• 한국토양비료학회지
• /
• 제10권4호
• /
• pp.225-233
• /
• 1978

통일(統一)과 진흥(振興)을 urea, $NH_4$, $NO{_3}^-N$ 별(別) 수경액(水耕液)에 재배(栽培)하여 유수형성기(幼穗形成期)에 중질소(重窒素)를 사용(使用) 각형태별(各形態別) 흡수속도(吸收速度) 및 체내(體內) 분포(分布)(2시간(時間))를 몇개 요인별(要因別)로 조사(調査)한 결과(結果)는 다음과 같다. 1. 질소전력(窒素前歷)이 공급질소(供給窒素)와 같은 경우 두품종(品種) 모두 $NH_4$ >urea> $NO_3$의 순(順)으로 흡수속도(吸收速度)가 크며 언제나 통일(統一)이 진흥(振興)보다 컸다(특히 $NH_4$에서) 이때 흡수(吸收)의 율원단계(律遠段階)(가장느린)는 urea는 근(根)${\rightarrow}$엽초, $NO_3$는 엽초${\rightarrow}$엽신(葉身), $NO_3$는 배양액(培養液)${\rightarrow}$근(根)의 단계(段階)를 보였다. 2. urea에 배양후(培養後) $^{15}NH_4$의 흡수속도(吸收速度)는 ($mgN/g{\cdot}root$ 2hr)의 통일(統一)의 경우 $18^{\circ}C-28^{\circ}C-38^{\circ}C$까지 직선적(直線的)으로 증가(增加)한다($Q_{10}$ 1.21 및 1.32 진흥(振興)은 차이가 없었다. $28^{\circ}C$에서의 암처리(暗處理)는 통일(統一)에서는 차이(差異)가 없었으나 진흥(振興)에서는 12%의 감소(減少)를 가져왔다. 3. 질소전력(窒素前歷)에 의한 N 형태별(形態別) 흡수속도(吸收速度)는 두품종(品種) 모두 $NH_4{\rightarrow}NO_3$ > $NO_3{\rightarrow}NH_4$ > $urea{\rightarrow}NO_3$의 순(順)이었으며 통일(統一)이 언제나 높았다(특히 $NH_4{\rightarrow}NO_3$ >에서), $urea{\rightarrow}NO_3$는 통일은 $NH_4{\rightarrow}NO_3$와 같고 진흥(振興)은 $NO_3{\rightarrow}NH_4$보다 약간 적었다. $NH_4{\rightarrow}^{15}NO_3$는 $NH_4{\rightarrow}^{15}NH_4 $보다 적었다(특히 통일(統一)). 4. $NH_4{\rightarrow}NO_3$의 경우 15분내(分內)의 흡수속도(吸收速度)는 2시간(時間)동안의 흡수속도(吸收速度)보다 크며 통일(統一)이 진흥(振興)보다 언제가 흡수속도(吸收速度)가 컸다. 5. 부위별(部位別) 중질소과잉률(重窒素過剩率) 및 중질소농도(重窒素濃度)와 근(根)의 중질소흡수속도(重窒素吸收速度)가 대사(大謝)와 전류(轉流)에 각각(各各) 다른 의미(意味)를 가지고 있으나 흡수선호성기준(吸收選好性基準)은 최후자(最後者)가 가장 좋은것 같았다. 질소형전력(窒素形前歷)과 형태별(形態別) 선호성(選好性)의 품종간차이(品種間差異)를 포장조건(圃場條件)과 수도(水稻)의 효율적(效率的) 시비방법(施肥方法)과 관련검토(關聯檢討)하였다.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.89-97
• /
• 2010

本文研究共同特性对于无选择权的影响, 并涉及到了调节焦点理论. 本文主要着眼于这三个因子以及他们之间的关系. 之前的研究已经广泛涉及到这三个方面. 第一, 共同特性影响已经被广为研究. Tversky (1972) 开创了这个理论, EBA 模型: 通过消除方面. 根据这个理论, 消费者在比较的过程中更易于注意特殊的特性, 而忽略共同特性. 最近, 更多的研究开始针对于此模型对于消费者行为的影响. Chernev (1997) 认为增加共同特性可以减少选择距离. 但是, 随后Chernev (2001) 的研究指出共同特性可能是消费者认知上的负担, 所以他们更喜欢启发式的过程而不是系统式的过程. 这些研究提出了一系列问题: 共同特性是否影响顾客选择? 如果是的话, 这些影响是什么样子的? 