• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.136-146
• /
• 1999

The purpose of this study was to estimate the changes of marginal adaptation to the cavity floor of light-cured glass ionomer cement base after application of a composite restoration. Eighty non-carious extracted human molars were used in the present study. Circular cavities were prepared on the center of the exposed dentin surface to 0.5mm, 1.0mm, 1.5mm, 2.0mm in depth and the prepared cavities were pretreated with Dentin conditioner and filled with Fuji II LC(GC Int. Co., Japan). They randomly assigned into 3 groups according to the difference in application of a composite restoration; Group 1(control group): only glass ionomer base, Group 2: The application of a composite restoration surrounded by dentin with class I cavity over glass ionomer base after conventional dentin bonding to the exposed dentin and glass ionomer base, Group 3: The application of composite restoration not-surrounded by dentin over glass ionomer base after conventional dentin bonding to the exposed dentin and glass ionomer base. To examine the interface between cavity floor and light-cured glass ionomer cement base, each groups were sectioned vertically through the center of restorations with diamond saw and the gap size(${\mu}m$) of interface measured by SEM. The results were analyzed by using One Way ANOVA. The results were as follows: 1. Good adaptation between glass ionomer cement base and cavity floor was showed in specimens with 0.5mm, 1.0mm depth base of control group. But in specimens with 1.5mm, 2.0mm depth base of control group, the gap was measured about $15{\mu}m$, $40{\mu}m$ respectively. 2. Gap size in group 2 was significantly higher than that in control group(P<0.05). 3. Gap size in group 3 was significantly higher than that in control group and group 2(P<0.05). 4. It was possible to observe the good adaptation between glass ionomer cement base and dentin which was intermediated with 4-10${\mu}m$ hybrid layer in specimens with 0.5mm, 1.0mm depth base of control group. Cohesive fracture within cement base was observed in all specimens which had the gap between glass ionomer cement base & dentin. 5. It was possible to observe the gap formation between cement base and bonding agent and between composite resin and dentin in all specimens of group 2.

• Restorative Dentistry and Endodontics
• /
• 제39권1호
• /
• pp.24-31
• /
• 2014

Objectives: The purpose of present study was to evaluate the internal adaptation of composite restorations using different adhesive systems. Materials and Methods: Typical class I cavities were prepared in 32 human third molars. The teeth were divided into the following four groups: 3-step etch-and-rinse, 2-step etch-and-rinse, 2-step self-etch and 1-step self-etch system were used. After the dentin adhesives were applied, composite resins were filled and light-cured in two layers. Then, silver nitrate solution was infiltrated, and all of the samples were scanned by micro-CT before and after thermo-mechanical load cycling. For each image, the length to which silver nitrate infiltrated, as a percentage of the whole pulpal floor length, was calculated (%SP). To evaluate the internal adaptation using conventional method, the samples were cut into 3 pieces by two sectioning at an interval of 1 mm in the middle of the cavity and they were dyed with Rhodamine-B. The cross sections of the specimens were examined by stereomicroscope. The lengths of the parts where actual leakage was shown were measured and calculated as a percentage of real leakage (%RP). The values for %SP and %RP were compared. Results: After thermo-mechanical loading, all specimens showed significantly increased %SP compared to before thermo-mechanical loading and 1-step self-etch system had the highest %SP (p < 0.05). There was a tendency for %SP and %RP to show similar microleakage percentage depending on its sectioning. Conclusions: After thermo-mechanical load cycling, there were differences in internal adaptation among the groups using different adhesive systems.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.694-697
• /
• 2000

Laying hens kept in different light and dark periods of the day at high ambient temperature of maximum $35^{\circ}C$ were challenged to $38.5{\pm}0.5^{\circ}C$ acute heat 3 hours daily for 7 consecutive days. They were found to have a significant (p<0.01) acclimatization response (rectal temperature) to heat stress during the dark period compared to those exposed to the same temperature during the light period. The blood pH was not significantly different. The partial pressure of carbon dioxide ($PCO_2$) was significantly high (p<0.01) except in day 4. Similarly the blood bicarbonate ($HCO_3$) concentration was significantly high (p<0.05) except day three and day four. Acute heat exposure in the first day increased the body temperature in both groups (Light and Dark) reaching $44^{\circ}C$, followed by gradual reduction in body temperature. The dark treated birds showed rapid reduction in body temperature ($42.88^{\circ}C$) and adaptation to high temperature during days 2-4 but that this was lost to some extent in days 6-8. However this was not obvious in the light treated birds. It is concluded that darkness reduce hyperthermia and enhance acclimatization responses during acute heat stress.

