• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2008

The study aimed to estimate genetic parameters of body weights in Hanwoo steers using random regression model and compare it with single trait animal model. A total of 1,372 Hanwoo steers that belonged to progeny testing program of the Hanwoo Genetic Improvement conducted at the Livestock Improvement Main Center of the National Agricultural Cooperative Federation (LIMC-NACF) in Rep. of Korea were used. Results of the random regression model fitting quadratic function revealed heritability values from 0.17 to 0.30 for the whole testing days up to 800 days. The results of the animal model showed estimated heritability values ranged from 0.24 to 0.36. Estimates of permanent environmental correlations tended to increase with increasing test in days. Unlike in the direct genetic correlation that at early stage the estimate was slightly negative it was 0.30 then increased to approach unity at later stage of test. Comparing the results between random regression model and the animal model showed not much differences and both followed similar pattern and therefore the use of random regression model for the national genetic evaluation of Hanwoo could be implemented.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.179-184
• /
• 2013

Willingness-to-pay (WTP) for pork produced by quality test was determined using a contingent valuation method. Three model studies including a dichotomous-choice and two double dichotomous-choice types were conducted. The respondents in this study appropriately understood the contingent valuation and the suggested price was significant as a characteristic variable. The results imply that there is lower chance to select pork produced by the quality test, as the price difference is greater between conventional and quality-tested pork. WTPs in double and single contingent valuation models were 735 and 547 won/100 g, respectively. WTP was increased with increasing the educational level of respondents. The average WTPs analyzed by convariate were 1,015 won/100 g for double contingent valuation and 580 won/100 g for single contingent valuation. Considering the minimum price of WTP of pork produced by quality test (547.4 won/100 g), the total economic value was estimated to be 5,173,600 million won and per capita customer value was 106,000 won. Therefore, providing an institutional strategy for pork quality test will be beneficial for the consumers.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.17-26
• /
• 2011

Health care service's added value and sustainability has been formed, through the product developing about sports equipment and special equipment for disabled in order to improve the life quality, with the increasing population of elderly and the attention about health care. This research's design and 3 testing sections has been done according to design process for design development of functional bike. 1st test is done through researching from 4 aspects: structure, aesthetic, function and using. In the 2nd testing, 10 universal design items were used to evaluate 10 modeling samples, and sample F which has high evaluation overall was chosen. In 3rd test, evaluation was done from the user service scene about the mock-up with 1/4 scale size. PPP (product performance program) which is constructed with 60 evaluation items about functional bike's service was tested, and these items were fixed through discussing with experts. Through the result we knew the aesthetic elements had relationship with proportion, unity and typicality. In 10 items (55 survey items), the scores of items with physical exposure's minimization, simple and intuitively usage showed high, on the contrary, the other items' scores was very low, such as information delivery's consideration and thought, failure preventing. The evaluation will be done once more by health care experts, designers and elderly together if the physical model could be made for getting accurate measurement about above test result in the future.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.45-53
• /
• 2011

The effect of the silane coupling agent, bis(triethoxysilypropyl)tetrasulfide (TESPT), on mechanical properties of a silica-filled NBR compound for oilseal was investigated. Curing behavior and crosslinking density of the compounds were measured using ODR (oscillating disk rheometer) and swelling ratio in toluene. UTM (universal testing machine) and shore A hardness tester were used in order to study the characteristics of mechanical properties of original vulcanizates and aged ones with heated air and ASTM No. 3. oil. Recovery of elasticity which influences the performance and service life of oilseal was investigated by giving bending deformation to vulcanizates in aging condition. After bending aging test, recovery distance was measured and calculated angle of recovery from it. TR (temperature retraction) test was performed on these vulcanizates to determine the low temperature recovery behavior. Wear resistance was measured by Taber type abrasion tester. In addition, SEM was used to characterize the morphology of the worn surface of vulcanizates. The result showed that addition of TESPT into silica-filled compound improves not only compound flow-ability, interaction between NBR and silica and crosslinking density, but also hardness, 100% modulus, recovery of elasticity, wear resistance, heat resistance and ASTM No.3 oil resistance of vulcanizates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• The Korean Journal of Blood Transfusion
• /
• v.23 no.2
• /
• pp.162-168
• /
• 2012

