• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.76-90
• /
• 2006

Sensor network consists of a large number of sensor nodes that are densely deployed either inside the phenomenon or very close to it. The life time of each node in the sensor network significantly affects the life time of whole sensor network. A node which drained out its battery may incur the partition of whole network in some network topology The life time of each node depends on the battery capacity of each node. Therefore if all sensor nodes in the network live evenly long, the life time of the network will be longer. In this paper, we propose Cluster-Based Power-Efficient Routing (CBPER) Protocol which provides scalable and efficient data delivery to multiple mobile sinks. Previous r(luting protocols, such as Directed Diffusion and TTDD, need to flood many control packets to support multiple mobile sinks and many sources, causing nodes to consume their battery. In CBPER, we use the fact that sensor nodes are stationary and location-aware to construct and maintain the permanent grid structure, which makes nodes live longer by reducing the number of the flooding control packets. We have evaluated CBPER performance with TTDD. Our results show that CBPER is more power-efficient routing protocol than TTDD.

• Journal of Family Resource Management and Policy Review
• /
• v.26 no.2
• /
• pp.37-51
• /
• 2022

This study examines the relationship between flexible work and workers' work-life balance using data from the 23rd Korean Labor and Income Panel Study, with a focus on the impact of working from home (WFH) during the COVID-19 pandemic. As a result of the analysis, WFH was found to have a positive effect on the happiness of workers, satisfaction with family relationships, job satisfaction, organizational commitment, and job satisfaction related to job security for women. In addition, we looked at the changes in time use of WFH workers and non-WFH workers before and after COVID-19, with a particular focus on aspects such as time spent sleeping and on self-development, childcare, housework, exercise, and social gatherings. Compared to non-WFH workers, WFH workers increased the time spent on housework and childcare after COVID-19, with this trend more pronounced among women. The results of this study suggest that the effect of utilizing WFH may be halved for workers who have to take care of children and work at the same time, and that this effect may be greater for women. Therefore, it is necessary to strengthen social support measures so that WFH workers who face a work-life conflict due to childcare can maintain work productivity and realize a work-life balance, and to ensure that the flexible work arrangement should not be a medium that reinforces traditional gender roles. Active policy efforts will be required to make sure this happens.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.337-342
• /
• 2011

Medical lift column controlling the vertical position while supporting heavy eccentric load should have the high fatigue strength as well as the extremely low structural deflection and vibration in order to maintain the positioning accuracy. The lift column driven by a induction motor is generally in a three-step sliding boom structure and exhibits the time-varying stress distribution according to the up-and-down motion. This study is concerned with the numerical prediction of the fatigue strength of the lift column subject to the time-varying stress caused by the up-and-down motion. The stress variation during a motion cycle is obtained by finite element analysis and the fatigue life is predicted making use of Palmgren-miner's rule and S-N curves. In order to secure the numerical analysis reliability, a 3-D FEM, model in which the detailed lift column structure and the fitting parts are fully considered, is generated and the interfaces between lift column and pads are treated by the contact condition.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.134-145
• /
• 1996

Since the skid-steer loader is able to work for excavating, lifting and transporting load even at the narrow space, they are widely used in the regular farm and the livestock farm. The skid-steer loader normally adopts the hydrostatic transmission because the power to move the machine backward and forward should be delivered independently on both sides of wheels. Contrast to the mechanical system such as chain and belt transmissions, however, the hydrostatic transmission is less efficient in the use of energy and more difficult in the maintenance. This study was intended to investigate the feasibility of using triangular-type belt clutch and V-belt transmission for the newly developed skid-steer loader in order to overcome the problems stated in the hydrostatic transmission. In the developed triangular-type belt clutch, the centers of driving, driven and idler sheaves are arranged in the triangular shape in a plane, and V-belts were loaded loosely on three sheaves. The power is transmitted by pressing the idler connected to a lever on the loosened V-belt. Contrast to the normal belt clutch using two sheaves, the newly developed belt clutch has the characteristics of small contact-angle of the driving sheave at no bucket load and increasing contact-angle at the time of power transmission. The results of research can be summarized as follows: 1) The developed triangular-type belt clutch adopted a spring-loaded slackside idler which could transmit more power than a fixed idler could by sacrificing the belt life. The life of V-belt used in the power transmission reached at 500 hours(6 months) when the engine power of 11.8 ㎾ was transmitted. Also, it was feasible to develop the large industrial skid-loader with the V-belt transmission by using the proper set of sheaves. 2) The developed skid-steer loader changed the rotating radius and speed with bucket loads as the conventional skid steer loader did. The rotating speed was 47 deg/s at the maximum bucket load of 2.74 kN when the minimum rotating radius was 1.5m. 3) The power required in turning at the bucket load of 2.74 kN was 4 ㎾ and the slippage of V-belt was less than 1%.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.68-75
• /
• 2015

We conducted a thermal compression of domestic Korean pinewood for a use in flooring. For the evaluation of flooring material, we measured dimensional stability and surface hardness of thermally compressed wood. It is possible to make high-specific gravity woods with a range of 0.82-0.92 after the thermal compression with 50% compression set. The surface hardness increased with an increase in the pressing temperature. The highest value of surface hardness was $23.6N/mm^2$, which was obtained from the thermal compressed wood with pressing temperature of $160^{\circ}C$ and 30 minutes of pressing time. However, the surface hardness of woods treated at high temperature of $180^{\circ}C$ or greater decreased. The recovery of thickness decreased with increasing the pressing temperature. For dimensional stability, compression temperature was more dominant than compression time.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.508-517
• /
• 2013

