• 품질경영학회지
• /
• 제29권1호
• /
• pp.24-40
• /
• 2001

Response surface designs can be classified, according to the shape of the experimental region, into spherical designs and cuboidal designs. Among the central composite design(CCD)s and the Box-Behnken design(BBD)s that are popular in practice, when the number of factors is k, spherical designs are tile CCDs with the axial value being $\sqrt{\textit{k}}$ and the BBDs, and cuboidal designs are the CCDs with the axial value being 1. With the CCDs having $\sqrt{\textit{k}}$ as the axial value, the radius of the experimental region varies with number of factors, but these designs are the 5-level designs. With the BBDs that are 3-level designs, the radius of the experimental region does not vary with the number of factors. In this article, we propose tile 3-level spherical designs which are constructed so that tile radius of the experimental region varies with the number of factors.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.296-309
• /
• 2009

Thick-walled cylinder with high pressure have had wide application in the armament industry. In the thick-walled cylinder, fatigue crack is generated at inner radius and developed toward the outer radius. To prevent generation of fatigue crack, the autofrettage process had been used. The compressive residual stress induced by the autofrettage process extends loading pressure and fatigue life of the thick-walled cylinder. In this study, the residual stress of single and compound cylinder by the autofrettage process was evaluated. The analytical compressive residual stress of single cylinder was good agreement with experimental result at inner radius. The analysis on the residual stress of compound cylinder was conducted. The compressive residual stress at inner radius was increased with the overstrain level. And fatigue life of the compound cylinder with initial crack was evaluated. The considered initial crack shape was straight and semi-elliptical. The fatigue life was extended with the overstrain level. The fatigue life of the compound cylinder with semi-elliptical crack was longer than straight crack. The suitable way to extend fatigue life of the compound cylinder was proposed.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1093-1100
• /
• 2004

Numerical analysis of the heat transfer associated with droplet impact on a hot solid surface is performed by solving the equations governing conservation of mass, momentum and energy in the liquid and gas phases. The deformed droplet shape is tracked by a level set method which is modified to achieve volume conservation and to include the effect of contact angle at the wall. The numerical method is validated through the calculations for the cases reported in the literature. Based on the numerical results, the heat transfer rate is found to depend strongly on the droplet spread radius. Decreased advancing/receding contact angles enlarge the splat radius and in turn enhance the wall heat flux. The effect of impact velocity on the droplet spread is reduced as the droplet size decreases. Also, droplet atomization is observed to significantly enhance the heat transfer rate and the effect is pronounced for a smaller size of droplet. An existing model equation to predict the maximum spread radius is improved for application to a micro droplet.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.69-73
• /
• 2001

Damage induced by low-velocity impact on the curved composite laminates was experimentally evaluated for CFRP cylindrical shells with the radius of curvatures of 50, 150, 300, and 500 mm. The result was then compared with that of flat laminates. The radius of curvatures and the effective shell stiffness appeared to considerably affect the dynamic impact response of curved shells. Under the same impact energy level, the maximum contact force increased with the decreasing radius of curvatures, with reaching 1.5 times that for plates at the radius of curvature of 50 mm. Since the maximum contact force is directly related to the impact damage, curved laminates can be more susceptible to delamination and less resistant to the low-velocity impact damage. The distribution of delamination along the thickness direction of curved laminates are also different from that of flat plates. Delamination was distributed rather even]y at each interface along the thickness direction of curved laminates. This implies that the effect of curvatures has to be considered for the design of a curved composite laminate.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.97-110
• /
• 2021

Fog can cause large-scale human and economic damages, including traffic systems and agriculture. So, Korea Meteorological Administration is operating about 290 visibility meters to improve the observation level of fog. However, it is still insufficient to detect very localized fog. In this study, high-resolution grid-type visibility data were retrieved from irregularly distributed visibility data across the country. To this end, three objective analysis techniques (Inverse Distance Weighting (IDW), Ordinary Kriging (OK) and Universal Kriging (UK)) were used. To find the best method and parameters, sensitivity test was performed for the effective radius, power parameter and variogram model that affect the level of objective analysis. Also, the effect of data distribution characteristics (level of normality) on the performance level of objective analysis was evaluated. IDW showed a relatively high level of objective analysis in terms of bias, RMSE and correlation, and the performance is inversely proportional to the effective radius and power parameter. However, the two Krigings showed relatively low level of objective analysis, in particular, greatly weakened the variability of the variables, although the level of output was different depending on the variogram model used. As the level of objective analysis is greatly influenced by the distribution characteristics of data, power, and models used, care should be taken when selecting objective analysis techniques and parameters.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.57-63
• /
• 2011

It is very important to determine link composition of a crane in the basic design of the crane. There are many parameters in the design for the link composition of a double link type level luffing jib crane. We analyze the variation of link composition according to the variation of these parameters which are the angle of fixed link, the angle between the fixed link and backstay when the position of the crane is the maximum working radius, the ratio of fly jib length between two moving hinges to the total length of fly jib, the length of backstay, and the slewing radius. In this paper, we describe the application of the previous analysis program of the link composition design for a double link type level luffing jib crane.

• 융합보안논문지
• /
• 제13권6호
• /
• pp.69-76
• /
• 2013

무선 센서 네트워크에서 에너지 효율성을 높이려는 연구가 많이 진행되어 왔다. 그러나 현재 이루어지고 있는 대부분의 연구는 클러스터 헤드와 싱크 노드들 사이의 직접적인 통신에 바탕을 두고 있다. 앞에서 이루어진 연구들은 노드들 사이의 거리에 따라 에너지를 계산하는 방식에 기초를 두고 있다. 거리에 따라 에너지를 계산하여 알고리즘을 구현하는 것은 어려운 문제가 된다. 이 논문에서는 싱크 노드에서 다른 모든 노드들까지 고정된 전파 파장의 반경을 갖는 다단계 라우팅 알고리즘을 제안한다. 이 논문에서는 시뮬레이션을 이용하여 WSN이 에너지를 효율적으로 줄이는 것과 WSNdp 활용 방안을 제시한다.

• 한국조경학회지
• /
• 제28권2호
• /
• pp.10-16
• /
• 2000

The purpose of this study is to identify relationships between a central angle and a radius of curvature of divided roads in flat terrain of traditional villages, suggesting layout criteria for traditional villages: Nak-an, Sung-Eup, Ha-Whe. This study is sought to find the optimum model through the various SAS regression analyses. a regression analysis of this data was adopted to induce the relationship formula between a central angle of curve and a radius of curvature. Results of this study are as follows: 1) Most of the divided roads in traditional villages have a complex curve rather than a simple curve. 2) A central angle of curve has ranged from 11$^{\circ}$to 127$^{\circ}$, with a mean degree of 63.9. 3) In the lower level of central angle(11-40$^{\circ}$), the branch roads have distributed with a high frequency, but with a low frequency in the higher level of central angle(90-140$^{\circ}$). 4) A radius of curvature in the divided roads has ranged from 0.9m to 59.6, but half of the roads have concentrated on 1-6m of the curvature. 5) