• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.118.3-118
• /
• 2001

CLED (Contact Light Emitting Device) has three layers consisting of a transparent electrode, a light emitting layer and a substrate. When the substrate of the CLED comes in contact with a fingerprint under AC input voltage, it makes an electric field between the fingerprint and the device. Due to the electric field, the light is emitted along the ridgeline of the fingerprint. The intensity along the ridge on the surface of the CLED increase in proportion to the electric field. To achieve uniform performance of fingerprint verification devices, inspection system of CLED for quality control were required. In this research, we proposed the factors for quality controls such as dimensions of the CLED, uniformity ...

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.18-24
• /
• 2010

In this paper, we address an active ranging system based on laser structured light image for mobile robot application. Since the burdensome correspondence problem is avoidable, the structured light image processing has efficient computation in comparison with the conventional stereo image processing. By using a cylindrical lens in the laser generation, it is possible to convert a point laser into a stripe laser without motorized scan in the proposed system. In order to achieve robustness against environmental illumination noise, we propose an efficient integro-differential image processing algorithm. The proposed system has embedded image processing module and transmits distance data to reduce the computational burden in main control system.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.76-79
• /
• 2015

Visible light communication (VLC) is a short range optical communication technology using light emitting diodes. In this paper, we implement variable pulse position modulation (VPPM) defined in the IEEE 802.15.7 standard with a Cortex-M processor, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The synchronization procedure between the transmitter and receiver is not defined clearly in the VPPM standard. In order to synchronize the transmitter and receiver easily, two overhead bits are used including one start bit and one stop bit modulated by on-off keying (OOK). Experimental results under various environmental conditions show that the proposed VPPM can support a seamless 100 Kbps data rate with 10 levels in the dimming control.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권2호
• /
• pp.99-106
• /
• 2004

Train control system in LRT (Light Rail Transit) is developed as a part of "Light Rail Transit System Development Project". But there was no specific requirement representing the system safety. Because system safety must be ensured before the customization, we applied the system to a officially recognized specific procedure, such as "A Guideline to Ensure the Safety of Train Control System in Korea" that was officially announced by KNR (Korea National Railroad) in 2001. We should draw system safely requirement to guarantee system safety for the first time. In this paper, the hazard identification and analysis to derive the safety requirement on LRT train control system are carried out following the KNR guideline. To analyze hazard, we have to deduce system functions, identify related hazards, derive the effects of the hazards, analyze current risk, define the target risk of the system, and deduce the alternative plans to reduce the effects of the hazards. After the hazard analysis following the upper procedure, 30 hazards are identified and analysed. Especially detailed analysis on train collision that is a main hazard of the train control of system is specially carried out.

• Journal of Ginseng Research
• /
• 제36권2호
• /
• pp.198-204
• /
• 2012

An light-emitting diode (LED)-based light source was used as a monochromatic light source to determine the responses of raw ginseng roots (Panax ginseng Meyer) to specific emission spectra with respect to the production of ginsenosides. The ginsenoside content in the ginseng roots changed in response to the LED light treatments at $25^{\circ}C$ relative to the levels in the control roots that were treated in the dark or at $4^{\circ}C$ for 7 d. Ginseng roots were exposed to LEDs with four different peak emission wavelengths, 380, 450, 470, and 660 nm, in closed compartments. Compared with the control $4^{\circ}C$-treated roots, roots that were treated with 450 and 470 nm light showed a significantly increased production of ginsenosides (p<0.05), with increases of 64.9% and 74.1%, respectively. The contents of the ginsenosides $Rb_2$, Rc, and $Rg_1$ were significantly higher (p<0.05) in the 450 and 470 nm-treated root samples. The ratio of protopanaxadiol ginsenosides ($Rb_1$, $Rb_2$, Rc, and Rd) to protopanaxatriol ginsenosides ($Rb_1$, $Rb_2$, Re, and Rf) was significantly higher (p<0.05) in the 450 and 470 nm-treated root samples than in the control $4^{\circ}C$-treated roots. This is the first report that demonstrates the increase and conversion of ginsenosides in raw ginseng roots in response to exposure to LED light.

