• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.58-68
• /
• 2009

Low impact development (LID) technique is relatively new concept to reduce surface runoff and pollutant loading from land cover by attempting to match predevelopment condition with various integrated management practices (IMPs). In this study, computational model for designing and evaluating LID, named LIDMOD, was developed based on SCS-CN method and applied at Andong bus terminal to evaluate LID applicapability and design retention/detention area for volume or peak flow control. LIDMOD simulated with 21 years simulation period that yearly surface runoff by post-development without LID was significantly higher than that with LID showing about 2.8 times and LID could reduce efficiently yearly surface runoff with 75% reduction of increased runoff by conventional post development. LIDMOD designed detention area for volume/peak flow control with 20.2% of total area by hybrid design. LID can also efficiently reduce pollutant load from land cover. Pollutant loads from post-development without LID was much higher than those from pre-development with showing 37 times for BOD, 2 times for TN, and 9 times for TP. Pollutant loads from post-development with LID represented about 57% of those without LID. Increasing groundwater recharge reducing cooling and heating fee, creating green refuge at building area can be considered as additional benefits of LID. At the point of reducing runoff and pollutant load, LID might be important technique for Korean TMDL and LIDMOD can be useful tool to calculate unit load for the case of LID application.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.569-578
• /
• 2018

To minimize the negative alterations in hydrologic and water quality environment in urban areas due to urbanization, Low Impact Development (LID) techniques are actively applied. In Korea, LID facilities are classified as Non-point Pollution Reduction Facilities (NPRFs), and therefore they are evaluated using the performance evaluation method for NPRFs. However, while LID facilities are generally installed in small, distributed configuration and mainly work with the infiltration process, the existing NPRFs are installed on a large scale and mainly work with the reservoir process. Therefore, some limitations are expected in assessing both facilities using the same method as they differ in properties. To solve these problems, in this study, a new method for performance evaluation was proposed with focus on bio-retention LID facilities. EPA SWMM was used to reproduce the hydrologic and water quality phenomena in study area, and SWMM-LID module used to simulate TP interception performance by installing a bio-retention cell under various conditions through long-term simulations. Finally, an empirical formula for Load Capture Ratio (LCR) was derived based on storm water interception ratio in the same form as the existing method. Using the existing formula in estimating the LCR is likely to overestimate the performance of interception for non-point pollutants in the extremely low design capacity, and also underestimate it in the moderate and high design capacity.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2010

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.480-480
• /
• 2017

급격한 도시화 및 산업화는 주차장, 건물 및 도로 등 유역의 불투수 면적을 증가시켜 강우에 의한 침수피해 및 비점오염원에 따른 하천의 수질오염을 유발하고 있다. 최근 국내에서는 이러한 문제점을 개선하기 위해 유출저감 시설인 저영향개발 (Low Impact Development, LID)을 도입하여 연구를 진행하고 있다. LID 기술은 우수의 침투 및 저류를 통해 도시화에 따른 영향을 최소화하여 개발 이전의 토지 상태에 최대한 가깝게 만들기 위한 도시개발 기법이다. 대표적인 LID 요소기술로는 옥상녹화, 투수성포장 및 생태저류장치 등이 있으며 도로변, 건물주변, 건물옥상 등에 설치되어 강우유출량과 비점오염물질의 오염부하량을 저감시키는 역할을 한다. 본 연구에서는 안양천에 위치한 가산 1 빗물펌프장 유역에 LID 기법을 적용하였으며, LID 요소기술은 옥상녹화 및 투수성포장으로 선정하였다. LID의 설치위치를 변경하여 적용시키면서 유출지점에서의 우수유출량 및 오염부하량을 산정하고 이를 최대로 저감시킬 수 있는 최적위치를 결정하였다. 최적위치에 LID를 설치하였을 때 우수유출량은 옥상녹화의 경우 약 2.20 %, 투수성포장의 경우 약 2.28 %의 저감효과를 나타내었다. 또한, 오염부하량은 두 가지 경우에서 약 4.74 %의 저감효과를 나타내었다. 최적위치를 결정하는 과정에서 우수유출량과 오염부하량의 저감효과가 서로 독립적으로 거동한다는 것을 확인할 수 있었다. 추후 연구에서는 LID 요소기술을 복합적으로 설치한 경우의 저감효과에 대한 분석이 필요할 것으로 판단된다.