• 수면정신생리
• /
• 제9권1호
• /
• pp.41-47
• /
• 2002

목 적 : 여러 모의 연구(simulated study)에서 순환제 교대근무자의 야간 근무에 따른 수면장애와 작업수행의 어려움에 대해 광치료가 치료적 도구로 제안되고 있어 실제 순환제 교대 근무 환경에서의 야간 근무 동안 광치료의 효과를 평가하고자 하였다. 방 법 : 연구대상인 5명의 병동 근무 간호사들은 기초평가단계 동안 연속적인 3일간의 낮 근무 후 650 lux의 실내 조명 하에서 연속적인 3일간의 야간근무를 하도록 계획되었으며, 2주 후의 광치료시행단계에서는 동일한 순환주기로 근무하는 동안 자정부터 오전 4시까지 2500 lux의 광박스를 이용한 광치료를 시행하였다. 야간근무 후의 낮수면은 actiwatch를 이용하여 평가되었으며 야간 근무 동안은 스탠포드 졸리움 척도를 이용한 각성상태, 고막체온, STIM을 이용한 수행능력 및 visual analogue를 이용한 우울감, 불안감, 신체적 불편감, 피로감을 기초평가단계와 광치료시행단계 각각에서 야간근무 첫째날과 셋째날을 비교평가하였다. 결 과 : 야간근무 후의 낮 수면은 기초평가단계와 광치료 시행단계 모두 야간 근무 1일째와 3일째에 유의한 차이를 보이지 않았다. 일주기리듬의 위상 변화를 알아보기 위해 측정된 고막 온도는 야간근무 3일째에 기초평가단계에서는 위상전진을 나타낸 반면 광치료시행단계에서는 위상변화가 없었다. 또한, 각성상태, 우울감, 불안감, 피로감, 신체적 불편감, 졸리움 등의 변화도 기초평가단계에서 야간근무 3일째에 유의하게 악화된 반면 광치료시행단계에서는 변화가 없었다. 주의력에서는 광치료시행단계에서만 야간근무 3일째가 1일째에 비해 유의하게 호전되는 양상을 나타내었다. 결 론 : 본 연구는 위약효과를 배제할 수는 없지만, 실제근무 환경에서 단기간의 광치료가 순환제 교대근무자들의 주간 수면의 질을 뚜렷하게 변화시키진 않았으나, 야간 근무동안 졸리움 감소와 주의력 향상을 통한 야간 업무 수행능력의 호전 가능성을 제시해 주고 있다.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.248-259
• /
• 2007

