• Imaging Science in Dentistry
• /
• 제40권4호
• /
• pp.155-158
• /
• 2010

Digital radiographic systems allow the implementation of a fully digital picture archiving and communication system (PACS), and provide the greater dynamic range of digital detectors with possible reduction of X-ray exposure to the patient. This article reviewed the basic physical principles of digital radiographic imaging system in dental clinics generally. Digital radiography can be divided into computed radiography (CR) and direct radiography (DR). CR systems acquire digital images using phosphor storage plates (PSP) with a separate image readout process. On the other hand, DR systems convert X-rays into electrical charges by means of a direct readout process. DR systems can be further divided into direct and indirect conversion systems depending on the type of X-ray conversion. While a direct conversion requires a photoconductor that converts X-ray photons into electrical charges directly, in an indirect conversion, lightsensitive sensors such as CCD or a flat-panel detector convert visible light, proportional to the incident X-ray energy by a scintillator, into electrical charges. Indirect conversion sensors using CCD or CMOS without lens-coupling are used in intraoral radiography. CR system using PSP is mainly used in extraoral radiographic system and a linear array CCD or CR sensors, in panoramic system. Currently, the digital radiographic system is an important subject in the dental field. Most studies reported that no significant difference in diagnostic performance was found between the digital and conventional systems. To accept advances in technology and utilize benefits provided by the systems, the continuous feedback between doctors and manufacturers is essential.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.1-11
• /
• 1997

Austomated visual inspection(AVI) capability has become an important key component in the automated manufacturing system. In such a visual inspection system an intensity(or color) image of a scene is quickly affected by optical property of objects, condition and roughness of surface, lens and filters, image sensor property and lighting system. In particular, the lighting system disign is the most important factor, since it affects overall performance of the visual system. For fast and cheap automated visual inspection system it is important to obtain the good image quality which results from careful attention to the design of the lighting system. In this paper, the lighting subsystem of AVI system is analysed for the inspection of printed circuit board(PCB) patterns. The spectral reflectance of materials, which are composed of PCB, is measured for choosing the light source. The reflection property is theoretically obtained by a reflection model and also obtained by experiments which measure intensity with varying the viewing direction of image sensor and the lighting direction of illuminator. The illumination uniformity of a ring-type illuminator. The lighting system is designed based upon the experimental results and theoretial analysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.185-185
• /
• 2011

ZnTe semiconductor is very attractive materials for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. Another application to photovoltaics proved that ZnTe is useful for the production of high-efficiency multi-junction solar cells [2,3]. By using the pulse laser deposition system, ZnTe thin films were deposited on ZnO thin layer, which is grown on (0001) Al2O3substrates. To produce the plasma plume from an ablated ZnO and ZnTe target, a pulsed (10 Hz) YGA:Nd laser with energy density of 95 mJ/$cm^2$ and wavelength of 266 nm by a nonlinear fourth harmonic generator was used. The laser spot focused on the surface of the ZnO and ZnTe target by using an optical lens was approximately 1 mm2. The base pressure of the chamber was kept at a pressure around $10^{-6}$ Torr by using a turbo molecular pump. The oxygen gas flow was controlled around 3 sccm by using a mass flow controller system. During the ZnTe deposition, the substrate temperature was $400^{\circ}C$ and the ambient gas pressure was $10^{-2}$ Torr. The structural properties of the samples were analyzed by XRD measurement. The optical properties were investigated by using the photoluminescence spectra obtained with a 325 nm wavelength He-Cd laser. The film surface and carrier concentration were analyzed by an atomic force microscope and Hall measurement system.