第二, 一些研究指出没有选择的状况是消费者最好的选择, 他们在犹豫不决时用这种方法回避选择. 其他关于这一理论的研究是时间的压力, 消费者自信, 以及可供选择的数量. 第三, 调节聚焦理论在目前非常流行. 消费者有两个焦点目标: 促进和制止. 促进聚焦主要和希望, 野心, 成功, 获得等有关; 而制止聚焦和责任, 职责, 安全, 规避等有关. 调节聚焦理论预测了顾客的感情, 创造, 态度, 记忆, 表现, 和判断. 而这些都是市场营销研究的领域这些文献为本文的研究提供了一些理论支持. 特别是增加共同特征而不是忽略他们可以增加选择过程中克制消费者的没有选择状况的比重, 其对于促进消费者的作用确实相反的. 本文通过两个试验进行验证. 第一个是2 X 2 组间的设计(共同特性X调节聚焦), 数码相机作为相关的客体. 特别的是, 调节聚焦变量是从11个问题中取得的. 共同特性包括焦距, 重量, 记忆卡, 电池, 而像素和价格作为独特特性. 结果证明了我们的假设, 那就是增加共同特性增加了克制消费者的无选择比重, 而对促进消费者没有作用. 第二个试验被用来复制第一个实验的结果. 这个实验和之前的基本相同, 只有两个方面不同—主要控制和研究客体. 在促进的前提下, 研究对象必须一些词例如: 利润, 野心, 高兴, 成功, 发展等. 在克制的前提下, 他们必学写下坚持, 安全, 保护, 规避, 损失, 责任等词. 实验证明我们假设是成立的. 本研究说明了共同特性对于顾客选择的二重效果. 增加共同特性可以提高或者降低无选择状况. 本文对于理论研究和实践上都有着贡献. 对于市场营销人员来说, 他们可能需要根据顾客的划分来考虑产品的共同特性. 理论上, 研究结果支持共同特性和无选择状况的调节变量. 最后, 本文也有一些不足, 例如过于强调态度的重要性等. 我们希望本文能够为未来的研究做出抛砖引玉的作用.

• 한국잡초학회지
• /
• 제6권2호
• /
• pp.174-190
• /
• 1986

조직배양(組織培養) 방법(方法)을 이용(利用)하여 제초제(除草劑)의 작용성(作用性) 및 제초제저항성(除草劑抵抗性) 검정방법(檢定方法)의 개선(改善)의 가능성(可能性)을 검토(檢討)하기 위해 1985년(年)~1986년(年)까지 2개년(個年)에 걸쳐 영남작물시험장(嶺南作物試驗場) 온실(溫室) 및 조직배양실험실(組織培養實驗室)에서 일련(一連)의 시험(試驗)을 진행(進行)하였던 결과를 요약(要約)하면 다음과 같다. 1) 제초제(除草劑) 작용성(作用成)을 연구(硏究)하는 데 사용(使用)되는 배지조건(培地條件)으로서는 기존의 MS, $N_6$, $N_6-Y_1$ 등(等)의 배지(培地)는 벼 자체(自體)의 생육(生育)을 50%이상(以上) 억제(抑制)하므로 현미배양배지(玄米培養培地)로서는 적합(適合)하지 않았으며, 생장조절제(生長調節劑)가 첨가(添加)되지 않은 순수한천배지(純粹寒天培地)를 이용(利用)하는 것이 바람직하였다. 2) 현미배양방법(玄米培養方法)에 있어서 제초제(除草劑)의 농도반응(濃度反應)을 뚜렷이 밝힐 수 있었으며, 대부분(大部分)의 수도용제초제(水稻用除草劑)은 지상부생육(地上部生育)보다 지하부생육(地下部生育) 억제정도(抑制程度)가 더 큰 것으로 나타났고, 광(光)의 유무(有無), 제초제(除草劑) 흡수부위(吸收部位)에 따라 작용성(作用性)의 차이(差異)를 보였는데 butachlor, 2,4-D, propanil은 광(光)이 있는 상태(狀態)에서, 그리고 DPX-F5384와 CGA 14264는 광(光)이 없는 상태(狀態)에서 생육억제(生育抑制) 영향(影響)이 컸다. 그리고 흡수부위(吸水部位) 반응(反應)에 있어서는 butachlor, chlornitrofen, oxadiazon, BAS-514는 근부(根部)와 유아부(幼芽部)를 동시(同時)에 제초제(除草劑)에 접촉(接觸)됨으로서 벼에 대(對)한 약해정도(藥害程度)가 증가(增加)되었고, 그 외(外) 제초제(除草劑)는 두 접촉방법간(接觸方法間)에 큰 차이(差異)를 보이지 않았다. 