• 한국해양공학회지
• /
• 제25권4호
• /
• pp.48-53
• /
• 2011

Current trends in propeller design have led to the need for extremely complex blade shapes, which place great demands on the accuracy of design and analysis methods. This paper presents a new proposal for improving the prediction of propeller performance with a vortex lattice method using the lifting surface theory. The paper presents a review of the theory and a description of the numerical methods employed. For 8 different propellers, the open water characteristics are calculated and compared with experimental data. The results are in good agreement in the region of a high advanced velocity, but there are differences in the other case. We have corrected the parameters for the trailing wake modeling in this paper, and repeated the calculation. The new calculation results are more in agreement with the experimental data.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.49-65
• /
• 2020

In this study, the effects of inclined shaft angle on the hydro-acoustic performance of cavitating marine propellers are investigated by a numerical method developed before and Brown's empirical formula. The cavitating blades are represented by source and vortex elements. The cavity characteristics of the blades such as cavitation form, cavity volume, cavity length etc., are computed at a given cavitation number and at a set advance coefficient. A lifting surface method is applied for these calculations. The numerical lifting surface method is validated with experimental results of DTMB 4119 model benchmark propeller. After calculation of hydrodynamic characteristics of the cavitating propeller, noise spectrum and overall sound pressure level (OASPL) are computed by Brown's equation. This empirical equation is also validated with another numerical results found in the literature. The effects of inclined shaft angle on thrust coefficient, torque coefficient, efficiency and OASPL values are examined by a parametric study. By modifying the inclination angles of propeller, the thrust, torque, efficiency and OASPL are computed and compared with each other. The influence of the inclined shaft angle on cavity patterns on the blades are also discussed.

• Journal of Ship and Ocean Technology
• /
• 제2권1호
• /
• pp.13-30
• /
• 1998

The design method for trans-cavitating propellers is considered as the combination of super-and sub-cavitating propellers. Especially the design method of the super-cavitating region of the propeller blade is elaborated. A design example is shown. Encouraging test results obtained in the Korea Research Institute of Ship and Ocean (KRISO) cavitation tunnel of a model designed by the present method are discussed.

• 대한조선학회논문집
• /
• 제45권3호
• /
• pp.309-314
• /
• 2008

An experimental method to estimate the added mass of a marine propeller has been developed for the axial rigid body motion in still water, and the experiments have been carried out. The experimental result has been compared to the theoretical result by PRODAS based on the unsteady lifting surface theory. The experimental method developed in this research and the theoretical method by PRODAS have been validated by confirming good agreements between the experimental results and the theoretical ones. Also the comparison to the results by empirical formula has been made and discussed.

• 한국건설관리학회논문집
• /
• 제15권6호
• /
• pp.53-62
• /
• 2014

최근 세계 경제가 금융위기로부터 회복되기 시작하면서 전 세계적으로 초고층 건축공사 프로젝트가 증가하는 추세에 있다. 수직 리프트 양중은 리프트 양중 장비 대수의 제약으로 인해 초고층 건축공사 프로젝트에 있어서 전체 프로젝트의 생산성 측면에서 매우 중요한 요소이다. 특히 건물 높이가 400m 이상 되는 초고층 건축공사에서는, 리프트의 최대 운행높이로 인해 환승운영방식의 리프트 양중이 필수적이다. 환승운영방식 리프트 양중에서의 환승층 지정은 자원들의 양중 시간 단축에 많은 영향을 미친다. 본 연구에서는 AnyLogic 프로그램을 통한 이산사건 시뮬레이션 모델 구축 및 OptQuest 최적화 프로그램을 통한 메타휴리스틱 방식의 최적해 탐색으로 오전 출근시간대의 작업원 양중 시 환승층 최적화를 위한 방법을 제안하였다. 중간층을 환승층으로 지정했을 때와 비교한 결과, 최적 환승층을 지정했을 때 작업자들의 전체 양중시간이 상당히 단축되는 것으로 분석되었다. 본 연구에서 제안하는 도구를 사용 시 초고층 건축공사 프로젝트에서 작업원들의 가용 작업시간 증가를 통한 비용 절감 및 프로젝트 공기 단축이 가능할 것으로 예상된다.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.257-262
• /
• 2011

