• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.133-137
• /
• 2003

When a light is projected upon a material, part of its radiation energy is absorbed and the rest is reflected or transmitted according to the nature of the material. The molecules of the substance absorbing a light obtains the radiation energy to the wavelength of the light to make photochemical degradation by ultraviolet ray or thermal reactions like physical damage by infrared ray. The degree of damage by radiation energy varies to the substances of materials, the spectral power distribution of the light source and the duration of irradiation. Because the damage brings about a devaluation of material and once damaged, it is irretrievable, it is necessary to minimize the damage and conserve the native quality of a material by a protective lighting system. A measuring system was set up to measure the temperature rise of each sample by infrared radiation from light sources. And the temperature rise and temperature distribution by various infrared lamps were measured with varying time.

• Ocean and Polar Research
• /
• v.39 no.2
• /
• pp.107-114
• /
• 2017

In this study, we investigated the effects of light spectra on physiology stress and DNA damage in juvenile rock bream (Oplegnathus fasciatus) using light-emitting diodes (LEDs; green, 520 nm; red, 630 nm) at two intensities (0.25 and $0.5W/m^2$ ) with application of thermal stress (25 and $30^{\circ}C$). We measured the mRNA expression of heat shock protein 70 (HSP70) and the levels of plasma cortisol, glucose, aspartate aminotransferase (AspAT), and alanine aminotransferase (AlaAT). Additionally, DNA damage was measured using comet assays. Our findings showed that HSP70 mRNA expression and plasma cortisol, glucose, AspAT, and AlaAT levels were significantly higher after exposure to high temperatures and were significantly lower after exposure to green LED light. Thus, although high water temperatures induced stress in juvenile rock bream, green LED light inhibited stress. In particular, green LED light reduced stress and DNA damage to a greater degree than other light sources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.786-799
• /
• 2021

Road damage detection is important for road maintenance. With the development of deep learning, more and more road damage detection methods have been proposed, such as Fast R-CNN, Faster R-CNN, Mask R-CNN and RetinaNet. However, because shallow and deep layers cannot be extracted at the same time, the existing methods do not perform well in detecting objects with fewer samples. In addition, these methods cannot obtain a highly accurate detecting bounding box. This paper presents a Multi-level Feature Pyramids method based on M2det. Because the feature layer has multi-scale and multi-level architecture, the feature layer containing more information and obvious features can be extracted. Moreover, an attention mechanism is used to improve the accuracy of local boundary boxes in the dataset. Experimental results show that the proposed method is better than the current state-of-the-art methods.

• Korean Journal of Microbiology
• /
• v.6 no.4
• /
• pp.122-130
• /
• 1968

Action of various wavelengths of visible light on ultraviolet-radiation damage to haploid yeast cells, Saccharomyces cerevisiae 23971, was studied. The results were obtained on the basis of the survival and respiration rates by pre- and post-illuminations of various wavelengths before and after U.V.-irradiations on the yeast cells. Among the wavelengths tested, 635 $m{\mu}$, 429 $m{\mu}$ and white light which caused increase of respiration in pre-treatment alone, induced less resistance to the U. V.-damage than in the control, in both pre- and U.V.-treatment. On the contrary, such wavelengths as 574 $m{\mu}$and 530 $m{\mu}$, showing a weak effect on respiration in pre-treatment increased the susceptability to U.V.-radiation. Photoinactivation was generally obtained by both pre- and post- illuminations along with U.V.-treatment. At 635 $m{\mu}$ the PI rate was the lowest and also a low PI rate was shown at 429 $m{\mu}$. But 429 $m{\mu}$, in the post-treatment of the yeast cells pre-treated by the white light and the darkness respectively, showed the highest PI rate. In both pre- and post- treatment of 574, 530 and 473 $m{\mu}$,the PI rates were high to the same degree. Post-treatments of the wavelengths on U.V.-treated yeasts incubated rather under the white light than the darkness induced lower PI rate. It is assumed that there are great differences in action even of the same wavelength, depending upon the various combination of pre- and post-treatments, and that, moreover, the action of various wavelengths of visible light on U.V.-damage on the cells are concerned with the doses and dose rates of U.V. and visible lights. These observations led to an interpretation that each wavelength of visible light might exert distinctively different effects oil U. V.-damage, mainly causing the inhibition or stimulation of enzymes in the yeast cells.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.89-92
• /
• 1995

For the development of lilght weight cement concrete with high durability, this study used perlite and paper sludge ash by the light weight material, and polypropylene fiber by the reinforcment, and poly-acrylic ester emulsion by the matrix improvement. According to the increasing mixture ratio of fiber and use of polymer, the light weight polypropylene fiber reinforced polymer cement ratio of fiber and use of polymer, the light weight polypropylene fiber reinforced polymer cement concrete were showed high resistance for frost damage.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.430-432
• /
• 2002