• Environmental Engineering Research
• /
• v.15 no.3
• /
• pp.167-172
• /
• 2010

The effects of low impact development (LID) techniques, such as green roofs and porous pavements, on the runoff and pollutant load from an apartment complex were simulated using the Site Evaluation Tool (SET). The study site was the Olympic Village, a preexisting apartment complex in Seoul, South Korea, which has a high percentage of impervious surfaces (approximately 72% of the total area). Using the SET, the effects of replacing parking lots, sidewalks and driveways (37.5% of the total area) having porous pavements and rooftops (14.5% of the total area) with green roofs were simulated. The simulation results indicated that LID techniques reduced the surface runoff, and peak flow and pollutant load, and increased the evapotranspiration and soil infiltration of precipitation. Per unit area, the green roofs were better than the porous pavements at reducing the surface runoff and pollutant loads, while the porous pavements were better than green roofs at enhancing the infiltration to soil. This study showed that LID methods can be useful for urban stormwater management and that the SET is a useful tool for evaluating the effects of LID on urban hydrology and pollutant loads from various land covers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.209-209
• /
• 2020

환경부 자료에 따르면 1990년대부터 2000년대 후반까지 국내의 도시면적은 696,239㎢ 증가했다. 도시지역에서의 불투수면적이 차지하는 비율은 25% ~ 80%로 적지 않은 비율을 차지한다. 따라서 도시면적이 증가하면 이는 불투수면적의 증가로 이어지며 이로인한 지표유출로 오염물질의 유입이 늘어나게 되면, 수질오염중 비점오염원이 차지하는 비중의 증가한다. 비점오염원으로 인해 발생하는 환경문제를 해결하기 위해 LID(Low Impact Develpment)시설에 대한 연구가 많이 진행되었다. 본 연구에서는 7년간의 선행 연구결과를 바탕으로 LID 시설별 오염물질 저감효율을 비교분석하였다. 용인 삼계리에 위치한 식생수로 오염지표들의 유입, 유출EMC를 토대로 제거 효율에 대한 평가를 해보면 TSS는 46%, BOD는 48%, COD는 56%. TN은 42% 그리고 TP는 58%가 나왔다. 용인 해곡동에 위치한 식생여과대의 경우 TSS는 83%, BOD는 45%, COD는 43%, TN은 39%, 그리고 TP는 62%가 나왔다. 마지막으로 전주에 위치한 식생체류지의 경우 TSS는 100%, BOD는 75%, TOC는 62%, TN은 67% 그리고 TP는 83%가 나왔다. 이들 자료를 바탕으로 효율성 평가를 해보면 먼저 식생수로의 경우 TP 저감 효율이 58%로 가장 높았으며 TN 저감 효율이 42%로 가장 낮았다. 식생여과대의 경우 TSS 저감 효율이 83%로 가장 높았으며 TN 저감 효율이 39%로 가장 낮았다. 마지막으로 식생체류지의 경우 TSS 저감 효율이 100%에 가까운 양질의 제거효율을 보여주었으며, TOC의 경우 67%로 제일 낮은 제거효율을 보였다. 위 결과를 토대로 판단을 해보면 식생체류지가 전반적으로 좋은 지표를 보였으며 대부분의 상황에 양호한 제거효율을 기대할 수 있다고 생각된다. 식생 LID시설은 자연친화적이며 강우유출과 오염물질을 제거할 수 있다는 장점이 있는 반면, 장치형 LID시설에 비해 넓은 부지면적을 필요로 하므로 설치 지역의 특성에 맞게 LID 시설을 시공하는것이 적절하다고 판단된다. 해당 연구결과는 향후 식생형 LID시설을 설계하는데 있어서 기초자료로 반영될 것으로 기대된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.795-802
• /
• 2013