Purpose: In neurofibromatosis patients, complete surgical excision of the mass is almost impossible and surgical treatment usually consists of multiple serial excisions that only result in a debulking effect. Remnant tumor mass has a gravitational effect on facial soft tissues that leads to sagging of skin and soft tissue, and eventually, facial disfigurement and asymmetry. The purpose of our surgical method is to perform soft tissue lifting with longer lasting effect with less surgical risk of damaging facial nerve and vessels. With external fixation using K-wire or surgical screw, the procedure only called for a short incision length and had additional adhesive properties that enabled anchoring of soft tissue in a lifted position for a longer postoperative period. Methods: A total of 5 neurofibromatosis patients (NF-1) visited our clinic for mass reduction and face lifting. The age of patients ranged from 13 to 42 (mean 28.8 years), and most patients had a long history of multiple excisions in the past. Face lifting was performed in 2 different areas, the periorbital area in 3 patients, and the midface in 2 patients. The materials used in fixation of retaining ligament were K-wire (n=3) and titanium screw (n=2). Results: Follow up period was from 5 month to 3 years and 1 month (mean=2 years and 1 month). All patients conveyed satisfaction with the results and no major complications were reported. The lifting effect lasted for as long as 3 years, and there were no complaints of relapse of soft tissue depression or sagging within the operated area. 1 patient (M/13) needed secondary k-wire insertion and additional mass excision in 1 year and 10 months postoperatively due to tumor growth. In two patients with K-wire fixation, mild dimpling and tenderness were observed in the follow up period, but in about 2 months postoperatively, dimpling was relieved and there was no need for removal of fixating material. Conclusion: Surgical lifting in neurofibromatosis patients can be challenging, for mass excision cannot be done completely and gravitational effect by residual mass can be persistent. External fixation of the retaining ligament in patients with neurofibromatosis can give satisfactory results-for incision length is relatively shorter, and the lifting effect can last longer compared to other various face lifting techniques.

• 한국항공우주학회지
• /
• 제42권4호
• /
• pp.298-304
• /
• 2014

Weissinger의 방법을 기반으로 양력선 방법을 지면효과를 고려한 해석이 가능하도록 확장하였다. 이 방법을 이용하여 가로세로비 10의 타원형 날개와 인간동력항공기 날개에 대해 지면효과에 의한 공력성능 변화를 예측하였다. 날개가 지면에 가까워질수록 날개의 와류강도는 약간 증가하지만 내리흐름은 크게 감소한다. 인간동력항공기 날개의 경우에 날개가 지면에 가까울수록 양력은 증가하여 높이가 2m에서 양력계수는 지면효과를 받지 않을 때보다 5% 증가한다. 유도항력계수는 날개가 지면에서 스팬길이 높이에 있을 때에 지면효과가 없을 때보다 10% 감소하고 높이가 2m이면 55% 감소한다.

• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.8-15
• /
• 2006

A Sparse Point Representation(SPR) based on interpolation wavelets is presented. The SPR is implemented for the purpose of CFD data compression. Unlike conventional wavelet transformation, the SPR relieves computing workload in the similar fashion of lifting scheme that includes splitting and prediction procedures in sequence. However, SPR skips update procedure that is major part of lifting scheme. Data compression can be achieved by proper thresholding method. The advantage of the SPR method is that, by keeping even point physical values, low frequency filtering procedure is omitted and its related unphysical thresholing mechanism can be avoided in reconstruction process. Extra singular feature detection algorithm is implemented for preserving singular features such as shock and vortices. Several numerical tests show the adequacy of SPR for the CFD data. It is also shown that it can be easily extended to nonlinear adaptive wavelets for enhanced feature capturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.198-201
• /
• 1999

An automated storage and retrieval machinery for high rack warehouse systems is developed in order to stack the various kinds of productions. However, according to increase in the rack height, the long lead time should be taken. In stacker crane systems, the variations of the lifting height and the load generate the vibration of lifting machine, and it makes a Position control to be difficult Therefore, the reduction of vibration will be important factor for saving the lead time and the damage of Productions. This paper deals with a position control of stacker crane in automated high rack warehouse system by using a gain-scheduled control algorithm via a LMI method, where the variations of elastic coefficient of the stacker crane's post are considered.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.92-98
• /
• 2006

In this study, the behavior characteristics of a hydrostatic thrust bearing used in hydraulic equipment was analyzed using a commercial finite element program, ADINA. The solid domain was modeled with the fluid domain simultaneously to solve the fully coupled problem, because this is a problem where a fully coupled analysis is needed in order to model the fluid-structure interaction(FSI). The results such as bearing deformation, stress, film thickness and lifting bearing force were obtained through FSI analysis, and then they were compared with the results calculated from the classical method, a single step sequential analysis. It was found that the result difference between two analyses was increased according to the injection pressure. Therefore, in case of high pressure loading, it is desirable to conduct the FSI analysis to examine the deformation characteristics of a hydrostatic slipper bearing.