• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.179-189
• /
• 2021

Plants need essential mineral elements to favorably develop and to complete their life cycle. Despite the irreplaceable roles of microelements, they are often ignored due to the relative importance of macroelements with their influence on crop growth and development. We focused on the changes in primary metabolites in the leaves and roots of bell pepper plants under 6 microelements-deficient conditions: Copper (Cu), Zinc (Zn), Iron (Fe), Manganese (Mn), Boron (B) and Molybdenum (Mo). Bell pepper plants were grown in hydroponic containers, and individual elements were adjusted to 1/10-strength of Hoagland nutrient solution. A remarkable perturbation in the abundance of the primary metabolites was observed for the Fe and B and the Mn and B deficiencies in the leaves and roots, respectively. The metabolites with up-accumulation in the Fe-deficient leaves were glucose, fructose, xylose, glutamine, asparagine and serine. In contrast, the Mn deficiency also resulted in a higher accumulation of glucose, fructose, xylose, galactose, serine, glycine, β-alanine, alanine and valine in the roots. The B deficiency noticeably accumulated alanine, valine and phenylalanine in the roots while it showed a substantial decrease in glucose, fructose and xylose. These results show that the primary metabolism could be seriously disturbed due to a microelement deficiency, and the alteration may be either the specific or adaptive responses of bell pepper plants.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.297-306
• /
• 2021

In this study, basic strategies for the decommissioning and site remediation of the Fukushima Daiichi Nuclear Power Station (FDNPS) were investigated. Six scenarios were formulated based on two of the three decommissioning strategies of nuclear power plants defined by the International Atomic Energy Agency (IAEA): immediate dismantling and deferred dismantling. A multicriteria decision analysis was performed to analyze the preferences of the options from the viewpoints of the timeframe to complete decommissioning, the resulting waste, the site usability, and the availability of the radioactive waste disposal route. The same six scenarios were applied to both the FDNPS and the nuclear power plants that ceased operation after a normal plant life cycle for comparison. For the FDNPS, the decommissioning project involved fuel debris retrieval, dismantling, and site remediation. The analysis results suggest that the balance between the amount of waste and the time to achieve the end state may be one of the most critical factors to consider when planning the decommissioning and site remediation of the FDNPS.

• Korean journal of applied entomology
• /
• v.29 no.2
• /
• pp.104-112
• /
• 1990

Studies were conducted to investigate hosts, life cycle, population dynamics and natural enemies of mulberry scale, Pseudaulacaspis pentagona Ta. & Tozz., from 1987 to 1988 in southern region of Korea. The host plants were 22 families and 74 species. Host plants belonged to genus Prunus in general were severely damaged due to mulberry scale. Mulberry scale was most likely to have three generations a year with first occurrence of larval stage from mid-May to late June, second occurrence from mid-July to mid-August and third occurrence from early September to late October including 3 peaks in early and mid-June, late July and mid-September. In case of each stage occurrence, eggs were peaked on 10th day, larvae on 25th day and adults on 7th day from beginning of occurrence, respectively. Natural enemies were observed as parasitoids of 3 species such as Aphytis diaspidis, Archenomus orientalis and Apterencyrtus mocrophagus and as predators of 3 species such as Chilocorus Kuwanae, Chilocorus rubidus and Hormonia axyridis. Shoot growth was affected by mulberry scale and Lepra to dwindle as much as half of normal growth.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.725-732
• /
• 2014

Phytoremediation is a technology to mitigate the pollutant concentrations such as metals, pesticides, solvents, oils, or others in contaminated water and soils with plants. The plants absorb contaminants through the root and store them in the root, stems, or leaves. Rapid growth trees such as poplar are used to remove low concentrated contaminants eco-friendly and economically in a wide contaminated region. This study was practiced to evaluate an activated carbon production system by using poplar wood discarded after phytoremediation. Life cycle assessment methodology was used to analyze environmental impacts of the system, and the functional unit was one ton of harvested poplar. It was estimated that the small size rotary kiln for activated carbon production from poplar wood had an environmental benefit in optimized conditions to minimize energy consumptions. The results of an avoided environmental impact analysis show that the system contribute to reduce environmental impacts in comparison with activated carbon production from coconut shell.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3571-3580
• /
• 2023

The application of the induction bending process to pipe systems in various industrial fields is increasing. Recently, efforts have also been made to apply this bending process to nuclear power plants because it can innovatively reduce welded parts of the curved pipes, such as elbows. However, there have been no cases of the application of induction bending to the piping of nuclear power plants. In this study, the applicability of the P91 induction bending piping for the sodium-cooled fast reactor PGSFR was validated through high temperature low cycle fatigue tests and creep tests using P91 induction bending pipe specimens. The tests confirmed that the materials sufficiently satisfied the fatigue life and the creep rupture life requirements for P91 steel at 550 ℃ in the ASME B&PV Code, Sec. III, Div. 5. The results show that the effects of heating and bending by the induction bending process on the material properties were not significant and the induction bending process could be applicable to piping system of PGSFR well.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.127-146
• /
• 2013