According to the increase of impervious area due to the town development, the rate of infiltration generally lessens and that of runoff rises during wet weather events. And it is concerned that its impacts on water quality for the downstream water bodies due to the change of rainfall runoff patterns may also increase. To cope with these issues, LID (Low Impact Development) techniques which try to maintain the characteristics of rainfall runoff regardless of the town development have been introduced actively. However, the behaviors of each LID technique for rainfall runoff and pollutant loads is not understood sufficiently. In this study, considering the applications of some LID techniques, several sets of simulations using a distributed rainfall runoff model, SWMM-LID, have been conducted for D town whose development is progressing. As the results of the simulations, the rates of infiltration/storage have been decreased from 78% in the case before the town development to 15% after the development and increased again by 24% with LID techniques such as porous pavement, rain barrel and rain garden. The rates of runoff have been increased more than three times from 20% in the case before the development to 74% after the development, and they have also been decreased to 66% by the adoption of LID techniques. It has been simulated that porous pavement is more effective than others in the view point of the reduction of runoff and rain barrel is more attractive for the management of pollutant loads (TSS, BOD, COD, T-N and T-P). Therefore, if some LID techniques should be selected for the a new town, it could be concluded that some techniques with better infiltration functions are recommendable for the control of runoff, and ones with larger storage functions for the management of pollutant loads.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.495-504
• /
• 2012

In recent years, urbanization has been a hot issues in watershed management due to increased pollutant loads from impervious urban areas. The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and water quality studies at watershed scale. However, the SWAT has limitations in simulating water flows between HRUs and hydrological effects of LID practices. The Storm Water Management Model (SWMM) has LID capabilities, but it does not simulate non-urban areas, especially agricultural areas. In this study, a SWAT-SWMM coupled model was developed to evaluate effects of LID practices on hydrology and water quality at mixed-landuse watersheds. This coupled SWAT-SWMM was evaluated by comparing calibrated flow with and without coupled SWAT-SWMM. As a result of this study, the $R^2$ and NSE values with SWAT are 0.951 and 0.937 for calibration period, and 0.882 and 0.875 for validation period, respectively. the $R^2$ and NSE values with SWAT-SWMM are 0.877 and 0.880 for validation period. Out of four LID scenarios simulated by SWAT-SWMM model, the green roof scenario was found to be most effective which reduces about 25% of rainfall-runoff flows.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1193-1207
• /
• 2013

Increase of impervious area caused by overdevelopment has led to increase of runoff and then the problem of flooding and NPS were brought up. In addition, as decrease of base flow made groundwater level to decline, a stream that dries up is issued. low impact development (LID) method which is possible to mimic hydrological water cycle, minimize the effect of development, and improve water cycle structure is proposed as an alternative. As introduction of LID in domestic increases, the study on small watershed is in process mainly. Also, analysis of property of hydrological runoff and load on midsize watershed, like sewage treatment district, is required, the study on it is still insufficient. So, area applying LID practices from watershed of Dongrae stream is pinpointed and made the ratio and then expand it to watershed of Oncheon stream. Among low impact development practices, Green Roof, Porous Pavement, and Bio- retention are selected for the application considering domestic situations and simulated with SWMM-LID model of each watershed and improvement of water cycle and reduction of non-point pollution loads was analysed. Improvement of water cycle and reduction of non-point pollution loads were analyzed including the property of rainfall and soil over long term simulation. The model was executed according to scenario based on combination of LID as changing conductivity in accordance with soil type of the watershed. Also, this study evaluated area of LID application that meets the efficiency of conventional management as a criteria for area of LID practices applying to sewer treatment district by comparing the efficiency of LID application with that of conventional method.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2022

LID technologies are capable of mitigating the negative impacts of non-point source (NPS) pollution generated in different land uses. Apart from the increase in point and non-point pollutant generation, highly developed and paved areas generally affect microclimate conditions. This study evaluated both the efficiency of Low Impact Development (LID) facilities in treating NPS pollutant loads as well as the unit pollutant loads (UPL) generated in various urban features (such as parking lots and highways). This investigation also looked at how LID technology helped to alleviate Urban Heat Island (UHI) conditions. As compared to the typical unit pollutant loads in South Korea, the unit pollutant loads at Kongju National University were relatively low, because of no classes, limited vehicular transmission, and low anthropogenic activities during vacation. After receiving treatment from the LID facilities, the effluent pollutant loads were significantly decreased. The sedimentation in filtration mechanisms considerably reduced the pollutant fractions in the influent. Additionally, it was shown that LID facilities' mean surface temperatures are up to 7.2℃ lower than the nearby paved environment, demonstrating the LID systems reducing the UHI impact on an urban area.