• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.679-684
• /
• 1992

New Pd(IV) complexes have been prepared through the reactions of $trans-[Pd(en)_2Cl_2](ClO_4)_2 $(en = ethylenediamine) with Guanine, Adenine, or Uracil anion as purine and pyrimidine base. We identified the ratio of central metal versus ligands by $C{\cdot}H{\cdot}N$ elemental analysis and proposed the coordinating site of the base by infrared spectrum, $^1H-NMR,\; and\; ^{13}C$-NMR spectrum. Guanine or Adenine ligand coordinated at N7 site and an en ligand exchanged for $ClO_4^-$ counter ions of the starting material . As these results, the complexes showed the formula $[Pd(en)L_2(ClO_4)_2](ClO_4)_2{\cdot}(en)$, (L = Guanine, Adenine). But in the Uracil complex no exchange of the en ligand and $ClO_4^-$ occured and Uracil anion preferred the N1 to N3 as coordinating site, the complex $[Pd(en)_2(Urac)_2](ClO_4)_2(Urac = Uracil anion).$

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.33-38
• /
• 2005

The distribution of vanadium and iron ionic species in the presence of picolinate ligand has been simulated at various conditions with different pH values and compositions in the decontamination waste solution. In spite of variations of metal concentration in the decontamination solution, the shape of distribution diagrams were not changed greatly at both high (the molar ratio of picolinate to vanadium is 6) and low (the molar ratio is 3) LOMI decontamination conditions. However, in the solution of low-picolinate condition the shape of the distribution diagram of iron(II)-picolinate complexes was changed significantly. This phenomenon is attributed to the shortage of relative amount of picolinate ligand to iron existed in the solution, and originated from the difference in stability constants for complexes formed between vanadium(III) and iron(II) species with picolinate ligand. The distribution diagrams obtained in this study can be applied very usefully to the prediction or understanding the reaction phenomena occurred at various conditions in the course of the LOMI waste treatments such as an ion exchange operation.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.270-278
• /
• 1996

Response mechanism for the chloride-selective membrane doped with 5, 10, 15, 20-tetraphenyl(porphyrinato)manganase(III) chloride(Mn(TPP)Cl) in PVC/DOS matrix is proposed by examining the visible spectra of the corresponding optode membrane. The visible spectra of Mn(TPP)Cl-doped membrane placed in aqueous solution show that the chloride ligand is easily replaced with water molecule. When other halogen ions, such as $F^-$, $Br^-$ and $I^-$, are added to the sample solution, they replace the water ligand, exhibiting distinctive change in the Soret band of Mn(TPP). On the other hand, bulky anions, such as SCN and salicylate, do not form a bond with the central metal. These results suggests that the potentiometric response of Mn(TPP)-based membrane results either from the ligand exchange (water with halides) at the central metal or from the counter ion exchange (chlorides with bulky lipophilic anions) around the positively charged porphyrin molecule in membrane phase. It was also noted that both hydration enthalpies of anions and their binding constants to Mn(TPP) play critical role in determining the potentiometric selectivity pattern of the membrane.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.471-477
• /
• 1993

The novel macrocylic ligand {(4, 5):(13, 14)-dibenzo-6, 9, 12-trioxa-3, 15, 21, -triazabicyclo [15. 3. 1]heneicosa-(1, 17, 19)(18, 20, 21) triene: HDBPDA} was synthesized, and protonable constants of the ligand and the complex stability constants with alkali metals alkaline earth metals were determined. We evaluated the resolution factor(${\Delta}$) from equation that inducing from stability constants(pK). Also, this ligand was grafted on chloromethylated styrene-divinyl benzene(Merrifield resin) for HDBPDA, ion exchanger. Alkali and alkaline earth metal ions were separated using water by the column chromatography with this ion exchanger. Selectivity(${\alpha}$) and resolution(Rs) of alkali and alkaline earth metal ions were measured from the elution curves chromatogram. The selectivity and resolution values of the various ions calculated from the elution curves were compared with those abtained from pK values. The results were in a good agreement between tow methods. Ion exchange capacity of the resin were determined using the alkali and alkaline earth metal ions and pH dependence of capacity was also discussed.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.661-669
• /
• 2002