한편 피(E. crusgalli)의 경우도 비슷한 경향(傾向)이었으나, 전반적(全般的)으로 벼보다는 생육억제(生育抑制) 정보(程度)가 월등(越等)히 높았으나 butachlor, 2,4-D, chlornitrofen, oxadiazon, pyrazolate 및 BAS-514는 근부(根部)만 접촉(接觸)시켜도 피의 엽록소(葉綠素) 생합성(生合性)을 억제(抑制)시킬 뿐 아니라 생육(生育)이 거의 진전(進展)되지 않았으며, 그 외(外) 제초제(除草劑)들은 근부(根部)와 유아부(幼芽部)를 함께 접촉(接觸)시켜 주는 것이 바람직하였다. 3) 수도품종(水稻品種)의 제초제저항성(除草劑抵抗性)은 검정방법간(檢定方法間)에 다소차이(多少差異)를 보였는데 유묘검정(幼苗檢定)의 경우는 기존(旣存) 제초제(除草劑)인 butachlor, pretilachlor, thiobencarb, perfluidone, oxadiazon, 등(等)에 있어서는 일본형(日本型) 품종(品種) > 통일형(統一型) 품종(品種) > 인도형(印度型) 품종(品種)의 순(順)으로 제초제저항성(除草劑抵抗性)이 높았으나 DPX-F5384, NC-311, pyrazolate, pyrazoxyfen에 대(對)해서는 오히려 일본형품종(日本型品種)이 가장 낮은 저항성(抵抗性)을 보였으며, 현미검정(玄米檢定)의 경우 butachlor, propanil, chlornitrofen, oxadiazon, 등(等)에 있어서는 유묘검정(幼苗檢定)과는 달리 일본형품종(日本型品種)이 통일형품종(統一型品種)이나 인도형품종(印度型品種)보다 저항성(抵抗性)이 낮게 나타났다. 4) 동일품종(同一品種) 유형내(類型內)에서도 제초제저항성(除草劑抵抗性)의 품종간차이(品種間差異)를 보였는데 유묘검정(幼苗檢定)이나 현미검정(玄米檢定)에서 다같이 상대적(相對的)으로 저항성(抵抗性)을 보인 품종(品種)은 통일형(統一型)의 경우는 밀양(密陽)42호(號), 청청(靑靑)벼, 삼강(三綱)벼가 일본형(日本型)의 경우는 섬진벼가 낙동(落東)벼보다 인도형(印度型)의 경우는 IR50이 IR36보다 높은 저항성(抵抗性)을 보였다. 5) 현미배양방법(玄米培養方法)과 callus 배양방법(培養方法) 다같이 제초제(除草劑) 종류(種類)에 관계(關係)없이 제초제(除草劑) 농도(濃度)에 따른 벼 생육반응(生育反應)이 비슷하였는데, callus 생육반응(生育反應)이 더욱 민감(敏感)하였다. 6) 제초제(除草劑)에 대(對)한 callus 생육반응(生育反應)은 벼 뿐만 아니라 피 (E. crusgalli)에 있어서도 대단히 예민(銳敏)한 반응(反應)을 보였는데, $10^{-9}{\sim}10^{-8}M$의 저농도(低濃度)에서 제초제(除草劑) 종류간(種類間)의 차이(差異)가 뚜렷이 나타났으며, $10^{-7}M$ 이상(以上)의 농도(濃度)에서는 제초제성질(除草劑性質)에 관계(關係)없이 모든 제초제(除草劑)가 피의 callus 생육(生育)을 크게 억제(抑制)시켰다. 공시제초제(供試除草劑) 중(中)에서 BAS-514가 가장 낮은 농도(濃度)에서도 피의 callus 생육(生育)을 뚜렷이 억제(抑制)시켜 피에 대(對)한 살초력(殺草力)이 탁월(卓越)함을 알 수 있었다. 한편 제초제(除草劑)에 대(對)한 callus 생육반응(生育反應)은 광(光)의 유무(有無)에는 큰 영향(影響)을 받지 않았다.

• 헤리티지:역사와 과학
• /
• 제44권1호
• /
• pp.72-105
• /
• 2011

본 연구는 전북 완주군 동상면 대아리 산1-2번지의 도유림인 속칭 가막골 금낭화군락지의 천연보호구역적 가치를 검토하는 한편 금낭화군락지의 적정 생육환경을 구명하고 이를 바탕으로 금낭화군락지의 보전을 위한 기초자료를 제공할 목적으로 시도 되었다. 이를 위해 문헌 및 인터넷조사를 통해 '금낭화의 형태적 생태적 특성'과 '국내 천연기념물 초본군락의 지정현황 및 문제점'을 살펴보는 한편 현지조사를 통해 금낭화군락의 광환경, 토양환경, 식생조건 등을 조사 분석하여 가막골 금낭화군락지의 천연보호구역적 가치를 파악하고자 한 연구 결과는 아래와 같다. 