• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.105-118
• /
• 2015

The purpose of this study was to give a suggestion for vitalizing rural area's community, with respect to the components of community; 'locality' and 'communality'. The survey was conducted at Hondong, Hodongseong-gun, Chungcheongnam-do, which was a representative area for active rural area community. For the survey, we interviewed an activist on the village in November $9^{th}$, 2014, and let 81 residents fill the questionnaires during March $7^{th}$ to $14^{th}$, 2015. Major findings were as follows. 1) As for the 'locality' factor, the motives of residents' immigration were influenced by the availability of facilities for agriculture education, living, and convenience in the area. Most of residents recognized that the area comprises their own community facility area and expanded area with concentrated facilities of 'li', minimal adminstration unit. It means that their usage pattern of community facilities influences their conceptions of the village. 2) As for the 'communality' factor, original residents and immigrant back-to-farm residents showed different pattern in communicating with neighbors and community facility usages. Residents communicated with neighbors by meeting up or using the concentrated facilities in Gatgol, and visited the Balmak library frequently. Residents' sense of belonging was high with mean 4.16 point of 5.0 in Likert scale.

• Journal of Radiation Protection and Research
• /
• v.6 no.1
• /
• pp.8-24
• /
• 1981

This paper presents flux-to-dose-rate conversion factors for neutrons and gamma rays based on the American National Standard Institute(ANSI) N666. These data are used to calculated the dose rate distribution of neutron and gamma ray in radiation fields. Neutron flux-to-dose-rate conversion factors for energies from $2.5{\times}10^{-8}$ to 20 MeV are presented; the corresponding energy range for gamma rays is 0.01 to 15 MeV. Flux-to-dose-rate conversion factors were calculated, under the assumption that radiation energy distribution has nonlinearity in the phantom, have different meaning from those values obtained by monoetiergetic radiation. Especially, these values were determined with the cross section library. The flux-to-dose-rate conversion factors obtained in this work were in a good agreement to the values presented by ANSI. Those data will be a useful for the radiation shielding analysis and the radiation dosimetry in the case of continuous energy distributions.

• YAKHAK HOEJI
• /
• v.31 no.2
• /
• pp.116-125
• /
• 1987

It is still difficult and time consuming to obtain cDNA sequences that contain the entire nucleotide sequence of the corresponding mRNA. A rapid and high efficient cloning method to obtain full-length cDNA segments is thus developed. The cloning procedure described here consists of the construction of oligo(dT)-tailed vector primer using pWR34 plasmid, polyadenylation of mRNA-cDNA heteroduplex using terminal deoxytransferase, and replacement of MRNA strand with DNA by RNase H and DNA polymerase I. The restriction endonuclease analysis shows that the size of inserted-cDNA is in the range of 1.5~4.0 kb long suggesting that most of cloned cDNA are full-length or nearly full-length cDNA. The plasmid-DNA recombinants obtained were 4$\times$$10^5$~$10^{6}$ per $\mu\textrm{g}$ of rat liver poly (A$^+$)mRNA, which is 4 to 10 fold higher cloning efficiency in comparison to the presently used methods for full-length cDNA cloning. The results indicate that the described cloning system is much simpler, less time consuming, and very efficient cloning method to construct a cDNA library.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1443-1450
• /
• 2004

The clustering characteristics for a number of classes, and defining the inheritance relations between the classes is a difficult and complex problem in an early stage of object oriented software development. We discuss a traditional iterative approach for the reuse of the existing classes in a library and an integrated approach to creating a number of new classes presented in this study. This paper formulates a character-istic clustering problem for zero-one integer programming and presents a network solution method with illustrative examples and the basic rules to define the inheritance relations between the classes. The network solution method for a characteristic clustering problem is based on a distance parameter between every pair of objects with characteristics. We apply the approach to a real problem taken from industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.399-408
• /
• 2012

The overall goal of this study was to characterize and quantify ammonia-oxidizing bacteria (AOB) in four different full-scale sequence batch reactor (SBR) wastewater treatment plants. Also, this study focused on assessing the occurrence of the alternative ammonia-oxidizing microbes such as anammox (anaerobic ammonia oxidation) bacteria (AMX) and ammonia-oxidizing archaea (AOA) in these systems. Based on total AOB numbers and the estimated cell density in the mixed liquor samples, AOB constituted 0.3 - 1.8% of the total bacterial population in the four WWTPs. Based on clone library, Nitrosomonas ureae-like AOB were dominant in plant A and B, while plant C and D had Nitrosomonas nitrosa-like AOB as major AOB group. The four different AMX primer sets targeting AMX 16S rRNA gene produced PCR amplicons distantly related to Chlamydia and Planctomycetales group bacteria. However, it was not clear these groups of bacteria perform anammox reaction in the SBR plants. Also, molecular evidence of AOA was found in one of the SBR plants, with a sequence located in the deep branch of the sediment creanarchaeota group.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1201-1207
• /
• 2006

In this paper, we say the adaptive shading correction system supporting multi-resolution for mobile camera. The shading effect is caused by non-uniform illumination, non-uniform camera sensitivity, or even dirt and dust on glass (lens) surfaces. In general this shading effect is undesirable [1-3]. Eliminating it is frequently necessary for subsequent processing and especially when quantitative microscopy is the fine goal. The proposed system is available on thirty nine kinds of image resolutions scanned by interlaced and progressive type. Moreover, the system is using forty kinds of continuous quadratic equations instead of using the piece-wise linear curve which is composed of multiple line segments. Finally, the system could correct the shading effect without discontinuity in any image resolution. The proposed system is implemented in VLSI with cell library based on Hynix $0.25{\mu}m$ CMOS technology.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.185-189
• /
• 2005

This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.225-229
• /
• 2001

In Korea, an advanced reactor system of 330MWt power called SMART (System integrated Modular Advanced ReacTor) is being developed by KAERI to supply energy for seawater desalination as well as electricity generation. A shielding design of the SMART core with 49 CEDM is established by a two-dimensional discrete ordinates radiation transport analyses. The DORT two-dimensional discrete ordinates transport code is used to evaluate the SMART shielding designs. Three axial regions represent the SMART reactor assembly, each of which is modeled in the R-Z geometry. The BUGLE-96 library is used in the analyses, which consists of 47 neutron and 20 gamma energy groups. The results indicate that the maximum neutron fluence at the bottom of reactor vessel is $5.89 {\times} 10^{17}\;n/cm^2$ and that on the radial surface of reactor vessel is $4.49 {\times} 10^[16}\;n/cm^2$. These results meet the requirement, $1.0 {\times} 10^{20}\;n/cm^2$, in 10 CFR 50.61 and the integrity of SMART reactor vessel during the lifetime of the reactor is confirmed.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.57.2-57.2
• /
• 2017

Remote and robotic telescopes are the most effective instrument for astronomical survey projects. The system is based on the dynamic operation of all astronomical instruments such as dome and telescope control system (TCS), focuser, filter wheel and data taking camera. We adopt the ASCOM driver platform to control the instruments through the integrated software. It can convert different interface libraries from various manufacturers into a uniform standard library. This allows us to effectively control astronomical instruments without modifying codes. We suggest a conceptual design of software for automation of a small telescope such as the new wide-field 0.25m telescope at McDonald Observatory. It can also be applied to operation of multi-telescopes in future projects.