• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.369-378
• /
• 1996

A Lugged steel wheel was operated with two kinds of travel reduction on a sandy clay. " Small -sized transucers of the three-surfaced lug type " were installed to the wheel for the measurement of normal and tangential forces acting on a trailing lug side, lug face and a leading lug side separately . The external results acting on each surface were calculated from those measured forces. This results proved qualitatively that the relationships between external forces and lug surfaces obtained from mathematical analyses were external forces and lug surfaces obtained from mathematical analyses were correct. The traction, the motion resistance and the dynamic load were changing at the three lug surface under various operating conditions . Therefore, total analyses of three surface were indispensable to discuss the performance of the wheel lug.

• 한국항해항만학회지
• /
• 제32권10호
• /
• pp.759-764
• /
• 2008

활주형선이 수면 위를 활주하여 고속이 가능하기 위해서는 특별하게 설계되어 진다. 대부분의 활주형선은 충격하중을 줄이고 황요, 종요 등의 운동성능을 개선시키기 위하여 스프레이 스트립을 설치하며, 고속에서는 파형개선과 양력발생으로 스프레이저항과 마찰저항이 감소되는 것으로 알려져 있다. 이에, 본 논문에서는 모형시험을 통하여 스프레이 스트립의 부착 유무에 따른 고속 활주형선의 저항특성을 비교, 분석하였으며, 시험결과, 스프레이 스트립 부착 고속 활주형선이 미 부착 선형에 비해서 $3.0{\sim}5.0%$의 저항감소 효과를 확인할 수 있었다.

• 한국운동역학회지
• /
• 제25권3호
• /
• pp.343-351
• /
• 2015

Objective : The purpose of this study was to investigate the effects in the muscle function following 8-week dead-lift training with Whole-body Vibration(WBV) in rehabilitation for sports players. Method : Twenty young sports players. Each subjects were randomly assigned to a resistance training with Whole-body vibration group(TG, n=10), a resistance training without Whole-body vibration group(CG, N=10). The measurements which physical fitness test and joint torque test were performed before the randomization and after the 4-week and 8-week. The WBV group performed the dynamic Dead-lift exercise on a vibration platform during one minute. The CG group performed the equal training without vibration. The WBV and CON group repeated 5 set and trained two times weekly for 8-weeks. Paired t-test was used to test for differences between the groups at baseline and after 4-weeks and 8-Weeks. And independent t-test was used to test for differences between the groups at TG and CG. All analyses were executed using SPSS software 18.0. The level of significance was set at p<.050. Results : Following the 8-Weeks training sessions, an increase in the back-muscle strength was found to be greater for the TG compared with the CG group(p<.05). Muscle endurance was significantly decreased after training than before training only for the CG(p<.05). Isometric Hip/Lumber Extension/Flextion measurement was found to be significantly greater for the TG compared with the CG group(p<.05). The finding indicates that WBV effects as an efficient training stimulus to enhance muscle function by facilitating neural control trail. Following muscle activation in motor unit synchronization of the co-contraction of the muscles. Conclusion : The results imply that the WBV training may have enhanced muscle function in rehabilitation for sports players.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.349-355
• /
• 2014

The resistance test of a high speed craft such as planing ship is performed with a high speed towing carriage instead of ordinary towing carriage because of the speed limitation. In the resistance test using high speed towing carriage, the model ship is fixed to the carriage to restrain the running attitude for enough measuring time. Such method is called fixed model test method. In the fixed model test method, to get the appropriate running attitude, the model test is iteratively repeated until the trim moment and lift force are close to zero. In this research, trim free model test method is investigated to reduce the number of iteration. And, the limitation of towing speed range in the trim free model test method is investigated.

• 동력기계공학회지
• /
• 제20권1호
• /
• pp.24-29
• /
• 2016

Remotely operated vehicles or autonomous underwater vehicles have been used for exploiting seabed natural resources. In this study, the autonomous underwater vehicle of hovering type(HAUV) is developed to observe underwater objects in close distance. A dynamic model with six degrees of freedom is established, capturing the motion characteristics of the HAUV. The equations of motion are generated for the dynamic control simulation of the HAUV. The added mass, drag and lift forces are included in the computer model. Computational fluid dynamics simulation is carried out using this computer model. The drag coefficients are produced from the CFD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.90-92
• /
• 2001

The lift and drag forces on various magnet moving with a velocity is developed above a closed loop coil. These forces are affect by resistance and inductance of circuit, velocity of magnet. To obtain strong magnetic flux density, the magnet is replaced by Halbach array. This paper presents analysis of force between linear motion Halbach array and a closed loop having the constant resistance and inductance as a various speed.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.36-43
• /
• 1996