The changes in expression of copper-zinc superoxide dismutase (CuZn-SOD), manganese superoxide dismutase (Mn-SOD) and glutathione peroxidase (GPX) in light-damaged rat retinas were examined. Sprague-Dawley rats (male, 6-weeks-old) were maintained on a cyclic photoperiod (12 hours light and 12 hours darkness) for 2 weeks. The illumination intensity during the light period was 80 lux. To induce light damage to the retina, a high-intensity illumination (3000-lux) was applied to the animals for 24 hours. After light exposure, the animals were returned to cyclic lighting. Eyes were enucleated 12 and 24 hours after light exposure started or 1,3, and 7 days after light exposure ended. Eyes were fixed and embedded in paraffin wax. Tissues were cut into 4${\mu}{\textrm}{m}$-thick sections. Sections were immunostained using antibody against CuZn-SOD, Mn-SOD, GPX and 8-hydroxy-deoxyguanocine (8-OHdG) as oxidative stress marker. 8-OHdG was observed in the outer nuclear layer (ONL) and retinal pigment epithelium (RPE) during light exposure. In light-damaged retinas CuZn-SOD labeling was up regulated in the ONL and RPE. Mn-SOD labeling was up regulated in rod inner segments (RIS) during light exposure and that in the RPE was up regulated after exposure. GPX labeling was observed in rod outer segments (ROS) during light exposure. GPX labeling was also observed in the RPE during and after light exposure. All three enzymes were observed in the outer retina, which suffered light damage, but occurred in defferent layers except within the RPE, in which case all three were expressed. These enzymes may play complementary roles as protective factors in light-damaged retinas.

• Journal of Photoscience
• /
• v.5 no.4
• /
• pp.157-162
• /
• 1998

The effect of heat treatment in the light on the subsequent CO2 fixation was studied with isolated spinach chloroplasts to define the role of light during heat stress. The degree of inhibition in CO2 fixation after heat treatment at 35$^{\circ}C$ under full light intensity (600W/$m^2$) was same as that in the dark. However, heat treatment of isolated chloroplasts in the light manifested thylakoidal damage, which did not occur in the dark. Under weak light (10~30 W/$m^2$ ) where no thylakoidal damage occurred, the inhibition was substantially alleviated , showing protective effect of light . The inhibition caused by heat treatment in the dark or light is prevented by the addition of a few combined compounds to the medium prior to treatment. Fructose-1-6- bisphosphate(with aldolase)and ribose-5-phosphate, known to be effective combined with oxaloacetate in preventing inhibition after heat treatment in the dark were equally effective in the light even without oxaloacetate. Addition of sugar phosphate reduced the Mehler reaction, which may occur in fast rae under high light. However, the addition of bicarbnate and catalase that would remove Mehler reaction did not provide any protection, indicating that protective role of sugar phosphate is elsewhere. Furghermore, in whole plants rapid recovery from heat stress was observed in the light. The apparently lesser or equal inhibition in spite of additional thylakoidal damage under heat stres in the light and less requirement for the protection against heat treatment suggest that the inhibitory effect of heat stress is alleviated by light treatment.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.483-494
• /
• 2009

Damage detection has been proven to be a challenging task in structural health monitoring (SHM) due to the fact that damage cannot be measured. The difficulty associated with damage detection is related to electing a feature that is sensitive to damage occurrence and evolution. This difficulty increases as the damage size decreases limiting the ability to detect damage occurrence at the micron and submicron length scale. Damage detection at this length scale is of interest for sensitive structures such as aircrafts and nuclear facilities. In this paper a new photonic sensor based on photonic crystal (PhC) technology that can be synthesized at the nanoscale is introduced. PhCs are synthetic materials that are capable of controlling light propagation by creating a photonic bandgap where light is forbidden to propagate. The interesting feature of PhC is that its photonic signature is strongly tied to its microstructure periodicity. This study demonstrates that when a PhC sensor adhered to polymer substrate experiences micron or submicron damage, it will experience changes in its microstructural periodicity thereby creating a photonic signature that can be related to damage severity. This concept is validated here using a three-dimensional integrated numerical simulation.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.106-113
• /
• 2023

Plant extracts have been studied due to their potential as photoprotective agents against UV and blue light exposure. Previous studies have revealed that several plant extracts have photoprotection capacities and synergistic effects with synthetic products. However, such results for pu'er tea and Curcuma longa L. have not been reported yet for a cosmetic formulation. Thus, the objective of this study was to evaluate photoprotection capacities of pu'er tea and C. longa L. extracts for a sunscreen compound. The pu'er tea extract improved sun protection factor value of 2-ethyl-hexyl methoxycinnamate (a synthetic sunscreen compound) by 46% and showed a high antioxidant capability that could help skin recover from photo-induced damage. C. longa L. extract also showed a potential to protect skin from blue light-induced damage because it not only had a maximum absorption peak at the blue light range, but also protected human fibroblasts from blue light-induced damage. The addition of both extracts shifted the critical wavelength of 2-ethyl-hexyl methoxycinnamate from 350 nm to 386 nm, giving it a broad-spectrum feature. Thus, pu'er tea and C. longa L. extracts may enhance the photoprotection ability of synthetic sunscreen products.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.211-216
• /
• 2001

It is well known that composite laminates are easily damaged by low velocity impact. Low velocity impact damage characteristics and residual compressive strength of composite laminates used in light rail transit are investigated. The damage of composite laminates subjected to impact loading are occurred matrix cracking, delamination, and fiber breakage. The damage of matrix cracking and delamination are reduced suddenly the compressive strength after impact. The objectives of this study is to evaluate impact characteristics and the relationship between impact force and inside damage of composite laminates by low velocity impact loading. UT C-scan is used to determine impact damage areas by impact loading.