이 실험의 목적은 광중합복합 레진을 자체 제작한 광조사 차단 장치를 이용하여 간헐적 광중합시켜 기존의 연속 중합법과 변연적합도를 비교함으로써 간헐적 광중합의 영향을 알아 보는 것이다. 이번 실험에 사용된 재료는 Pyramid (Bisco, Schaumburg, U.S.A)와 Heliomolar (Ivoclar Vivadent, Liechtenstein)이다. 발치된 상악 소구치에 class II MOD 와동 형성 후 위 두 재료를 bulk 충전하고 다음의 중합cycle에 따라 중합시켰다: 제1군- 연속 광중합 (60초간 계속 광조사); 제2군-2초 광조사, 1초 광차단 (90초 시행); 제3군- 1초 광조사 1초 광차단 (120초 시행); 제4군- 1초 광조사, 2초 광차단 (180초 시행). 저작재현장치 (R&B, Daejeon, Korea)로 720000회의 운동횟수, 분당 120의 회전속도, $5^{\circ}C$와 $55^{\circ}C$의 물을 교대로 치아에 6000회 주사하면서 5.0 kg의 하중을 치아에 적용하였고 실험 전후 변연적합도를 전체와 부위별 변연으로 나누어서 $\times200$배율의 광학 현미경으로 측정하였다. 부위별 변연은 교합면, 인접면, 치은면 등 세 부위로 나누어서 법랑질 변연을 측정하였다. 전체 변연적합도에서 각 군간, 재료간, 저작 운동 전후 차이를 보기 위해 three-way ANOVA와 Duncan's multiple range test를 시행하였고, 부위별 변연적합도에서는 각 군에서 부위별 차이와 각 부위에서 군간 차이를 보기 위해 각각 one-way ANOVA와 Duncan's multiple range test를 시행하였다 (95% 유의수준). 전체 변연적합도를 보면, 저작 운동 전에는 Pyramid의 경우 3, 4군이 1,2군에 비해, Heliomolar의 경우 3.4군이 1군에 비해 전체 변연적합도가 우수하였고, 저작 운동 후에는 Pyramid. Heliomolar모두 3군이 1군에 비해 전체 변연적합도가 우수하였다 (p < 0.05). 재료간 비교에서는 저작 운동 잔에는 2군에서 Heliomolar가 Pyramid보다 변연적합도가 우수하였고 (p < 0.05) 그 외의 군에서는 유의차가 없었으며, 저작 운동 후에는 모든 군에서 재료간 유의차가 없었다. 각 부위별 변연적합도를 비교하면, 저작 운동 전 Pyramid에서는 교합면 변연에서는 4군이 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군 간 유의차를 보이지 않았다. Heliomolar에서는 교합면 변연에서 2, 4군이 1군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. 저작 운동 후 Pyramid에서는 교합면 변연에서는 3군이 1, 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. Heliomolar에서는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.14-23
• /
• 2014

According to the analysis of crosswalk pedestrian accidents, accidents that occur at night represent 70% of all deaths among crosswalk pedestrians when compared to accidents occurring in the daytime. This is due to the poor visibility that hinders drivers to recognize pedestrians at night. Illuminance on the horizontal plane of the road and the current state of crosswalk lighting are not sufficient enough to comply with standards. Thus, we analyzed factors derived from lighting environment studies on improving crosswalk visibility, domestic and foreign crosswalk lighting standards, and subsequently proposed solutions which are needed to raise domestic crosswalk lighting standards, and a means to uphold those standards through proper verification.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.241-244
• /
• 2001

A various color device became generalization. Therefore, request about expression of correct color is increased. Device independent color reproduction system acquires and reproduce color of object regardless characteristic of Input/Output device. Human visual system is partially adapted to the CRT monitor's white point and the ambient light. The visual experiments were performed on the effect of the ambient lighting under mixed chromatic adaptation. In this paper, It was found that human visual system is 40% to 60% adapted to CRT monitor's white point light and the rest to ambient light.