• 한국정보시스템학회지:정보시스템연구
• /
• 제25권1호
• /
• pp.75-104
• /
• 2016

Purpose The business ecosystem perspective offers a new lens in which to view customers. Customers as the member of business ecosystems influence firms by participating in both the firm level activities and the business ecosystem level activities. For example, customers participate in the business ecosystems by forming interest groups, allowing their voice to be heard the within business ecosystems. Customers can also, turn public opinion around and foster the business ecosystems favorable to firms. On the other hand, as an extreme case of customer participation, customers can engage in community activities to boycott the purchase of products or services from certain firms or business ecosystems. Design/methodology/approach This study views content creation and feedback activities as customer participation in the firm level. On the other hand, word-of-mouth (WOM) and boycott activities are considered as customer participation in the business ecosystem level. This study presents a research model regarding the relationships among customer socialization, customer participation, and psychological ownership. The proposed model is validated through an empirical analysis on online platform business ecosystems. Findings When the two business ecosystems are compared, different results were drawn. In the Facebook ecosystem, boycott and psychological ownership did not have a significant relationship. However, in the Kakao ecosystem, the two had a significant positive relationship. The mediating effect of the business ecosystem type sheds a light on the mission, purpose, vision, and other values associated with the theory of the business on the customer-firm relationship. Further implications for theory and practice were discussed in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1223-1227
• /
• 2005

Fine microgroove is the key component to fabricate micro-grating, micro-grating lens and so on. Conventional groove fabrication methods such as etching and lithography have some problems in efficiency and surface integrity. This study deals with the creation of ultra-precision micro grooves using non-rotational diamond tool and CNC machining center. The shaping type machining method proposed in the study allows to produce V-shaped grooves of $40\mu{m}$ in depth with enough dimensional accuracy and surface. For the analysis of machining characteristics in micro V-grooving, three components of cutting forces and AE signal are measured and processed. Experimental results showed that large amplitude of cutting forces and AE appeared at the beginning of every cutting path, and cutting forces had a linear relation with the cross-sectional area of uncut chip thickness. From the results of this study, proposed micro V-grooving technique could be successfully applied to forming the precise optical parts like prism patterns on light guide panel of TFT-LCD.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.578-583
• /
• 2011

We report on the design of a holographic homogenizer composed of a periodic hologram and a condensing lens. If the hologram is periodic, the homogenizer is free from the alignment error of the incident laser beam. Holographic homogenizer also has an advantage of the flexibility in the size of the target beam. We calculated theoretically the Fraunhofer diffracted wave function when a rectangular laser beam is incident on a periodic hologram. The diffracted wave is the sum of sinc functions at regular distance. The width of each sinc function depends on the size of the incident laser beam and the distance between the sinc functions depends on the period of the hologram. We calculated numerically the diffracted light intensity for various ratios of the size of the incident laser beam to the period of the hologram. The results show that it is possible to make the diffracted beam uniform at a certain value of the ratio. The uniformity is high at the central part of the target area and low near the edge. The more sinc functions are included in the target area, the larger portion of the area becomes uniform and the higher is the uniformity at the central part. Therefore, we can make efficient homogenizer if we design a hologram so that the maximum number of the diffracted beams may be included in the target area.

• 수산해양기술연구
• /
• 제25권4호
• /
• pp.200-208
• /
• 1989

200MHz ZnO변환기를 이용하여 초음파 현미경을 제작하여, 도미비늘을 화상화하고 광학현미경에 의한 사진과 비교하였다. 그 결과 광학적 반사에 의한 표면의 화상과 초음파의 기계적 탄성적 표면하 반사에 의한 화상에는 다소 차이가 있음을 확인하였다(Fig. 13 및 14). 초음파 현미경은 고체재료 또는 생물조직 상(10(12)등 여러 가지 생물연구 등의 응용이 계획되고 있으며, 특히 초음파 의학의 분야는 그 활용이 눈부실 것으로 예측된다. 초음파 현미경의 제작 그 자체보다, 이것을 도구로 하여 여러 가지 학술적, 기술적 성과가 기대되기 때문에 이 분야의 기초연구가 더욱 중요하게 생각되며 첨단산업분야에서도 비파괴검사 초음파 micro spectroscopy(U.M.S)등과 같은 물질의 탄성적 성질을 micro scale로 계측할 수 있는 등, 많은 활용이 있을 것이 예상된다. 또 초음파 현미경의 방법도 여러 가지이며, 이것을 계측수단으로 일반화하는 문제도 연구할 필요가 있다. 앞으로 광학이나 전자장치 등과 함께 급속한 발전이 기대된다.

• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2013

Polyurethane resin containing isocyanate is marked by excellent tensile and mechanical strengths and this test aims to gauge its applicability as a medical high polymer. Tris [2-(acryloyloxy)ethyl]isocyanurate and hexamethylenediisocyanate were added to a basic mixing ratio of HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (n-vinyl-2-pyrrolidone) and crosslink agent, EGDMA (ethylene glycol dimethacrylate) with increasing proportions and copolymerized respectively. Also, the basic physical properties of the polymerized high polymers including refraction rate, tensile strength, light transmission and water content were measured to confirm that they are appropriate as hydrogelcontact lenses. After measuring the physical properties of high performance polymers produced by adding tris [2-(acryloyloxy) ethyl]isocyanurate, it was found that the average tensile strengths of sample TRIS1 to TRIS10 were between 0.285 and 0.612 kgf, while the average values of refractive index were ranged from 1.441 to 1.449 with water content from 30.00 to 37.35%.The measurement of physical properties of the copolymers generated by adding hexamethylenediisocyanate showed that the average tensile strength of sample HEXA1 to HEXA10 ranged from 0.267 to 1.742 kgf, the refractive index ranged from 1.443 to 1.475 and water contents were in the range of 21.22 to 35.58%. In all combinations the transmission rates satisfied the transmittance of general hydrogel contact lenses. From theresults, it is possible to conclude that the produced copolymers can be used as contact lens materials with excellent tensile strength.

• 한국안광학회지
• /
• 제12권3호
• /
• pp.39-48
• /
• 2007

엄밀한 조절자극과 폭주자극 값 그리고 프리즘 디옵터는 어떻게 정의되어야 하는지를 고찰하여 정리 하였다. 양안시기능 검사와 분석의 실무에서 조절자극과 폭주자극 값은 어떻게 처리되는지를 고찰하여 정리 했다. 그 결과 실무에서의 처리과정은 근거리를 렌즈면으로부터 40 cm로 하는 경우 평균 P.D가 64 mm일 때 안구의 회선점에서 시험렌즈까지 거리 $l_c$이 26.67 mm인 경우에 가장 적합하였다. 본 논문에서 이 값들을 사용하여 필요한 값들을 계산하였다. 그리고 실무에서 사용되는 (5)식의 조절자극 값이 지니는 오차를 눈의 물측 주점에서 시험렌즈까지 거리 $l_H$를 15.07 mm로 하여 계산했다. 굴절력이 $P_m$인 프리즘 가입에 의한 폭주자극 값의 변화량 P'을 순환 계산법으로 계산하였다. P'는 $P_m$, 회선점에서 프리즘까지의 거리 $p_c$, 프리즘을 가입하기 전의 폭주 값 $C_o$와 프리즘 재질의 굴절률 n에 따라 변한다. 그리고 순환 계산법과 필요한 수식들을 자세히 제시했다. P'를 증대시키는 요인에는 두 가지가 있다. 그 첫 번째는 주된 것으로서 폭주 값이 보통의 덧셈법에 따라 더해지지 않는 성질이다. 다른 하나는 영향력이 작은 것으로서 프리즘의 실제 굴절력이 빛의 입사각에 따라 다르게 되는 이유이다. 그리고 $p_c$와 $C_o$가 커짐에 따라 P'은 괄목할 만큼 작아진다. $P_m=20{\Delta}$, P.D=64 mm 그리고 n=1.7인 경우에 대해 $p_c$와 $C_o$값들에 따르는 $P^{\prime}/P_m$을 계산하여 그래프로 나타냈다. $P^{\prime}/P_m$의 굴절률 n에 대한 의존성은 무시 할만 큼 아주 작다(Fig. 6 참조). 가입 프리즘의 굴절력과 폭주자극 값의 변화량이 같게 되는 프리즘의 위치 값 $p_c$를 구했다(Table 1). 실무에서 약식으로 처리되는 조절자극과 폭주자극 값의 참 값을 구하였다. 이를 토대로 약식으로 처리된 조절자극과 폭주자극 값이 참 값의 위치에 표시 되게 하는 두 가지의 그래프 양식을 제시하였다. 하나는 기존의 것과 같은 형태(Fig. 9)이고 다른 하나는 프리즘 가입에 의한 폭주자극 값의 변화량만을 나타내는 형식이다(Fig. 11).

• 한국안광학회지
• /
• 제8권2호
• /
• pp.129-134
• /
• 2003

불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.