LIDMOD2 Development for Evaluation of LID/BMPs

LID/BMPs 효과분석을 위한 LIDMOD2 개발

  • Jeon, Ji-Hong (Department of Environmental Engineering, Andong National University) ;
  • Choi, Donghyuk (Department of Environmental Engineering, Andong National University) ;
  • Na, Eun Hye (Water Environmental Research Department, National Institute of Enviornmental Research) ;
  • Park, Chan-Gi (Department of Rural Construction Engineering, Kongju National University) ;
  • Kim, Tae-Dong (Department of Environmental Engineering, Andong National University)
  • 전지홍 (국립안동대학교 환경공학과) ;
  • 최동혁 (국립안동대학교 환경공학과) ;
  • 나은혜 (국립환경과학원 물환경연구부) ;
  • 박찬기 (국립공주대학교 지역건설공학과) ;
  • 김태동 (국립안동대학교 환경공학과)
  • Received : 2009.11.03
  • Accepted : 2010.02.18
  • Published : 2010.05.30

Abstract

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

Keywords

References

  1. 국립환경과학원(2008). 제2단계 수계오염총량관리기술지침. 국립환경과학원.
  2. 김이형(2008). 21세기 친환경 건설을 위한 low impact development(LID) 기술. 한국수자원학회지, 41(6), pp. 47-57.
  3. 김태동, 최동혁, 전지홍(2009). 비점오염원 최적관리방안 적용에 따른 저감효과 평가. 한국환경정책평가연구원.
  4. 박준호, 유용구, 박영곤, 윤희택, 김종건, 박윤식, 전지홍, 임경재(2008). SWMM을 이용한 춘천 거두 1지구의 LID 개념 적용으로 인한 유출 감소 특성 분석. 수질보전 한국물환경학회지, 24(6), pp. 806-816.
  5. 이정한(2007). 우리나라 강우의 권역별 대표확률분포형 결정에 관한 연구. 석사학위논문, 금오공과대 산업대학원.
  6. 전지홍, 최동혁, 김태동(2009a). 지속가능한 도시개발을 위한 LID평가모델(LIDMOD)개발과 수질오염총량제에 대한 적용성 평가. 수질보전 한국물환경학회지, 25(1), pp. 58-68.
  7. 전지홍, 최동혁, 김정진, 김태동(2009b). LID-IMPs 선정 가이드라인 제시와 아파트단지에서의 LID 설계. 수질보전 한국물환경학회지, 25(6), pp. 886-895.
  8. 전지홍, 최동혁, 김정진, 김태동(2009c). SCE-UA 최적화기법에 의한 낙동강 유역의 CN값 도출. 수질보전 한국물환경학회지, 25(2), pp. 245-255.
  9. 최지용(2004). 유역관리 효율화를 위한 불투수면 지표 개발과 적용. 한국환경정책평가연구원.
  10. 토지주택연구원(2009). 미기후 향상을 위한 빗물관리계획.
  11. 현경학(2008). 물순환 신도시 조성을 위한 Low Impact Development: 빗물관리시설 및 인공습지. 한국지반환경공학회지, 9(2), pp. 30-37.
  12. Department of Defense (2004). Unified Facilities Criteria (UFC): Low Impacte Development. UFC 3-210-10. Department of Defense, USA.
  13. Prince George's County (1999). Low-impact development hydrologic analysis. Prince George's County, MD Department of Environmental Resources.
  14. Tetra Tech. INC. (2005a). Upper Neuse Site Evaluation Tool: Model Documentation. Tetra Tech. INC., USA.
  15. Tetra Tech. INC. (2005b). Upper Neuse Site Evaluation Tool: User's Manual and Guidance. Tetra Tech. INC., USA.