• 대한치과교정학회지
• /
• 제28권6호
• /
• pp.955-974
• /
• 1998

적절한 전단접착강도를 가지면서 법랑질손상과 브라켓파절을 적게 일으키는 브라켓-접착제의 그룹을 찾아내기 위하여 전단접착강도, 법랑질손상, 브라켓탈락양상, 브라켓 주위의 밀봉과 법랑질-접착제-브라켓 사이의 긴밀도를 연구하였다. 교정치료 목적으로 발치한 240개의 치아를 각각 10개씩 24개의 군으로 나누어서 브라켓을 접착한 후 48시간 후에 전단접착강도를 측정하고 브라켓 탈락 양상을 조사하였다. 또한 브라켓 주위의 밀봉과 법랑질-접착제-브라켓 사이의 긴밀도를 평가하기 위하여 브라켓이 접착된 치아를 반으로 자른 후 주사전자현미경상에서 관찰하였다. 6종류의 브라켓과 4종류의 접착제가 사용되었으며 브라켓은 Image, Plastic, Crystaline, Fascination, Transcend, metal bracket을 사용하였으며 접착제로는 No-mix, Light-Bond, OrthoLC, Superbond C&B가 사용되었다. 이와같은 연구로부터 다음과 같은 결론을 내렸다. 1. 전단접착강도는 Fascination-Light Bond 군에서 36.58 Kg(410.07 Kg/$cm^2$)으로 가장 높았으며 Image-OrthoLC 군에 서 8.93 B◎ (75.51 Kg/$cm^2$)으로 가장 낮았다. OrthoLC를 접착제로 사용하였을 때 전단접착강도는 다른 접착제를 사용하였을 때 보다 비교적 낮았다. 2. 접착제의 종류에 관계없이 Fascination bracket의 전단접착강도는 비교적 높았으며 Image, Plastic bracket의 전단접착강도는 비교적 낮았다. Crystaline, Transcend bracket의 전단접착강도는 metal bracket의 전단접착강도와 비슷하거나 낮았다. 3. 전단접착강도와 법랑질 파절, 브라켓 파절은 상관관계가 있었으며, 접착강도가 증가할수록 법랑질 파절과 브라켓 파절은 증가하였다. 4. OrthoLC를 접착제로 사용하였을 때 법랑질 파절과 브라켓 파절은 일어나지 않았으나 Superbond C&B를 접착제로 사용하였을 때는 법랑질 파절과 브라켓 파절의 빈도가 높았다. 5. No-mix, Light-Bond를 접착제로 사용하였을 때 브라켓 주위의 밀봉과 법랑질-접착제-브라켓의 긴밀도는 양호하였다. 접착제의 종류에 관계없이 Ceramic bracket에서 접착제-브라켓의 긴밀도는 양호하였다. 6. 적절한 전단접착강도를 가지면서 법랑질 파절과 브라켓 파절을 일으키지 않는 군은 Crystaline-No mix, Crystaline Light Bond, Crystaline-OrthoLC, metal-No mix, metal-Light Bond, metal-OrthoLC군이였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권4호
• /
• pp.1502-1519
• /
• 2020

Recently, new devices have been developed for the Internet of Things concept. The devices commonly use RF (Radio Frequency) based wireless communication. With the increase in the number of devices, the space allocated for the radio frequency band in wireless communication fills rapidly. Visible Light Communication (VLC) is an alternative, secure and economical communication technology that uses light instead of radio frequencies. While Web of Things (WoT) is the adaptation of the experience and knowledge acquired from the web into the internet of things ecosystems. By combining these two technologies, the development of the Visible Light Communication for Web of Things (VLC4WoT) system, which can use VLC and WoT technologies, has been our motivation. In our study, microcontroller control circuit was created for VLC4WoT system. Control of the circuits over the internet was performed. VLC based receiver and transmitter units have been developed for wireless communication. Web based interface was created for control. The test apparatus consisting of four objects with four outputs and a transfer unit was carried out. In this test, communication was achieved successfully. It was presented in the study that VLC can be used in the web of things architecture. In the future, it is envisaged to use this system as a safe and economical system in indoor environments.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.69-82
• /
• 1992

An experimental investigation of the physical properties of light curing composite resin P-50 was performed, in which an argon ion laser beam was irradiated. The physical and mechanical properties of laser polymerized composite resin were determined by measuring the compressive strength, diametral tensile strength, curing depth and microhardness depending upon the experimental conditions such as the laser irradiation time(10sec, 20sec, 30sec) and laser power(300mW, 500mW, 1000mW). These observations were compared with a conventional visible light curing technique. In addition, to evaluate the marginal adaptation, Class V cavity was prepared on the buccal or lingual surface of the extracted premolar and filled with P-50 light curing resin. The test samples were irradiated with both light sources so that the interface between the restoration and the tooth structure were observed under scanning electron microscope. The most of physical and mechanical properties of the laser cured resin showed a remarkable improvement than those treated with the conventional light source, while the observations with the scanning electron microscope provided no significant difference for two polymerized sources. From the results in the experiment it appears that the potential of an argon ion laser is of important value of the use in the polymerization of composite resin.