode(LED) are related to its PN junction's temperature(Tj). Currently efficacy in certain temperature and thermo-resistant are defined for the depending. However, the definitions are quite inconvenient for lighting application. The paper focuses on the issue and presents a method to evaluate the thermal characteristics of LED efficay.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.779-780
• /
• 2009

New inverted architecture of a hybrid inorganic-organic light-emitting diode, utilizing ZrO2 electron-injecting layer, is presented. The thickness of the ZrO2, as well as the annealing of the light-emitting polymer, is found critical to obtain good performance. A range of light-emitting polymers is shown to operate efficiently in the proposed architecture.

• 한국수산과학회지
• /
• 제46권5호
• /
• pp.571-574
• /
• 2013

To determine an efficient growth system for algal cultivation and to develop adequate culture system utilizing LED light, we investigated the effects of fluorescent and light emitting diode (LED) light source on the growth of Ulva pertusa. U. pertusa was cultured at $17^{\circ}C$ under a light intensity of 35 ${\mu}mol$ photons $m^{-2}s^{-1}$ and a 10L:14D photoperiod using either fluorescent or LED lamps. After 1 week of incubation under the same environmental condition, the length and width of Ulva pertusa grown under LED light were 1.5- and 1.9-fold greater, respectively, than the length and width of algae grown under fluorescent light. After two weeks, length and width were 2.6- and 2.0-fold greater, respectively, in algae grown under LED light. Total length and width of Ulva pertusa after three weeks of incubation were 1.7- and 1.2-fold greater in algae grown under LED light than those grown under fluorescent light. Therefore, the LED light induced significantly higher growth of Ulva pertusa than fluorescent light.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1956-1960
• /
• 1991

This paper describes the measured results upon monochromatic light, compound light, and light emanated from light emitting diodes by a simplified wavemeter with a semiconductor color sensor. Since a single unit element of a semiconductor color sensor with two PN junction photodiodes has been developed, the author has fabricated the simplified wave detector by using the element. The simplified wive detector has been measured results upon monochromatic light, compound light, and light emanated from light emitting diodes. Since luminescent color of each diode locates in luminosity region, comparison of measured values of PD-150 and PD-151 resulted no remarkable difference in averaged wave length. As for monochromatic light, PD-151 showed very cross value to the color filter peak value rather than PD-150. As for compound light, PD-150 has shown such influence of long wave length light which reaches to near infrared ray with respect to PD-151.

• Medical Lasers
• /
• 제8권2호
• /
• pp.94-96
• /
• 2019

Burns are one of the most extensive injuries of soft tissues as well as skin, occasionally resulting in extensive, deep wounds and death. Burn wounds can lead to severe physical and psychological distress because of excessive scarring and skin contractures. Treatment of burn wounds has always been a challenging problem and many different methods have been used to treat such injuries. We report here on treating a patient with a burn wound using 830-nm light emitting diode (LED) phototherapy combined with epidermal growth factor (EGF) solution. After five daily sessions of LED with EGF solution treatment, the patient demonstrated nearly complete improvement with no remarkable side effects. We suggest that LED phototherapy combined with EGF solution could be an effective and safe treatment option for treating burn wounds.

• Journal of Applied Biological Chemistry
• /
• 제57권3호
• /
• pp.255-257
• /
• 2014

배추좀나방에 대한 light emitting diode (LED) 트랩의 시설재배지내 이용가능성을 평가하기 위해 LED 트랩의 유인활성을 광원이 장착되지 않은 no light 트랩과 상업적 대조구인 black-light 트랩과 비교하였다. 그 결과 green LED 트랩에서 가장 높은 유인활성을 나타내었으며, 상업적 대조구로 사용된 black-light의 경우 광원이 설치되지 않은 no light와 비교하여 유인활성을 나타내었으나 green LED 보다 낮은 활성을 나타내었다. 이러한 결과를 바탕으로 green LED 트랩이 시설재배지내에서 친환경적 해충방제법으로의 가능성을 보여주었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.762-765
• /
• 2002

The bilayer organic light-emitting diode using Al (DBM) $_3$ (DBM=Dibenzoylmethane) as an emitting material and poly (N-vinylcarbazole) (PVK) as hole-transport material, emitted bright blue-green light instead of blue light. The blue-green emission is attributed to exciplex formation at the solid interface between Al (DBM) $_3$ and the hole-transport material. The exciplex formation was evidenced by the measurement of the photoluminescence spectra and lifetimes of Al (DBM) $_3$, PVK and an equimolar amount of mixture of Al (DBM) $_3$ and PVK.

• 한국위성정보통신학회논문지
• /
• 제8권1호
• /
• pp.71-76
• /
• 2013

본 논문에서는 LED(Light Emitting Diode)의 White 조명을 이용한 VLC(Visible Light Communication) 송 수신기를 구현하였다. LED의 송신파형과 PD의 수신파형을 VLC 데이터를 복원하기 위하여 분석하였다. 가시광 무선 통신 시스템의 가능성을 보이기 위해서 오디오 신호를 성공적으로 전송하였고, 아두이노, 랩뷰, RS232 직렬 포트를 사용하여 이미지 데이터를 송수신 하는 시스템을 만들었다. 다양한 모듈레이션 기법들의 성능을 다양한 채널 조건에서 평가와 비교를 해 보았다.

• 대한환경공학회지
• /
• 제34권9호
• /
• pp.630-636
• /
• 2012

본 연구는 해양미세조류 Dunaliella salina을 LED 광원을 이용하여 배양한 연구로 배양에 필요한 최적의 파장, 광도, 공기공급속도 및 배양온도를 찾기 위하여 수행되었다. 낮은 배양온도에서보다는 높은 온도에서 성장이 빨랐으나, 본 실험에서는 $22^{\circ}C$에서 가장 잘 성장하는 것으로 확인되었다. LED 파장에 따른 성장실험에서는 백색 LED가 배양에 가장 효과적이었으며, 광도에 따른 실험에서는 실험 시 고려한 3가지 광도 중(3,000, 6,300, 8,000 Lux) 3,000 Lux에서 최대 세포농도인 1.30 g/L를 나타내었다. 공기공급속도의 증가는 Dunaliella salina의 성장속도와 반비례의 관계를 나타내었는데, 공기를 공급하지 않은 경우의 비증식속도 $1.12day^{-1}$와 비교하면 공기공급은 본 미세조류의 성장에 저해요인으로 작용함을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1148-1151
• /
• 2009

A self-designed, written in labview, Organic Light-Emitting Diode junction temperature measuring program was used to calculate the internal junction temperature for devices during operation, and an infrared thermometer was used to measure the backside temperature of the device substrate, to discuss the effects of the junction and substrate temperature difference to the characteristics of the device.