• 한국환경농학회지
• /
• 제42권1호
• /
• pp.14-20
• /
• 2023

Light is an important factor that influences the growth and development of flowering plants. The present study investigated the effects of in vitro acclimatization to different light colors (white light (WL; control), blue light (BL; 447 nm), green light (GL; 519 nm), and red light (RL; 667 nm)) on the growth of petunia (Petunia hybrida) and of hardening cultivation of plant transferred form in vitro to a greenhouse under sunlight. Compared to the control, the shoot length and leaf width of Petunia increased by 42% and 11.7%, respectively, after acclimatization to BL and the shoot growth increased by 29.3% after acclimatization to RL. The chlorophyll and carotenoid contents after acclimatization to BL and GL were 16.7% and 11.3% higher, respectively, and 14.4% and 11.9% higher, respectively, than those in the control. During greenhouse cultivation, the shoot length increased by 16.7% and 11.3%, respectively, after acclimatization to BL and RL, respectively, and the leaf length and leaf width increased by 14.4% and 11.9%, respectively, after acclimatization to GL. While dry weight of root of GL and BL was not significant difference in vitro, increased by 59.0% and 22.9% ex vitro than that of WL. Thus, acclimatization to BL increased the shoot growth and leaf chlorophyll contents, and acclimatization to GL and RL enhanced shoot and root growth, in petunia.

• 한국ITS학회 논문지
• /
• 제12권1호
• /
• pp.109-120
• /
• 2013

본 논문에서는 태양광 발전을 이용한 하이브리드 도로조명 제어 시스템 설계를 제안한다. 제안하는 하이브리드 도로조명 점등제어 시스템은 태양광 발전을 이용하여 하이브리드 컨트롤러를 통해 전원을 공급하고 도로조명을 점등제어가 가능하도록 설계한다. 전력 부족시 상시전력을 공급하도록 제어하고 인체 감지시 자동 조명 제어가 되도록 게이트웨이는 도로조명에 zigbee를 이용하여 제어명령을 전송한다. 미리 설정해 놓은 타임 스케줄에 의해 시스템의 상태를 결정하고 동작시키는 점등제어 알고리즘을 적용한다. 본 논문에서 제안하는 하이브리드 도로조명 점등제어 시스템의 효율성 분석결과, 등주 당 하루에 129.6W의 전력소비를 하였고 1개월간 3.8KW, 연간 47.3KW를 소비하였다. 결과적으로 기존의 점등제어 시스템보다 76.2%의 전력소비량 감소와 76.8%의 전력요금이 감소되어 에너지 효율을 높일 수 있었다.

• International journal of advanced smart convergence
• /
• 제5권3호
• /
• pp.66-71
• /
• 2016

Smart building gate security control system using smartphone integrated with near field communication (NFC) has become part of daily life usage these days. The technology change in replacing RF NFC device using visible light communication technology based approach growing faster in recent days. This paper propose a design and development of gate security control system using color code based user authentication ID generation as part of an intelligent access control system to control automatic door open and close. In this approach gate security access control use the recent visible light communication technology trends to transfer the user specific authentication code to door access control system using color code on smartphone screen. Using a camera in the door access control system (ACS), color codes on smartphone screens are detected and matched to the database of authenticated user to open the door automatically in gate security system. We measure the visual light communication technology efficiency as a part of the research and the experiments have revealed that more than 95% users authenticated correctly at the suggested experiment environment on gate security control system.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1005-1013
• /
• 2008

This paper describes a new sensor system for 3D range measurement using the structured infrared light. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and the projected infrared light are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Identification of the cells from the pattern is the key issue in the proposed method. Several methods of correctly identifying the cells are discussed and verified with experiments.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.371-381
• /
• 2021

A machine vision inspection system consists of a camera, optics, illumination, and image acquisition system. Especially a scanning system has to be made to measure a large inspection area. Therefore, a machine vision line scan camera needs a line scan light source. A line scan light source should have a high light intensity and a uniform intensity distribution. In this paper, an offset calibration and slope calibration methods are introduced to obtain a uniform light intensity profile. Offset calibration method is to remove the deviation of light intensity among channels through adding intensity difference. Slope calibration is to remove variation of light intensity slope according to the control step among channels through multiplying slope difference. We can obtain an improved light intensity profile through applying offset and slope calibration simultaneously. The proposed method can help to obtain clearer image with a high precision in a machine vision inspection system.