국내 금낭화 자생군락지를 분석한 결과, 금낭화는 전국의 산지에 고루 분포되고 있으며 이 중 완주 가막골 금낭화군락지의 서식규모는 매우 큰 것으로 나타났다. 또한 금낭화군락지 분포에 대한 문헌 및 현지조사 결과, 준고냉지에서 생육이 월등하며, 생육왕성기인 5월의 풍부한 강수량은 금낭화 생육에 매우 필수적인 것으로 보아 가막골 금낭화군락지는 매우 전형적 기상여건을 보이는 서식지라 판단된다. 한편 금낭화 고밀도분포 군락의 환경 분석 결과, 전석지(轉石地) 토양을 기반으로 고도 300~375m의 범위에 있었으며 평균고도는 344.5m이고 자생지의 좌향(坐向)은 북향 또는 북서향도 포함되나 북동향(NE)이 압도적이었으며 평균 경사는 $19.5^{\circ}$로 나타났다. 또한 광조건 분석 결과, 4월부터 8월까지 생육기간인 5개월간 군락 내 광도는 평균 30,810Lux 이었으며, 생육 초기에는 낮았고 후기로 갈수록 광도는 상승하는 경향이었다. 금낭화 자생조건은 4~5월 생육기에는 약 14,000~18,000Lux 정도의 광조건이었으며, 개화 이후에는 상대적으로 광도 증가와는 관련 없이 결실이 이루어지는 것으로 판단된다. 토양환경 분석 결과, 토양산도(pH)는 표토, 5.2~6.1, 심토, 5.2~6.2로 거의 유사한 범위를 보였으며 표토의 평균 토양pH는 5.54, 심토는 5.58로 이 조건은 비교대상 군락지와 거의 유사하고 전형성이 큰 것으로 추정됨에 따라 가막골의 토양 안정성은 매우 높다고 판단된다. 식생환경 분석 결과, 조사구별 금낭화의 개체수는 13~52개체까지 심한 편차를 보였으나 군락내 발견된 분류군(taxa)은 총 126종류로 순수군락을 유지하면서도 높은 종다양성이 확인되었다. 그리고 대아수목원 금낭화군락지는 금낭화, 미나리냉이, 거북꼬리, 이삭여귀, 물봉선 등이 우점하는 식물사회로 확인되었으며 군락내 식별종(Differential species)은 물봉선, 꼭두서니, 칡, 산딸기와 고추나무, 광대싸리, 개다래로 밝혀짐에 따라 지형 및 토양습도에 따라 전형적 하위군락으로 구분되는 것으로 판단된다. 이와 같은 결과를 종합할 때, 완주군 동상면 대아리 가막골 금낭화군락지는 탁월한 관상성을 가진 자생식물의 서식처임을 확인할 수 있고, 본 군락은 전국분포상의 금낭화 자생군락으로는 국내 최대 규모로 추정되며 기상 및 지형, 토양조건과 식생환경이 군락지의 지속적인 생육 환경을 보장할 수 있는 매우 탁월한 서식지로 판단된다. 따라서 전형적 서식조건과 지속가능성이 큰 가막골 금낭화군락은 당연히 천연보호구역적 가치가 매우 큰 것으로 사료된다.

• 미술자료
• /
• 제100권
• /
• pp.50-80
• /
• 2021

본고는 원각사탑에 대한 지난 백 년간의 근대 학설사를 층수에 초점을 맞추어 비판적으로 성찰하였다. 먼저 제II장에서는 근대 개항기에 조선을 여행한 서양인들이 종래 한성의 '비미(非美)'내지는 흉물로 간주되던 원각사탑을 한성의 '기관(奇觀)'내지 '위관(偉觀)'으로 재발견하는 역동적인 과정을 추적하였다. 이들은 불탑에 관한 예비지식이 거의 없는 서양 출신이었기 때문에, 역설적으로 원각사탑에 대하여 객관적인 견문기를 남길 수 있었는바, 그들이 접촉한 조선 지식인들을 통하여 대체로 13층설을 받아들였다. 이어서 제III장에서는 대한제국 선포 이후 일인 관변학자들이 원각사탑을 본격적으로 학술 조사하고, 일제식민기 동안 조선총독부가 원각사탑을 문화재로서 관리하는 과정 및 그 문제점을 언급하였다. 특히 지난 100여 년 동안 원각사탑 층수 문제에 관하여 가장 큰 영향력을 행사한 세키노 타다시(關野 貞)의 학설이 10층설에서 13층설로, 다시 다층설로 변하는 문제를 집중 조명하였다. 마지막으로 제IV장에서는 해방 이후부터 1962년까지 원각사탑에 대한 인식이 다층설에서 10층설로 바뀐 경과를 정리하되, 선행하는 일제식민기 조선 지식인들의 인식이 13층설 일변도였음을 특기해두었다. 