Background: Potassium, the most common cation in the intracellular space, plays a critical role in our physiology. Potassium imbalance may cause life-threatening problems, ranging from general weakness to cardiac arrest due to ventricular fibrillation. For emergency physicians, detection of such derangement within a short period of time is of critical importance. In this study, we wanted to determine whether analysis of whole blood samples can be used as a screening tool for potassium imbalance by comparative analysis of whole blood and serum samples. Methods: Two samples were drawn from 227 patients. The whole blood sample was taken from the radial artery and contained in a commercially available arterial blood collection syringe with a lithium-heparin coating. The serum sample was contained in a commercially available vacuum bottle in a non-additive silicone coated tube and transported to the laboratory. The study population was divided into three groups, patients with normal whole blood potassium, patients with decreased whole blood potassium, and patients with elevated whole blood potassium. Potassium levels for each group were coupled with serum potassium levels and compared. Results: No significant difference in potassium values was observed between whole blood and serum samples (P<0.05). Strong associations were observed among the three groups (normal range, hypokalemia, and hyperkalemia group). Compared to the normal group (r=0.851), the hyperkalemia group showed a stronger association between variables (r=0.897), and the hypokalemia group showed a weaker association (r=0.760). Their correlation coefficients were highly significant (P<0.05). Conclusion: Our study illustrates that point-of-care testing using whole blood with whole blood can be a reliable screening tool when treating patients with suspicious potassium abnormality, especially in hyperkalemia patients.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2022

The general non-destructive inspection method for anchor bolts in Korea applies visual inspection and hammering inspection, but it is difficult to check corrosion or fatigue cracks of anchor bolts in the part included in the foundation or in the part where the nut and base plate are installed. In reality, objective investigation is difficult because inspection is affected by the surrounding environment and individual differences, so it is necessary to develop non-destructive inspection technology that can quantitatively estimate these defects. Inspection of the anchor bolts of domestic road facilities is carried out by visual inspection, and since the importance of anchor bolts such as bridge bearings and fall prevention facilities is high, the life span of bridges is extended through preventive maintenance by developing non-destructive testing technology along with existing inspection methods. Through the development of this technology, non-destructive testing of anchor bolts is performed and as a technology capable of preemptive/active maintenance of anchor bolts for road facilities, practical use is urgently needed. In this paper, the possibility of detecting defects in anchor bolts such as corrosion and cracks and reliability were experimentally verified by applying the ultrasonic test among non-destructive inspection techniques. When the technology development is completed, it is expected that it will be possible to realize preemptive/active maintenance of anchor bolts by securing source technology for improving inspection reliability.

• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1280-1289
• /
• 2015

Fish-meat gel is being produced mostly relying on surimi and raw materials imported from Southeast Asia and North America and present in small amount in local markets. In this study, common farmed local fishes were examined as stable and reliable sources of surimi for fish-meat gel production. For testing, five main farmed-fish of Korea, namely; Bastard halibut (Paralichthys olivaceus), Red sea bream (Pagrus major), Korean rockfish (Sebastes schlegeli), Common mulle (Mugil cephalus), and Finespotted flounder (Pleuronichthys cornutus) were used following a traditional washing process. The quality of the surimi was determined by the values of water content, whiteness index, gel strength and impurity. Accordingly, fish-meat gel and surimi quality experiments were carried out by measuring compressive and texture properties, expressible moisture content, Hunter color scale values and SDS-page protein patterns. Also gel characteristics were compared with that of FA and RA grade surimi (Alaska Pollock). Fish-meat gels were prepared by salt mincing the farmed-fish surimi with NaCl (2% w/w) and moisture adjustment to 84% by ice water adding. Prepared fish-meat paste was filled into 20-25 cm long polyvinylidene chloride casings and heated at 90℃ for 20 min. The whiteness values of fish-meat gels produced from surimi were increased by using farmed-fish and became comparable to that of FA Alaska Pollock gel. Among all tested farmed-fish, P. olivaceus and P. major exhibited better properties than RA Alaska Pollock and similar properties to FA Alaska Pollock. Therefore, current data suggests that fish farming can be an efficient and sustainable fish-meat source for fish-meat gel production in Korea.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.3
• /
• pp.43-66
• /
• 2018

