• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.677-687
• /
• 2017

Aircraft can often be exposed to a variety of environments and vibrations such as engine, hydraulic pump, aerodynamic force. These may cause cracking and destruction of the mechanical structure and sub-components by high-cycle fatigue. The axial piston type pump which is usually applied to the aircraft hydraulic pump can be necessarily accompanied by the fluid pulsation by continuous rotation of the axial piston. The fatigue crack was identified at the dampener fitting welding zone to prevent vibration damping during the running of aircraft equipped with this type of pulsation hydraulic pump. In order to understand the root cause of this matter, fracture and component analyses were carried out and also integral type dampener fitting was applied to prevent recurrence of the crack as a subject of design improvements. Structural integrity stress analysis, fatigue analysis, qualification test and aircraft system equipped test was conducted to verify the design validity in application to integral type dampener fitting. The test results were sufficiently satisfactory with the demand lifetime of the material from the various types of test as conducted and the subject of design improvement in this study could be objectively evaluated that shall be applied to the operational aircraft.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.683-690
• /
• 2006

Reducing power consumption to extend network lifetime is one of the most important challenges in designing wireless sensor networks. One promising approach to conserving system energy is to keep only a minimal number of sensors active and put others into low-powered sleep mode, while the active sensors can maintain a connected covet set for the target area. The problem of computing such minimum working sensor set is NP-hard. In this paper, a centralized Voronoi tessellation (CVT) based approximate algorithm is proposed to construct the near optimal cover set. When sensor's communication radius is at least twice of its sensing radius, the covet set is connected at the same time; In case of sensor's communication radius is smaller than twice of its sensing radius, a connection scheme is proposed to calculate the assistant nodes needed for constructing the connectivity of the cover set. Finally, the performance of the proposed algorithm is evaluated through theoretical analysis and extensive numerical experiments. Experimental results show that the proposed algorithm outperforms the greedy algorithm in terms of the runtime and the size of the constructed connected cover set.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.169-180
• /
• 2018

White light-emitting diodes (LEDs) are more economical than fluorescent lights, and provide high brightness, a high lifetime expectancy, and greater durability. As LEDs are closely connected with people's daily lives, dimming control of LED is an important component in providing energy savings and improving quality of life. In visible light communications systems using these LEDs, multiple input multiple output (MIMO) technology has attracted a lot of attention, in that it can attain the channel capacity in proportion to the number of antennas. This paper analyzes the power performance of three kinds of modulation in visible light communications (VLC) systems applied space-time block code (STBC) techniques. The modulation schemes are return-to-zero on-off keying (RZ-OOK), variable pulse position modulation (VPPM), and overlapping pulse position modulation (OPPM), and dimming control was applied. The power requirements and power consumption were used as metrics to compare the power efficiency in $2{\times}2$ STBC-VLC environments under the three kinds of modulation. We confirm that dimming control affects the communications performance of each modulation scheme. VPPM showed greater consumption among the three modulations, and OPPM showed energy savings comparable to VPPM.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.156-176
• /
• 1999

Rubber chemicals such as accelerators, antidegradants, vulcanizing agents, processing agents and retarders are very important to the production and protection of tires and rubber goods. The use of accelerators and antidegradants are evaluated in various tire components. This paper will focus on how to vulcanize tires economically and maintain the physical properties of each tire component without severe degradation due to oxygen, heat and ozone. Also, new non-nitrosoamine accelerators and non-staining antiozonants will be discussed. Lastly, the future requirements of antidegradants and accelerators in the tire industry will be reviewed. Tires have been vulcanized with Sulfenamides as primary accelerators and either Guamdine's or Thiurams as secondary accelerators to achieve proper properties at service conditions. However, interior components such as the carcass can be vulcanized with Thiazoles as a primary accelerator to cure faster than the external components. Using the combination of Sulfenamide with secondary accelerators in a tire tread compound and the combination of a Thiazole and Guanidine in a carcass compound will be presented with performance data. Uniroyal Chemical and another Rubber Chemical Manufacturer have developed, "Tetrabenzyl Thiuram Disulfide," (TBzTD) as a non-Nitrosoamine accelerator, which could replace Nitrosoamine generating Thiurams. This new accelerator has been evaluated in a tread compound as a secondary accelerator. Also, Flexsys has developed N-t-butyl-2-benzothiazole Sulfenamide (TBSI) as a non-Nitrosoamine accelerator which could replace 2-(Morpholinothio) -benzothiazole (MBS), a scorch delayed Sulfendamide accelerator. TBSI has been evaluated in a Natural Rubber (NR) belt skim compound vs. MBS. An optimum low rolling resistant cure system has been developed in a NR tread with Dithiomorpholine (DTDM). Also, future requirements for developing accelerators will be discussed such as the replacement of DTDM and other stable crosslink systems. Antidegradants are divided into two different types for use in tire compounds. Internal tire compounds such as apex, carcass, liner, wire breaker, cushion, base tread and bead compounds are protected by antioxidants against degradation from oxygen and heat due to mechanical shear. The external components such as sidewall, chafer and cap tread com-pounds are protected from ozone by antiozonants and waxes. Various kinds of staining and non-staining antioxidants have been evaluated in a tire carcass compound. Also, various para-phenylene diamine antiozonants have been evaluated in a tire sidewall compound to achieve the improved lifetime of the tire. New non-staining antiozonants such as 2, 4, 6-tris-(N-1, 4-dimethylpentyl-p-phenylene diamine) 1, 3, 5 Trizine (D-37) and un-saturated Acetal (AFS) will be discussed in the tire sidewall to achieve better appearance. The future requirements of antidegradants will be presented to improve tire performance such as durability, better appearance and longer lasting tires.