다만 1962년 이후 지금까지 원각사탑에 관련하여 중요한 연구성과가 적지않이 발표되었지만, 층수에 관한 한 대부분 1962년에 확정된 10층설을 전제로 하였기 때문에, 본고에서는 따로 정리하지 않았다. 학설사 검토의 결과, 원각사탑이 13층탑으로서 건립되었다는 근거가 명백함에도 불구하고, 일제시기는 물론 해방 이후 지금까지 백 년이 넘도록 13층설은 단 한 번도 공인받지 못하였으며, 학계에서 층수 문제가 본격적으로 다루어지지도 않았음을 확인할 수 있었다. 원각사탑과 경천사탑이 10층탑이라는 현재의 통설은, 백 년 전에 세키노 타다시(關野 貞)가 최초로 주창하였다. 세키노는 원각사에 남아있는 「원각사비」가 글자를 거의 판독할 수 없을 정도로 마멸이 심하였기 때문에 원각사탑의 현상만 건축학의 관점에서 고찰하고 10층탑이라고 주장하였다. 공교롭게도 그 직후에 발견된 『속동문선』에 실린 「원각사비」에서 '탑 13층을 세웠다.'라는 구절이 확인되었다. 또한 15세기 후반 왕명으로 『동국여지승람』을 편찬한 편찬자들도 원각사탑의 모범인 경천사탑 또한 '13층탑'임을 분명히 인식하고 있었다. 특히 원각사탑 건립 직후 왕명으로 건립된 「원각사비」는 세키노의 10층설이 전제에 오류가 있음을 명백히 보여준다. 세키노는, '3층의 기단 위에 탑신 10층이 올려져 있어서, 세상 사람들이 13층탑이라고 불렀다.'라고 하였는데, 「원각사비」는 세조가 처음부터 13층탑으로서 원각사탑을 건립하였음을 생생하게 증언한다. 다만 이례적이게도 13층탑을 3층의 기단 위에 탑신 10층을 올린 형태로 조성하였을 따름이다. 그렇다면 세조는 왜 13층탑을 세웠으며, 왜 그것을 3층의 기단 위에 탑신 10층이라는 이례적인 형태로 구현하였는가? 세조가 원각사13층탑을 건립한 의도를 온전히 이해하려면, 먼저 원각사탑의 정체를 파악해야 하는바, 그 첫 단추는 원래의 명칭을 회복하는 데 있다. 필자는 전제의 오류 위에 구축된 세키노의 10층설-나아가 절충적인 다층설-은 이제 폐기하고, 「원각사비」에서 말하는 13층설을 복원할 것을 촉구한다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국작물학회지
• /
• 제18권
• /
• pp.88-123
• /
• 1975

본 연구는 대맥의 다수확 재배기술 개선의 기초자료를 얻고져 작물시험장(수원) 맥류포장에서 수원18호를 공시하여 1969년부터 1970년까지 2개년간 시비량, 파종기 및 파종량을 달리 하여 이들 처리가 수량 및 수량구성요소에 미치는 영향과 이들의 형성과정을 추구하였으며 또한 수원18호외 7품종을 공시하여 파종기이동에 따른 품종들의 수량 및 수량 구성요소의 변화를 검토한바 그 결과를 요약하면 다음과 같다. 1. 수원에서 대맥 수원 18호의 출현이수는 파종기 (9월 21일에서 10월 31일까지)에 따라 8~19일정도 소요되었고 조파할수록 빠른 경향을 보였으며 대체로 지중 5cm의 적산온도가 15$0^{\circ}C$내외면 출현하였다. 2. 파종기에 따른 냉해정도의 차이는 월동기간의 대맥 생육정도와 기상조건의 영향이 크며 월동전 생육이 과도하거나 주간출엽수가 5~6엽에 미달되면 냉해에 약하였다. 3. 주간출엽수는 파종기에 따라 11매로부터 16매까지 변화하지만 대체로 원동전 주간출엽수의 차이가 심하고 원동후 주간출엽수의 차이는 적으며 특히 9월 21일 파종부터 10월 11일 파종까지의 주간출엽수의 차이는 월동전 주간출엽수의 차이에 의하여 나타났다. 4. 월동전 지상부 건물생산량은 조파구에서 많고 만파할수록 적었으나 월동후에는 파종기에 따른 지상부 건물생산량의 차이가 적었으며 생육 재생기부터 출수기까지는 건물생산량이 급증하고 등숙기간에는 증가율이 낮았다. 5. 1$\m^2$당 경수는 대체로 조파한 것이 만파한 것보다, 후파한 것이 박파한 것보다 많았다. 