Torrefaction technologies convert assorted biomass feedstocks into energy-concentrated, carbon neutral fuel that is economically transported and easily ground for blending with fossil coals at numerous power plants around the world without needs to retrofit. Utilization of torrefied biomass in conventional electric generating units may be an increasingly attractive alternative for electricity generation as aging power plants in the world need to be upgraded or improved. This paper examines the economic feasibility of torrefaction in different scenarios by modeling torrefaction plants producing 136,078 t/year (150,000 ton/year) biocoal from wood and corn stover. The utilization of biocoal blends in existing coal-fired power plants is modeled to determine the demand for this fuel in the context of emerging policies regulating emissions from coal in the U.S. setting. Opportunities to co-locate torrefaction facilities adjacent to corn ethanol plants and coal-fired power plants are explored as means to improve economics for collaborating businesses. Life cycle analysis was conducted in parallel to this economic study and was used to determine environmental impacts of converting biomass to biocoal for blending in coal-fired power plants as well as the use of substantial flows of off-gasses produced in the torrefaction process. Sensitivity analysis of the financial rates of return of the different businesses has been performed to measure impacts of different factors, whether input prices, output prices, or policy measures that render costs or rewards for the businesses.

• Journal of The Korean Association of Information Education
• /
• v.17 no.3
• /
• pp.357-365
• /
• 2013

The purpose of this paper is to implement the educational application related to the Plant's Life Cycle Unit in 4th Grade Science Textbook, based on the National Curriculum. This should lead to teachers incorporating them into classes and for students to get practical help when they are studying about plants. Through this application, teachers will be able to experience the so-called Blended Learning while using both off-line and mobile teaching methods. It will also be possible for students to review what they learn during the classes and do their projects regardless of time and place. This type of learning is expected to motivate learners and enhance the learning experience by stimulating the students' interest.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.153-153
• /
• 2010

The world is moving towards a post-carbon society and needs clean and renewable energy for sustainable development. There are many methodological approaches which are helping this shift based on analyzed data about energy resources and which focus on limited types of energy including liquid fossil, solid fossil, gaseous fossil, and biomass (e.g. IPCC Guidelines, ISO 14064-1, WRI Protocol, etc.). We should also consider environmental impact (e.g. greenhouse gas emissions, water use, etc.) and the economic cost of the renewable energy to make a better decision. Recently, researchers have addressed the environmental impact of new technologies which include photovoltaics, wind turbines, hydroelectric power, and biofuel. In this work, we analyze the environmental impact with a carbon emission factor to present a correlation between $CO_2$ emission and the cost of energy resources standardized by the energy output. In addition, we reviewed Life Cycle Assessment (LCA) as another methodology. Researchers who are studying energy systems have ignored the impacts of entire energy systems, e.g. the extraction and processing of fossil fuels. In power sector, the assessment should include extraction, processing, and transportation of fuels, building of power plants, production of electricity, and waste disposal. Therefore LCA could be more suitable tool for energy cost and environmental impact estimation.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1132-1135
• /
• 2008

The sludge grown up in steam generators of nuclear power plants shortens the life-cycle of steam generators and reduces the output of power plants. So KHNP(Korea Hydro and Nuclear Power), the only nuclear power utility in Korea, removes it periodically using a steam generator lancing system during the outage of plants for an overhaul. KEPRI(Korea Electric Power Research Institute) has developed lancing systems with high pressured water nozzle for steam generators of nuclear power plants since 2001. In this paper, the design of a partial inter-tube lancing system for model F type steam generators will be described. The system is actuated without a DC motor inner steam generators because the motors in a steam generator make a trouble from high intensity of radioactivity as a break down.

• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.155-163
• /
• 2005

Heavy duty coating are required to have minimum durable period of 15 years under average usage environment because these paints are coated with purpose of anti-corrosion, antifouling, plastering etc. Onto steel structures constructed upon land and sea and other ferrous structures of electric power generation plants, electricity transmission towers, large structures of various plants, etc. Therefore we tried to estimate heavy duty coating longevity through reliability evaluation method and used combined cyclic anti-conrrosion test method composed of drying, moisturizing and salt spray as for accelerated life test to estimate longevity. Accelerated life test hours to heavy duty coating of first grade (with longevity not less than 15 years) specification may be obtained from troubleless test hours $t_n=\frac{B_p}{n^{1/\beta}}\left[\frac{1n(1-CL)}{1n(1-p)} \right]^{1/\beta}=19.671$ (yr) where shape parameter $\beta=1.1$, confidence level CL=80 %, warranty life $B_{10}=15$ yr and sampling size n=10 (2 sets). Because acceleration factor {AF} found by accelerated test is 41.7, accelerated life test hours required may be represented about 4,132 hr so that if this amount of hours is converted to number of cycles(6 hr/cycle) of complex cycle corrosion resistance test then the amount is tantamount about 690 cycles. That means if there does not occur trouble failure (with defect factor sum not more than 20) during when there is performed 690 cycles of combined cyclic anti-corrosion test to heavy duty coating specimen then it signifies that there can be warranted longevity $B_{10}$ of 15 yr under condition of confidence level CL=80 %.