• The Korean Journal of Archival Studies
• /
• no.72
• /
• pp.165-203
• /
• 2022

Many people create records in digital space, and the amount of digital records left after individual dies has increased. The digital record left by the deceased is different from the record heritage that has physical substances. In many cases, the records of the deceased not just belong to the deceased, and many deceased did not explicitly disclose their online accounts and method of dispose of digital records during their lifetime, so this problem may lead to problems of inheritance to the bereaved family. In addition, digital records may be neglected or deleted after a person's death due to software problems, specific platform's terms of use, account deletion by bereaved family, etc. This leads to the problem that daily records, which are important clues to the social aspects at the time, are easily lost. Several studies have revealed that individuals are interested in preserving their digital records, but do not know how to do it, so they are benign neglect. For this reason, it is necessary to pay attention to personal digital records and personal digital legacy, and to prepare related policies and plans. Accordingly, this study analyzes problems related to the management of digital records after an individual's death, related to laws and systems, the status and policies of platforms and industries, the status of personal record management, etc. Various solutions were suggested, such as a need for enactment for digital personal record management act, platform's explicit policy for individual's post-mortem records, digital records management plan for archival institutions, individual's a preemptive management plan for his/her own records, and a method for writing a will related to digital account information.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.109-118
• /
• 2019

Cloud-aerosol interactions are considered to be one of the most important forcing mechanisms in the climate system. However, there is considerable disagreement on the magnitude and even on the sign of how aerosol perturbations affect cloud fraction and lifetime. Furthermore, aerosol effects on clouds and precipitation are not readily separable from the effects of meteorology. This review paper summarizes the study of precipitation susceptibility $S_o$, which qualifies how aerosol perturbations alter the magnitude of the precipitation rate (R) while minimizing the effects of macrophysical factors such as cloud depth (H) and liquid water path (LWP). The analysis shows that the precipitation susceptibility $S_o$ for the warm marine boundary layer clouds is insensitive to aerosol perturbations at low LWP (equivalently low H). However, R decreases as aerosols increase at intermediate LWP. This is because aerosols act as cloud seed and produce numerous small-sized particles, which impede the collision and coalescence process that leads to precipitation. At high LWP, $S_o$ decreases with increasing LWP as there are enough water contents in the clouds. The LWP or H dependent $S_o$ behavior differs depending on the predominant cloud physics processes in the clouds.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.207-221
• /
• 2017

The career management concept is changing rapidly in the career management field in recent years. It becomes very difficult to have a lifetime employment within the same firm. As there is career interruption that is pervasive phenomenon in the women's career management area, many academics and practitioners have been interested in it. The purpose of this study was to examine the influence of women's career-interruptions as the effective career strategy on career development actors and career success. To test the effects of the proactive career management of career-interrupted women, data were divided into two groups including proactive career management group and general career management group based on whether career-interruptions are voluntary or not. The results showed that the proactive development actors was significantly different depending on women's proactive career management and general career management group. First, proactive-career women were more self-directed to learn and have a significant impact on developing skills through training. Second, the career successes were not significantly different depending on and general career management group.

• Proceedings of the Technology Innovation Conference
• /
• 1998.06a
• /
• pp.116-127
• /
• 1998