The purpose of this study was to conduct the instruction for 'Family Life Planning' based on backward design and measured the learners' understanding and satisfaction for testing validity. In short, the result of this study are as follows: In this study, first of all, the students could explain significant concepts, knowledge, and principles for the planning of family life; they could interpret and apply them; they have perspectives on them; they could empathize them; and they could have self-knowledge. The students could also accomplish high achievements for important concepts related to the field of family life planning. In conclusion, this study showed that the developed instruction was very effective for the students to achieve fruitful results, accelerating the learners' persistent understanding. Second, the learners had high satisfaction on the instruction of Family Life Planning based on backward design with the average score of 3.68 out of the perfect score 4. The students could be satisfied with the developed instruction since they could have high interest in the class thanks to diverse learning materials, and they could take an active part in the learning tasks based on group activities and questions. Also they could apply the contents that they learned through task performances to new situation and context. Therefore, this study proved that the developed instruction enhanced the learners' satisfaction on class.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.27-39
• /
• 2009

Compulsive consumption is regarded as a global phenomenon that can adversely affect consumer well-being. Although the topic has been studied in different cultural settings, we have seen relatively little theory development and explanations of compulsive behavior Nearly all previous empirical studies attempt to explain this behavior by correlating measures of compulsive behavior with independent variables taken within the same time frame. However, recent developments in social sciences suggest that such a phenomenon may best understood in the context of the person's earlier-in-life experiences. Using the life course paradigm as an overarching framework, the present research extends previous work on this topic. Following hypotheses were drawn from literature review: H1: The earlier in childhood and adolescence a person experiences family dislocation, the greater his or her likelihood of exhibiting compulsive behaviors in adulthood. H2: The earlier in life the young person experienced family dislocation, the greater the number of family disruption events the young person experienced prior entering adulthood years. H3: Family dislocation leads to (a) increased frequency of socio.oriented family communications and (b) decreased frequency of concept-oriented family communication. H4: Young adults who were raised in families characterized by a strong socio-oriented communication structure are more likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a weak socio-oriented family communication structure. H5: Young adults who were raised in families characterized by a strong concept-oriented communication structure are less likely to exhibit compulsive consumption tendencies than those who were raised in families characterized by a week concept-oriented family communication structure. H6: The relationship between family disruption events experienced during adolescence and perceived stressfulness of these events is moderated by (a) global family support, (b) emotional family support, and (c) material family support. Those reporting higher levels of family support as teenagers are less likely to report experiencing stress due to family disruption events. H7: Perceived stressfulness of family disruption events experienced during adolescent years are associated with compulsive consumption tendencies in early adulthood. H8: The greater the number of family disruption events young adults experienced during their adolescent years the more frequent was their communication about consumption with their peers. H9: The more frequent was the young persons' communication with their peers about consumption during their adolescent years, the more likely they are to report compulsive buying tendencies as young adults. We use a sample of 120 Thai undergraduate students attending classes taught in English as part of a four-year international program. Product-moment correlations, hierarchical regression analysis and partial correlation were used to analyze data. Results of testing hypotheses showed that hypothesis 2, 4, 7 and 9 were supported and hypothesis 1, 3, 5, 6 and 8 were not supported. Our study did not find a significant relationship between the age when a person experienced family dislocation and their compulsive behavior tendencies expressed as young adults. We did not find a significant relationship between family dislocation and family communication structures. But we found a significant positive relationship between socio-oriented communication structure and compulsive buying and a significant relationship between our peer communication and compulsive buying measures. Also we found perceived stressfulness due to the disruptive events to have a significant positive relationship between the perceived stressfulness and compulsive buying. Implications from these findings, limitations of this research and future research suggestions were discussed.