The purpose of this research is to absorb and remove sulfur dioxide existing in the air by using ion exchange non-woven fabric. So we found out very appropriate condition of anionic exchange fabric scrubber by measuring amount of SO$_2$ adsorption under the atmosphere that concentration, velocity, and humidity was 100∼200 ppm, 0.6∼1.0 m/sec, and 30∼90 RH%, respectively. Ion exchange capacity of ion exchanger showed the maximum value, 3.75 meq/g at pH 4, and adsorption equilibrium time was the maximum value, 30 h when gas velocity was 0.6 m/sec, moreover, at 80$\^{C}$, adsorption equilibrium time tended to decrease more than 10 h. When concentration was 200 ppm, while reaction speed between SO$_2$ and ligand of fibrous ion exchanger was getting faster, adsorption break point had a tendency to get faster as well. In addition, when relative humidity in the scrubber was 90%, adsorption efficiency was 7.6%/h that seemed to be 30% higher than 4.6%/h coming from the condition that relative humidity had been 30%, and it was totally absorbed under 5 wt% NaOH solution in 5 minutes.

• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.119-123
• /
• 2016

We have studied electronic and magnetic structure of cubane-type Cu magnetic molecule using density functional method. The calculated density of states show that Cu has 3d $x^2-y^2$ hole orbital because of short distances between Cu atom and in-plane 4 ligand atoms. The calculated total energy with in-plane antiferromagnetic spin configuration is lower than those of ferromagnetic configurations. The calculated exchange interaction J between in-plane Cu atoms is much larger than those between out-plane Cu atoms, since the $x^2-y^2$ hole orbital ordering of Cu 3d orbitals induces strong super-exchange interaction between in-plane Cu atoms.

• Journal of the Korean Magnetics Society
• /
• v.25 no.4
• /
• pp.106-110
• /
• 2015

We have studied electronic and magnetic structure of 2 kinds of diiron molecules using OpenMX method based on density functional method. The calculated density of states of diiron-2 is similar with that of diiron-4 because of equal number of 6 ligand atoms. The calculated total energy with antiferromagnetic spin configuration is lower than those of ferromagnetic configurations for both of them. The exchange interaction J of diiiron-4 between $Fe^{+3}$ atoms is one order larger than that of diiron-2, and the calculated J matches well with the experimental one. That comes from the short distance of Fe-O and the high O 2p energy levels. It derives a strong super exchange interaction. The angle of diiron-4 between Fe atoms is bigger than that of diiron-2. It also derives a strong super exchange interaction because of the ${\sigma}$-bond between Fe and O atoms.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.157-167
• /
• 2014

Colloidal quantum dot (CQD) solar cells have attracted great attention due to their cost-effectiveness and solution-processability, as well as their size-dependent optical and electrical properties. The power conversion efficiency of CQD solar cells has rapidly increased up to ~8.6%, which corresponds to the 3 - 4 fold improvement during the last 3 - 4 years. Up to now, there have been many pioneering results in CQD solar cells. Here, we review the recent progress of CQD solar cells including CQD synthesis strategy and device structure engineering.

• Journal of the Korean Magnetic Resonance Society
• /
• v.21 no.4
• /
• pp.135-138
• /
• 2017

Titanium phenoxide and titanium carboxylate derivatives were prepared by ligand exchange of titanium tetraisopropoxide with the corresponding phenol and carboxylic acids. The substitution reactions were analyzed by NMR focused in the liberation of isopropylalcohol. The chemical shift of secondary proton of isopropyl group shifted to upfield after liberation; from 4.47 ppm at titanium-bound to 4.1~4.3 ppm at free alcohol state in $CDCl_3$. The substitution reaction of titanium tetraisopropoxide with carboxylic acid was applied to form dye-Ti complex for dye-sensitized solar cell.

• Journal of Integrative Natural Science
• /
• v.6 no.3
• /
• pp.151-157
• /
• 2013

The ion exchange resins were synthesized from 1-aza-18-crown-6 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous material) divinylbenzene (DVB) copolymer with crosslinks of 1%, 6%, and 15% by substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, surface area, and IR-spectrum. The object of this study was to seperate the metal ion absorbed in reinforcement water fire extinguishing agent. As the results of the effects of pH, equilibrium arrival time, and crosslink of synthetic resin on metal ion adsorption for resin adsorbent, the metal ions were showed high adsorption at pH 3 or over and adsorption equilibrium of metal ions was about 2 hours. In addition, adsorption selectivity for the resin in water was the order of Al (III) > Ni (II) > Sm (III) ions, adsorbability of the metal ions was in the crosslinks order of 1%, 6%, and 15%.