• Clinical Endoscopy
• /
• 제56권5호
• /
• pp.546-552
• /
• 2023

Techniques for upper gastrointestinal endoscopy are advancing to facilitate lesion detection and improve prognosis. However, most early tumors in the upper gastrointestinal tract exhibit subtle color changes or morphological features that are difficult to detect using white light imaging. Linked color imaging (LCI) has been developed to overcome these shortcomings; it expands or reduces color information to clarify color differences, thereby facilitating the detection and observation of lesions. This article summarizes the characteristics of LCI and advances in LCI-related research in the upper gastrointestinal tract field.

• Journal of the Optical Society of Korea
• /
• 제1권2호
• /
• pp.116-119
• /
• 1997

Highly quantum efficient and multi-color emissible polymer light emitting devices have been realized utilizing poly (1-dodecyloxy-4-methyl-1, 3-phenylene)(2, 5"-terthienylene)(hereafter, mPTTh polymer) as an emitting layer and tris(8-hydroxyquinoline) aluminum (Alq3) as an electron transport layer. A single layer EL device of mPTTh polymer emits orange-colored light. EL efficiency increases as the thickness of Alq3 layer increases, but the emission color becomes visually broad when the Alq3 layer thickness is greater than 30nm since the relative peak intensity of green EL from Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer increases. EL efficiency of the double layer device was greatly enhanced by 3000 times compared with that of a single layer device. Alq3 layer in device acts as a hole blocking electron transporting layer and an emitting layer as a function of the thickness of Alq3 layer.ayer.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1727-1734
• /
• 2013

Synthesis and characterization of some novel symmetric bis-azospiropyrans are reported in this study. These bis-azospiropyrans are bifunctional chromophores with two spiropyrans linked by a bis-azo extended aromatic system that produce more color strength (large molar absorption coefficient in mero forms) due to appending two azospiropyran chromophores on one molecule. Comparing to the molar absorption coefficients of the conventional spiropyran chromophores (${\varepsilon}=0.31{\times}10^4\;M^{-1}{\cdot}cm^{-1}$) and mono-azospiropyran chromophores ($1.35{\times}10^4\;M^{-1}{\cdot}cm^{-1}$), the novel synthesized photochromes showed astonishingly increased molar absorption coefficients ($2.3-3.8{\times}10^4\;M^{-1}{\cdot}cm^{-1}$) at the same conditions. Such high molar absorption coefficients confers high sensitivity to light and more color intensity of mero form, that leads to improvement of their light sensitivity and better discrimination of spiro (OFF) form from mero (ON) ones in molecular switches. The structures were deduced from their MS, FT-IR, and $^1H$-NMR spectroscopic data and CHN analysis. All the synthesized photochemically bifunctional compounds revealed fluorescent emission in their colorless form which was faded out after exposing to UV light. Fluorescence quantum yield values of the mero forms were 0.25-0.81 and two high fluorescence quantum yield values (0.60 and 0.81) were found in these series.

• 한국의류산업학회지
• /
• 제17권5호
• /
• pp.828-837
• /
• 2015

The results of the analysis of dyed rayon fabrics treated with persimmon juice by padding are as follows. Rayon fabrics were dyed repeatedly with persimmon juice by a padding mangle for the development of dyeability. The merits of padding-based dyeing were easier color reproduction (versus traditional hand dyeing) of hard to obtain colors and color fastness to light and laundering. The add on weight increased with the number of padding times, and the color of the dyed fabrics had red-yellow colors with low brightness and high chromatic colors. Properties of fabrics treated with persimmon juice were: $2^{nd}$ level of light resistance, $4^{th}-5^{th}$ perspiration fastness levels, rubbing fastness, and $3^{rd}-4^{th}$ washing fastness levels. Dyed fabrics exposed to UV light have a deep yellow-red color that increased lightness and darken when exposed to sunlight. Rayon fabrics of a treated premordant indicated strong yellow colors, especially fabrics with Fe mordant indicated greenish red-yellow colors. The direction of the weft and warp increased and improved water-repellent qualities that increased with the number of dyeing padding times and persimmon juice; however, there was less anti-crease resistance. In addition, fabrics had good antibacterial activity and deodorization.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.357-361
• /
• 2009