개체당 분얼은 후파할 때는 적고 파종기에 따른 차이는 미미하였으나 박파하였을 때는 파종기에 따른 변이가 컸다. 조파에서는 파종량이 많아 질수록 개체당 분얼수가 현저히 감소되나 만파시에는 파종량의 영향이 적었다. 6. 최고분얼기는 조파할 경우에 일찍 오고 만파할 경우에 늦게 오며 파종량에 따른 차이가 크지는 않았으나 대체로 파종량이 많을수록 빨리 오는 경향이었다. 7. 분얼최성기는 파종기에 관계없이 주간출엽수가 4~6매일 때이었다. 8. 1$\m^2$당수수는 해에 따라 차이가 있으나 시비량이나 파종량이 증가할수록 많아졌으며 시비량과 파종량을 함께 증가할 때에는 수수의 확보가 용이하고 이러한 경향은 특히 적기파종에서 컸다. 또한 많은 수수를 확보하는 데는 적기 파종이 파종량 증가보다 중요하고 만파시에는 파종량을 증가시키는 것이 유리하였다. 9. 품종별 파종기에 따른 1$\m^2$당 수수는 대체로 모든 품종에서 만파할수록 감소되었으나 수원18호, 여기, 항미, 부흥는 수원 004, 수원006 칠보 및 영월 6각보다 만파에 의한 감소율이 적었다. 10. 1$\m^2$당 수수와 1$\m^2$당 경수와의 상관 관계를 보면 9월 21일 파종에서는 출수기부터, 10월 1일 파종에서는 월동전에, 10월 11일 파종부터 10월 31일 파종까지는 전 생육기간에서 대체로 높은 정의 상관이 있었으며 3월 하순부터 4월 상순까지는 어느 파종기에서나 상관정도가 낮았다. 11. 유효경 비율은 파종기 및 파종량에 따라 33~76%까지의 넓은 변이폭을 보였으며 50%정도에서 수량이 가장 높았고 파종량에 따른 변이폭보다 파종기에 따른 변이폭이 컸다. 또한 조파에서 유효경 비율이 낮고 만파일수록 높아 가는 경향이었으며 파종량이 증가하면 유효경 비율이 다소 감소하는 경향이었다. 품종별로는 수원18호, 항미, 여기 및 부흥는 유효경 비율이 높으며 이들 품종들은 만파할 경우의 증가율이 컸고 칠보, 수원004, 수원006, 영월6각은 유효경 비율이 낮고 만파에 의한 증가율도 낮았다. 12. 1수립수는 어느 경우에나 시비량이 증가할수록 증가하였고 파종량이 증가할수록 감소하였으며 파종기에 따라서는 10월 21일(1969), 10월 1일(1970)파종에서 1수립수가 가장 적었으며 이보다 조파하거나 만파할수록 증가하였다. 한편 품종별로는 파종기에 따른 경향이 일정하지 않았다. 13. 천립중은 1$\m^2$당 수수와 1수립수에 비하여 시비량, 파종기 및 파종량 차이에 따른 변이폭이 작았으나 년차변이는 컸으며, 파종량이 증가할수록 천립중은 다소 감소하였다. 품종별로는 차이가 뚜렷하여 부흥과 칠보는 대체로 무거웠고 수원18호, 항미 및 여기는 비교적 가벼웠다. 14. 수원지방의 파종적기는 10월 1일~10월 11일로 인정되었고, 시비량 증가에 따라 수량은 대체로 증가하였으며 조기 파종시의 수량감소를 비료증가로 다소 경감시킬 수 있었다. 15. 파종량 차이에 따른 수량의 변이폭은 시비량이나 파종기차이에 따른 변이폭보다 비교적 적었고, 조파나 소비조건에서는 파종량 차이에 따른 수량 변이가 미미하였다. 또한 파종량은 증가시킬 경우 증비의 효과가 크며 만파시에는 파종량의 증가로 수량의 심한 감소를 보상할 수 있었다. 16. 적정 파종량은 시비량 증감에 따라 다소 차이가 있었으나 10a당 시비량 10.5-6.6kg 수준에서는 10a당 파종량을 18~26$\ell$까지 증가시키는 것이 수량의 안정을 기할 수 있었다. 17. 파종적기는 품종별로 다소 달랐으며, 수원006 수원004 및 부흥은 비교적 조기 파종에서 증수되었고 수원18호, 여기 및 항미는 19월 1일경 파종에서 증수를 보였으며 부흥은 만파 적응성이 높았다. 18. 수량과 수수와는 모든 처리에서 고도의 정상관을 보였는데 시비량이 증가할수록 상관이 높아졌고 파종량이 증가할수록 수량과 수수의 상관은 낮았다. 수량과 1수립수는 대체로 부의 상관을 보였으며 천립중과 수량과는 상관 정도가 낮았다.