The Necessity of Cyber University. Within the rapidly changing environment of global economics, the environment of higher education in the universities, also, has been, encountering various changes. Popularization on higher education related to 1lifetime education system, putting emphasis on the productivity of education services and the acquisition of competitiveness through the market of open education, the breakdown of the ivory tower and the Multiversitization of universities, importance of obtaining information in the universities, and cooperation between domestic and oversea universities, industry and educational system must be acquired. Therefore, in order to adequately cope wi th these kinds of rapid changes in the education environment, operating Cyber University by utilizing various information technologies and its fixations such as Internet, E-mail, CD-ROMs, Interact ive Video Networks (Video Conferencing, Video on Demand), TV, Cable etc., which has no time or location limitation, is needed. Using informal ion and telecommunication technologies, especially the Internet is expected to Or ing about many changes in the social, economics and educational area. Among the many changes scholars have predicted, the development and fixations of Distant Learning or Cyber University was the most dominant factor. In the case of U. S. A., Cyber University has already been established and in under operation by the Federate Governments of 13 states. Any other universities (around 500 universities has been opened until1 now), with the help of the government and private citizens have been able to partly operate the Cyber University and is planning on enlarging step-by-step in the future. It could be seen not only as U. S. A. trying to elevate its higher education through their leading information technologies, but also could be seen as their objective in putting efforts on subordinating the culture of the education worldwide. UTRA University in U. S. A., for example, is already exporting its class lectures to China, and Indonesia regions. Influenced by the Cyber University current in the U.S., the Universities in Korea is willing .to arrange various forms of Cyber Universities. In line with this, at JUNAM National University, internet based Cyber University, which has set about its work on July of 1997, is in the state of operating about 100 Cyber Universities. Also, in the case of Hanam University, the Distant Learning classes are at its final stage of being established; this is a link in the rapid speed project of setting an example by the Korean Government. In addition, the department of education has selected 5 universities, including Seoul Cyber Design University for experimentation and is in the stage of strategic operation. Over 100 universities in Korea are speeding up its preparation for operating Cyber University. This form of Distant Learning goes beyond the walls of universities and is in the trend of being diffused in business areas or in various training programs of financial organizations and more. Here, in the hope that this material would some what be of help to other Universities which are preparing for Cyber University, I would 1ike to introduce some general concepts of the components forming Cyber University and Open Education System which has been established by JUNAM University. System of Cyber University could be seen as a general solution offered by tile computer technologies for the management on the students, Lectures On Demand, real hour based and satellite classes, media product ion lab for the production of the multimedia Contents, electronic library, the Groupware enabling exchange of information between students and professors. Arranging general concepts of components in the aspect of Cyber University and Open Education, it would be expressed in the form of the establishment of Cyber University and the service of Open Education as can be seen in the diagram below.

• Health Policy and Management
• /
• v.12 no.3
• /
• pp.1-22
• /
• 2002

Health is a fundamental human right and a sine qua non for happiness of people and for national development. Government has a responsibility for the provision of health services for their people. Recent changes of disease pattern, i.e. decrease of Infectious diseases and increase of chronic and degenerative diseases Including cancer and cardiovascular diseases, together with universal coverage of health insurance and improved living standard have prompted medical care utilization and skyrocketed the national health expenses. The goal of national health policy is improving the quality of life through the betterment of health level. To achieve this goal it is necessary to establish a healthcare system for lifetime, to improve the efficiency of healthcare delivery system, and to strengthen the public health services for disease prevention and health promotion. The current public health service programs are Inefficient due to an inconsistent policy for health service program, lack of health information system, irrational health program planning and evaluation, and Inadequate training of health workers. Local government has a legal responsibility for health service program planning and promoting the competence of health workers. Thus, municipal and provincial health departments should expand their roles and strengthen their function. The strategies for developing public health service programs at local level are ${\circled}1$ stipulating the goals of health policy, ${\circled}2$ promoting the ability for health program planning and evaluation, ${\circled}3$ establishing health information and surveillance system, ${\circled}4$ training of health workers, ${\circled}5$ establishing an institution for health information management and training of health workers, and ${\circled}61$ collaboration with local universities.

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.68-78
• /
• 2020

According to the new climate change agreement, technology development to reduce greenhouse gases is actively conducted worldwide, and research on energy efficiency improvement in the field of power generation and transmission and distribution is underway [1,2]. Economic analysis of the operation method of storing and supplying surplus electricity using energy storage devices, and using energy storage devices as a frequency adjustment reserve power in regional cogeneration plants has been reported as the most profitable operation method [3-7]. Therefore, this study conducted an economic analysis for the installation of energy storage devices in the combined heat and power plant in the Czech Republic. The most important factor in evaluating the economics of battery energy storage devices is the lifespan, and the warranty life is generally 10 to 15 years, based on charging and discharging once a day. For the simulation, the ratio of battery and PCS was designed as 1: 1 and 1: 2. In general, the primary frequency control is designed as 1: 4, but considering the characteristics of the cogeneration plant, it is set at a ratio of up to 1: 2, and the capacity is simulated at 1MW to 10MW and 2MWh to 20MWh according to each ratio. Therefore, life was evaluated based on the number of cycles per year. In the case of installing a battery energy storage system in a combined heat and power plant in the Czech Republic, the payback period of 3MW / 3MWh is more favorable than 5MW / 5MWh, considering the local infrastructure and power market. It is estimated to be about 3 years or 5 years from the simple payback period considering the estimated purchase price without subsidies. If you lower the purchase price by 50%, the purchase cost is an important part of the cost for the entire lifetime, so the payback period is about half as short. It can be, but it is impossible to secure profitability through the economy at the scale of 3MWh and 5MWh. If the price of the electricity market falls by 50%, the payback period will be three years longer in P1 mode and two years longer in P2 and P3 modes.