The authors have demonstrated white oraganic light-emitting diodes (WOLED) using 1,4-bis[2-(4'-diphenylaminobiphenyl-4-yl)vinyl]benzene as fluorescent blue emitter and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate as phosphorescent red emitter. The optimized WOLED using red host material as bis(2-methyl-8-quinolinato) -4-phenylphenolate exhibited proper color stability in comparison with the control device using 4,4'-N,N'-dicarbazole-biphenyl as red host. The white device showed a maximum luminance of 21100 $cd/m^2$ at 14 V, luminous efficiency of 9.7 cd/A at 20 $mA/cm^2$, and Commission Internationale de I'Eclairage ($CIE_{x,y}$)coordinates of (0.32, 0.34) at 1000 $cd/m^2$. The devices also exhibited the color shift with ${\Delta}CIE_{x,y}$ coordinates of ${\pm}$ (0.01,0.01) from 100 to 20000 $cd/m^2$.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.64-68
• /
• 2015

In this paper, LED lighting system is realized by using Bluetooth wireless communications and smartphones. A bluetooth module with a lighting control function is manufactured by miniaturizing a development board of TI company and the volume of LED dimming system as a whole is reduced. And a trial product is materialized by designing a hardware composed of the manufactured bluetooth module, LED down light equipped with degree warm white and cool white, and 2-channel LED driver; and LED dimming software. The materialized trial product is controled in terms of the brightness and color temperature of LED light source using an application of a smartphone. The experiment showed that the users can easily control the intensity of illumination of LED light source by using the scroll bar of the applications of smartphones. In addition, the color temperatures of both warm white and cool white can be controlled, and when the color temperature of the trial product using the manufactured bluetooth module is compared with that of a trial product of TI company, they show the same color temperatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.418-420
• /
• 2009

The Authors have demonstrated high efficiency hybrid white organic light-emitting diodes (HWOLED) for reduced efficiency roll-off and color stability. It was shown that HWOLED fabricated in this study have the maximum luminance of 46 420 cd/$m^2$ at 8 V (turn-on voltage of 2.7 V), external quantum efficiency of 13.18%, power efficiency of 28.75 lm/W at 1 000 cd/$m^2$, and reduced efficiency roll-off of 2.7 times than control white device. The HWOLED also showed the stable color shift with $\Delta$Commission Internationale de I'Eclairage coordinates coordinates of ${\pm}$ (0.00, 0.00) from 100 to 10000 cd/$m^2$.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.1123-1127
• /
• 2005

본 논문에서는, 퍼지 유사도 평가를 이용한 객상인식에 관한 알고리즘을 소개하며, 이러한 알고리즘을 적용한 색상인식 시스템을 구성하였다. 객상의 분포를 판별하는 수단으로써 임의의 색상영역의 색입자 분포를 나타내기 위해 퍼지 멤버쉽을 구성하였으며, 멤버쉽의 평가를 위한 유사도 평가 방법을 사용하였다. 색상 정보는 RGB와 함께 HLS 색 좌표계를 사용하여 색인식의 정확성을 높였으며, 특히 HLS 좌표계 요소 중 Hue(색도)정보의 적절한 사용으로 조명과 재질변화에 강인한 알고리즘을 얻을 수 있었다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.227-232
• /
• 1999

We have been making researches on 3-D displays using computer-generated holograms(CGHs). Our CGHs are binary Fresnel holograms that reconstruct point light sources and are recorded by using high resolution laser printers (image setters). We use an image setter with a resolution of 5080 dots per inch. It is possible to reconstruct CGHs with light-emitting points. As the resolution of the image setter is not so high, it is better to use a spherical wave as a reference beam. We considered the recordable points objects are restricted by the low resolution, and proposed the multiplex type hologram to reduce the number of point objects recorded in the unit area of the CGH. We proposed a method to make computer-generated color hologram which could reconstruct color point light sources, by combining RGB color filters with the stripe CGHs corresponding to each color. We considered two kinds of gradation method on our binary CGHs. In this paper, we propose a multiple reconstruction method for improving the narrow viewing field.