• 농촌의학ㆍ지역보건
• /
• 제20권1호
• /
• pp.1-13
• /
• 1995

본 연구는 변화되고 있는 지역사회보건사업의 요구에 따른 연도별 보건소 간호사들의 역할 변화, 역할 수행에 따른 장애요인 및 간호업무 수행과 관련하여 인지하는 직무만족도를 파악하고자 1992년 3월 19일부터 4월 11일까지 경상남도 보건간호사 270명을 대상으로 설문조사한 결과는 다음과 같다. 보건간호사들이 수행한 최우선 보건사업은 1970년 이전에는 가족계획사업, 1970 - 1979년대에는 간호업무, 1980 - 1989년대에는 모자보건사업, 1990 - 1992년대에는 간호업무이었다. 가족계획사업 내용의 우선순위는 1970년 이전에는 자궁내장치 삽입 권장과 경구피임약 또는 콘돔 배부에 역점을 두었으며 그 이후로는 가족계획 홍보를 우선으로 했다. 모자보건사업 내용의 우선순위는 1970년 이전부터 임부등록에 많이 두었으며 그 다음으로 산전진찰과 예방접종에 치중한 것으로 나타났다. 결핵관리사업 내용의 수선순위를 보면 각 년대마다 신환자 발견 등록에 치중하였으며 그 다음으로 환자관리 및 투약 주사에 비중을 두었다. 간호업무 냉용의 우선순위를 보면 1970년대 이전에는 순회진료에 역점을 두었으며 그 다음으로 주사 및 투약에 치중하였다. 전염병관리 내용의 우선순위는 1970년 이전부터 1순위였으며 그 다음으로 투약 및 주사에 치중하였다. 1990-1992년대에는 상담 및 교육이 2순위로 나타났다. 노인보건사업 내용의 수선순위가 1979년대 이전부터 순회진료가 1순위였으며 그 다음으로 검진보조가 2순위로 나타났다. 사업별 업무수행시 장애요인을 보면 가족계획 사업에서는 주민의 이해부족이 28.8%, 예산부족이 13.6%, 보건행정체계 미비가 11.9%였으며, 결핵사업에서는 주민의 이해부족이 32.5%, 업무과다(인원부족)가 15.6%, 기술이나 지식의 부족이 13.0%였다. 업무과다(인원부족)와 시설 장비의 부족이 각각 15.6%, 주님의 이해부족이 13.0%였다. 직급별 보건간호사의 직무만족도에서 경력이나 능력에 비해 승진기회여부는 불만이다가 8,9급이 64.7%로 높았으며 전문직 발전의 기회는 없다가 6,7급이 67.7%, 8,9급이 64.0%로 높았다. 보건업무에 필요한 물품과 시설의 만족여부에서 하위급으로 내려갈수록 만족도는 낮았으며 보수의 만족도에서는 적당하다가 6,7급이 64.7%, 너무 작다가 8,9급이 53.0%로 높았다. 직급별 보건간호사의 직업 긍지 만족도에서 직급이 높을수록 직업적 긍지의 직무만족도는 높았다. 직급별 현 직급에 대한 만족도는 하위급으로 내려갈수록 만족하는 사람의 비율은 높아졌다. 보건간호사의 경력(년)별 직무만족도에서 보건간호사 경력이 많을수록 직급, 승진기회, 전문직 발전의 기회에 대한 직무만족도는 낮게 나타났다. 보건간호사의 경력(년)별 직업 긍지 만족도에서 보건간호사 경력이 많을수록 직업적 긍지의 직무만족도는 높게 나타났다. 대상자의 37.6%가 이직할 의사가 있다고 하였으며, 승진기회의 부족, 근무여건의 불만이 이직 이유였다. 하력과 경력은 직무만족도 사이에 유의한 상관관계가 없었으며 직급이 낮을수록 직무만족도는 낮아 유의한 관련성을 나타내었다. 1차 보건의료사업을 수행토록 하기 위해서는 보건간호사의 인식이나 주민들의 인식을 새롭게 하기 위한 홍보활동 및 교육이 더 주어져야 할 것이며 보건간호사의 승진기회 및 직급에 대란 불만도가 높기 때문에 보건간호사의 승진제도개선 및 직무영역확대가 고려되어야 할 것이다. 그래서 간호업무에 만족할 수 있는 제도개선에 대해 고려해야 할 것으로 생각된다.

• 한국직업건강간호학회지
• /
• 제3권호
• /
• pp.54-70
• /
• 1993

According as the automation of clerical work(OA ; Office Automation) develops, the use of VDT(Visual or Video Display Terminal) is increasing suddenly. But, in proportion to the spread of office automation(OA tendency), the self-conciousness syptom attendant upon the work is appearing also (Kim, Jung Tae, Lee, Young Ook, 1990). The apparatuses of office enable the clerical workers to be convenient and perform mass businesses. But, they are increasing the opportunity to be exposed to VDT syndrom, techno stress, computer terminal disease, pain by muscle strain(RSI), bradycausia of noise nature, and electromagnetic waves, etc. which are referred to as the new type of occupational diseases to the workers. It is the real situation that the workers to use VDT is complaining of the physical inconvenience sense in the recent newspaper and literature, it is the point of time that the sydrome to come from VDT use and computer terminal disease, etc. must be classified into the occupational disease(Lee, Kwang Young 1990, Lee, Kyoo Hak 1990, Lee, Won Ho 1991, Lee, Si Young 1991, Lee, Joon 1991, Choi, Young Tae 1991, Heo, Seung Ho 1989). In addition, it is the real situation that the scientifitic study result about the scope that electromagnetic waves has influence on the human body has not been suggested yet, and criticism on the stable exposure permission standard about electromagnetic waves to be emitted from VDT and on the problem in the health about electromagnetic waves is continuing. (IEEE Spectrum, 1990). In addition according to the experience of nursery business of industry field, it is the real situation that the patients who consult complaining of physical and mental inconvenience sence, among the users of apparatus of office automation, are reaching 10% of the patients coming to doctor's room. Therefore, it is necessary to confirm the self-consciousness symptom that the clerical workers complain of multilaterally with the actual state examination about the use of the apparatuses of offices automaton. Thus, this study was tried as th basic data for the cosultation and education for the maintenance and furtherance of the health of workers as the nurse of industry field, by confirming the contents of self-consciousness symptom attendant upon the use of the apparatus for office outomation making the financial institution in which the spparatus for office automation in most frequently used as the subject, and by examining whether there is the difference according to the subject of study, the data were collected, by using the questionnaire method, making 200 workers who consented to the study participation as the subject, among the persons who have spent over 3 months since they used the apparatuses for office automation and didn't receive the treatment in hospital due to the clerical disease for recent 3 years. The period of data collection was from Oct. 9, 1991 to Oct. 12. As