• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.319-320
• /
• 2006

In this paper, automatic sunvisor system is introduced for driver's safety and convenience. This system has the mechanism which keeps the sun off without obstruction of driver's sight. The mechanism can make the sunvisor move forward or rotate left while remaining inside inner roof. The control system consists of a CPU, a motor driver, light sensors, and the algorithm that can control the movement of sunvisor efficiently. When the light sensors take the sun light, they give the signal to the CPU and the CPU calculates the best position of the sunvisor with the information of driver's eyes height. Then, the CPU gives the signal to motors that can move the sunvisor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.49-53
• /
• 2004

This study was aimed to promote evergreen ferns native to Korea as a material for interior landscape by investigate effects of light quality on the growth of Cyrtomium falcatum and Rumohra aristata, in an indoor environment that artificial light was used, especially. Result of experiments are as follows; 1. Wavelengths were measured as control(=570~580nm), red(=600~610nm), yellow(=550~580nm), green(=500~510nm) and blue(=430~440nm) between different color film. The order of photon flux density was red>yellow>control>green>blue decreased. 2. Although there was no difference in the growth of Cyrtomium falcatum depending on light quality, in case of fronds with sori and new fronds, there were highest under red film. Fresh weight was no significant in all treatments, but dry weight was increased with green>control>yellow>blue>red in order. 3. In case of Rumohra aristata, there was no difference in its growth, however, number of total fronds was highest under green film. Although fresh weight was increased with yellow film, dry weight was highest under green film.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1502-1519
• /
• 2020

Recently, new devices have been developed for the Internet of Things concept. The devices commonly use RF (Radio Frequency) based wireless communication. With the increase in the number of devices, the space allocated for the radio frequency band in wireless communication fills rapidly. Visible Light Communication (VLC) is an alternative, secure and economical communication technology that uses light instead of radio frequencies. While Web of Things (WoT) is the adaptation of the experience and knowledge acquired from the web into the internet of things ecosystems. By combining these two technologies, the development of the Visible Light Communication for Web of Things (VLC4WoT) system, which can use VLC and WoT technologies, has been our motivation. In our study, microcontroller control circuit was created for VLC4WoT system. Control of the circuits over the internet was performed. VLC based receiver and transmitter units have been developed for wireless communication. Web based interface was created for control. The test apparatus consisting of four objects with four outputs and a transfer unit was carried out. In this test, communication was achieved successfully. It was presented in the study that VLC can be used in the web of things architecture. In the future, it is envisaged to use this system as a safe and economical system in indoor environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1956-1960
• /
• 1991

This paper describes the measured results upon monochromatic light, compound light, and light emanated from light emitting diodes by a simplified wavemeter with a semiconductor color sensor. Since a single unit element of a semiconductor color sensor with two PN junction photodiodes has been developed, the author has fabricated the simplified wave detector by using the element. The simplified wive detector has been measured results upon monochromatic light, compound light, and light emanated from light emitting diodes. Since luminescent color of each diode locates in luminosity region, comparison of measured values of PD-150 and PD-151 resulted no remarkable difference in averaged wave length. As for monochromatic light, PD-151 showed very cross value to the color filter peak value rather than PD-150. As for compound light, PD-150 has shown such influence of long wave length light which reaches to near infrared ray with respect to PD-151.

• KIEAE Journal
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2010

Spill light by street lighting is a kind of light pollution creating cozy night atmosphere, interfere visual private and cause insomnia at night. This study was to survey light trespass of the windows in residential buildings. According to outdoor lighting control guidance in Seoul, three different areas were selected to investigate the trespass light to windows. The results were as follows: 37% of the buildings of 386 buildings were influenced by street lighting, and 47% of windows were occurred light trespass. Therefore, the street lighting affected light trespass at night in survey area. The main reasons of light trespass were luminaire type, luminaire pole height, and street width. For protecting the light trespass to windows, it is necessary to non-cutoff fixture to full cutoff fixture by the street width.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.49-54
• /
• 2002

Solar daylighting system provides free and comfort lighting, but its cost has been key issue due to difficult design and control of the heavy light collecting system. One of the solutions for the heavy design issues would be using a light framed film such fresnel and prism lens. Prism light guide luminaires have for some time been used to distribute light when it is desirable to have remote light sources. These systems are helpful when it is desirable to have fewer light sources, and/or to position light sources in places where lamp maintenance is easier, or electrical hazard is reduced. This proposed prototype system consists of light collector, light transformer and light pipe.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04b
• /
• pp.10-11
• /
• 2008

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for bone marrow cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of bone marrow cells was verified in irradiation group as compared to non-irradiation group.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1511-1514
• /
• 2009

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.317-321
• /
• 2006

The investigation of the formation of organic sulfur compounds (i.e., odor species), mainly methyl mercaptan and demethyl suifide, during kraft pulping has been conducted, in which both hardwood and softwood species were used. It was discovered that there is an organic sulfur compounds formation phase transition point with respect to delignification extent. The transition point occurs at a kappa number of approximately 35 and 20 for softwoods and hardwoods, respectively. The results also showed that both low sulfidity and anthraquinone (AQ) addition are helpful to control the formation of theses organic sulfur compounds during kraft pulping. Whereas Hexenuronic acid (HexA) has contribution to Kappa number, the extended delignification not only lead to low pulp yield, but also be adverse to odor control. A significant in-digester odor reduction can be achieved if the pulping is to be terminated before phase transition point and combined with AQ addition.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.66-74
• /
• 2014

In this paper, the performance of Hybrid Dimming control system for Daylighting system is evaluated by accredited tests. The system controls the balance of illuminance of daylight between daylight system and LED light system. It makes the normal illuminance of interior without the effects of weather by controlling the LED depending on the brightness of outside. For the tests, 6 diffusers($600{\times}300mm$) were installed in lighting area($36m^2$) and normal operation of the system sensors were tested about the interference of sunlight. The results of the examinations were satisfied with the criteria of accredited tests. Further research is the verification of energy saving effect by comparing the Hybrid Dimming control system to current artificial light system.