This study aims to analyze the effects of education for persons with disabilities on non-disabled children's attitude to accept disabled children in order to use it as foundational data to practice successful integrated education. According to the study result, education for persons with disabilities positively changed non-disabled children's attitude to accept disabled children's school life and personal life. This plainly shows that education for persons with disabilities is effective regardless of time consumed even with the short time of four weeks here. However, it did not exert positive effects on their attitude to accept social life. Therefore, it is needed to develop education programs for persons with disabilities constantly with various approaches in order to get rid of non-disabled people's wrong recognition on disability and also ignorance about disability.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.144-151
• /
• 2011

Intermittent CSR testing was used to investigate the degradation of a hydrogenated NBR(HNBR) O-rings, and also the prediction of its life-time. The cure system of HNBR O-ring was controlled as sulfur cure and peroxide cure system. An intermittent CSR jig was designed taking into consideration the O-ring's environment under use. The testing allowed observation of the effects of friction, heat loss, and stress relaxation by the Mullins effect. Degradation of O-rings by thermal aging was observed between 100 and $120^{\circ}C$. In the temperature range of $100-120^{\circ}C$, O-rings showed linear degradation behavior and satisfied the Arrhenius relationship. The activation energy of HNBR-S was about 70.6 kJ/mol. From Arrhenius plots, predicted life-times of HNBR-S O-ring were 31.1 years and 33.7 years for 50% and 40% failure conditions, respectively. In case of HNBR-P, the activation energy was about 72.1kJ/mol, and predicted life-times were 34.0 years and 36.5 years for 50% and 40% failure conditions, respectively. The peroxide cure system showed slower degradation rate and higher activation energy than the sulfur cure system.

• Human Ecology Research
• /
• v.58 no.2
• /
• pp.255-266
• /
• 2020

This study observed and investigated the commute time of dual-earner couples from a family developmental perspective. It tested whether the household responsibility hypothesis was effective in explaining the gender gap in the commute time for these couples. I extracted 2,103 time diaries written by 1,266 matched couples from the 2014 Korean Time Use Survey data for this study. The sample was categorized by the age of the eldest child into four age groups of 0-6, 7-12, 13-18, and 19-29. Analytic results from ANOVA, Scheffé test, and OLS regression are as follows. First, husbands traveled longer hours to work than wives in all age groups, while the commute time of couples tended to increase along with the child' age. However, couples in the child group aged 7 to 12 had the shortest commute time. Second, domestic labor time of wives were negatively associated with the commute time, which appeared to support the household responsibility hypothesis. Third, in the child group aged 7 to 12, wives spent more time for work commute as their income increased; however, wives with traditional gender role attitudes had a shorter commute time in the child group aged 0 to 6. Forth, neither the wives' nor husbands' work characteristics were related to the wives' commute time; however, both wives' and husbands' work characteristics were related to the husbands' commute time. The findings suggest the possibility of spatial entrapment by working wives throughout the family life cycle due to household responsibilities, which provides implications for policy intervention in consideration of the gender gap in commute time for dual-earner couples.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.263-271
• /
• 2010

Intermittent CSR testing was used to investigate the degradation of an FKM O-ring, also the prediction of its life-time. An intermittent CSR jig was designed taking into consideration the O-ring's environment under use. The testing allowed observation of the effects of friction, heat loss, and stress relaxation by the Mullins effect. Degradation of O-rings by thermal aging was observed between 60 and $160^{\circ}C$. In the high temperature of range ($100-160^{\circ}C$) O-rings showed linear degradation behavior and satisfied the Arrhenius relationship. The activation energy was about 60.2 kJ/mol. From Arrhenius plots, predicted life-times were 43.3 years and 69.9 years for 50% and 40% failure conditions, respectively. Based on TTS (time-temperature superposition) principle, degradation was observed at $60^{\circ}C$, and could save testing time. Between 60 and $100^{\circ}C$ the activation energy decreased to 48.3 kJ/mol. WLF(William-Landel-Ferry) plot confirmed that O-rings show non-linear degradation behavior under $80^{\circ}C$. The life-time of O-rings predicted by TTS principle was 19.1 years and 25.2 years for each failure condition. The life-time predicted by TTS principle is more conservative than that from the Arrhenius relationship.

• Journal of Hospice and Palliative Care
• /
• v.12 no.4
• /
• pp.177-193
• /
• 2009

The assessment of patient status in palliative medicine is essential for determining treatments and for clinical outcomes. The objective of assessment tools is to raise the quality of care for individual patients and their families. There are a number of tools available to assess pain, non-pain symptoms and quality of life. The tools are either uni-dimensional or multi-dimensional measures. Unfortunately, however, no single tool is recommended to be a superior to others in symptoms or quality of life assessment. Therefore, to select an appropriate assessment tool, one should consider the time frame and unique characteristics of tools depending on purpose and setting. The combination of prognostic index is highly recommended in prognostication, and web-based prognostic tools are available. Recently, a new objective prognostic score has been constructed through multicenter study in Korea. It does not include clinicalestimates of survival, but includes new objective prognostic factors, therefore, anyone can easily use it. For beginners in palliative medicine, relatively easy-to-use tools would be convenient. We recommend Eastern Cooperative Oncology Group performance status to assess functional status, numeric rating scale for pain assessment and the Korean version of brief pain inventory for initial pain assessment. Asking directly with numeric rating scale or the Korean version of MD Anderson Symptom Inventory would be desirable to assess various symptoms together. We think that European Organization Research and Treatment Quality of Life Questionnaire Core 15 for Palliative Care is good to assess the quality of life, while Objective Prognostic Score is convenient as prognostic index for beginners.