for the measurement instrument about the complaint if self-consciousness symptom attendant upon the use of apparatuses fo office automation, the question item on the complaint symptom of health problem attendant upon the treatment of VDT that Kim(1991) developed and on CMI health problem and the question items on the fatigue degree due to industry were used by previous examination to 25 persons. Collected data were analyzed with the statistical method such as percentage, arithmetic mean, Person correlation coeffient, Kai square verfication, t-test, ANOVA, etc. by using SPSS/PC+ program, and the result is as follows : 1. The self-consciousness symptom that the clerical workers complained of most frequetly appeared high in 'My eyes are tired'(99.4%), 'I feel fatigue and weariness'(99.4%), 'I feel that my head is heavy5(90.0%), 'eyesight fell'(88.8%), 'I have a stiff neck'(88.8%), 'I fell pain in the shoulder'(85.0%), 'I feel cold and painful in the eyes'(76.9%), 'I feel the dry sense of eyeball'(76.2%), 'My nerves are edgy, and I an fretful, (75.6%), 'I feel pain in the waist'(73.2%) and 'I fell pain in the back'(72.8%). It emerged that the subject use the apparatuses for office automation complained of self-consciousness symptoms related to visual symptoms and musculoskeletal symptoms. 2. As for the general feature of examination subjects, the result to see the distribution by classifying into sex, age, school career, use career of apparatuses for office automation, skillfulness degree of the use of apparatus for office automation, use hours of the apparatuses for office automation per 1 day, type of business of the apparatus for office automation, rest hours during the use of apparatus for office automation, satifaction degree of business of office automation, and work circumstance, etc. emerged as follows : As for the sex of subjects, the distribution showed that men were 58.8% and women were 41.3%, Age was average 26.9. As the distribution of school career, the distribution showed that4below the graduation of high school' was 58.8%, 'graduation from junior college-university' was 35.0%, and 'over graduate school' was 6.3%. In the question to ask the existence or non-existence of experience of health consultation in connection with the work of office automation, the response that I had the consultation exprience and I feel the necessity emergerd as 90.1% And, the case that the subject who didn't wear the glasses or lens before using the OA apparatus wear glasses or lens after using OA apparatus emerged as 28.3% of whole. As for the existence or non-existence of use career of OA apparatus, the case under 3 years was highest as 52. 7%. As for the skillfulnness degree about the use of apparatus for office automation, most of them are skillful with the fact that 'common' was 44.4%, 'skill' was 42.5%, and 'unskillful' was 13.1% As for the use average hours of the apparatus for office automation per 1 day, the distribution showed that the case under 3-6 hours was 33.1%, the case under 6-9 hours was 28.1%, the case under 3 hours was 30.6%, and the case over 9 hours was 8.1% Main OA business and the use hours for 1 day showed in the order of keeping and retrieval, business of information transmission(162min), business of information transmission(79.3 min), business of document framing(55.5 min), and business of duplication and printing(25.4min). as for the rest during the use of apparatus for affice automation, that I take rest occasion demands the major portion, but that I take after completing the work emerged as 33.8%. Though the subiness gets to be convenient by the use of the apparatus for of office automation, respondents who showed the dissatisfaction about the present OA business emergd high as 78.1%. The work circumstances of each office was good with the fact that the temperature of office was 21.8, noise was average 42.7db, and the illumination was average 364.4 lx, in the light of ANSi/HFS 100 Standard. 3. Sight syptom, musculoskeletal symptom, skin and other symptoms showed the significant difference according to the extent of skillfulness of the apparatus for office automation. All the symptoms exept skin symptom showed the difference according to the use hours of the apparatus for office automation. All the question items exept the sytoms of digestive organs and the rest hours during the apparatus for office automation showed the signicant difference. The question item which showed the signicant difference from the satisfaction degree of present OA business showed the significant difference from all the question item classified into 6 groups. But, age and school career didn't significant difference from the complaint of any self-consciousness symptoms.