In this work, a panel method is described, which cart solve the flow field round a surface-piercing body that experiences lift and wave resistance. As the body boundary condition, a Dirichlet type is employed, and as the free surface boundary condition the Poisson type is implemented, while in its discretization Dawson's 4-point upwind difference scheme is utilized, and as the Kutta condition a Morino-Kuo type is chosen. As to the type of singularity, source panels are distributed on the free surface, and source and dipole panels on the body surface, and dipole panels on the wake surface. For a sample run, a catamaran of the parabolic Wigley hull is chosen, for which experimental data are available, and the predictions by the numerical means and by the experiment are compared for a wide range of parameters.

• Journal of Multimedia Information System
• /
• 제7권2호
• /
• pp.189-196
• /
• 2020

We have developed a device for recording biological data by inserting three electrodes and a needle with an angular velocity sensor into the moth for the purpose of measuring the electromyogram of the flapping and the corresponding lift force. With this measurement, it is possible to evaluate the moth-physiological function of moths, and the amount of pesticides that insects are exposed to (currently LD50-based standards), especially the amount of chronic low-concentration exposure, can be reduced the dose. We measured and recorded 2-channel electromyography (EMG) and angular velocity corresponding to pitch angle (pitch-like angle) associated with wing flapping for 100 sweet potato hawkmoths (50 females and 50 males) with the animals suspended and constrained in air. Overall, the angular velocity and amplitude of EMG signals demonstrated high correlation, with a correlation coefficient of R = 0.792. In contrast, the results of analysis performed on the peak-to-peak (PP) EMG intervals, which correspond to the RR intervals of ECG signals, indicated a correlation between ΔF fluctuation and angular velocity of R = 0.379. Thus, the accuracy of the regression curve was relatively poor. Using a DC amplification circuit without capacitive coupling as the EMG amplification circuit, we confirmed that the baseline changes at the gear change point of wing flapping. The following formula gives the lift provided by the wing: angular velocity × thoracic weight - air resistance - (eddy resistance due to turbulence). In future studies, we plan to attach a micro radio transmitter to the moths to gather data on potential energy, kinetic energy, and displacement during free flight for analysis. Such physiological functional evaluations of moths may alleviate damage to insect health due to repeated exposure to multiple agrochemicals and may lead to significant changes in the toxicity standards, which are currently based on LD50 values.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.19-25
• /
• 2018

PURPOSES : This purpose of this study is to analyze the effect to autogenous shrinkage of the top-layer material of a two-lift concrete pavement mixing both silica fume and polymer powder. METHODS : The bottom-layer of a two-lift concrete pavement was paved with original portland cement (OPC) with a 20~23 cm thickness. Additionally, the top-layer which is directly exposed to the environment and vehicles was paved with a high-performance concrete (HPC) with a 7~10 cm thickness. These types of pavements can achieve a long service life by reducing joint damage and increasing the abrasion and scaling resistance. In order to integrate the different bottom and top layer materials, autogenous shrinkage tests were performed in this study according to the mixing ratio of silica fume and polymer powder, which are the admixture of the top-layer material. RESULTS : Autogenous shrinkage decreased when polymer powder was used in the mix. Contrary to this, autogenous shrinkage tended to rise with increasing silica fume content. However, the effects were not significant when small amounts of polymer powder were used (3% and 11%). CONCLUSIONS : The durability and compressive strength increase when silica fume is used in the mix. The flexural strength considerably increases and autogenous shrinkage of concrete decreases when polymer powder is used in the mix. As seen from above, the proper use of these materials improves not only durability, but also autogenous shrinkage, leading to better shrinkage crack control in the concrete.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.228-239
• /
• 2017

This study investigated the drag coefficient and lift coefficient of thirteen kinds of knotless nettings used for large purse seine gear. By comparing the hydrodynamic characteristics with nets of the previous study, the characteristics of this study were derived as a purse seine gear. Thirteen kinds of nettings with different length of bar (l) and diameter (d) were used in the experiment, out of which six kinds used the 30 mm in mesh size and three kinds with 40 mm. The drag coefficient ($C_d$) also increased with increasing d/l. It can be expressed as $C_d=3.71499(d/l)+0.76595$ at a current speed 0.4 m/s and $C_d=4.30324(d/l)+0.69056$ at a current speed 0.5 m/s. Compared with previous studies, drag coefficient values were similar to knotless net of similar d/l and smaller than drag coefficient of knot net. Therefore, using knotless net in a purse seine has the advantage of reducing the resistance acting on the purse seine gear.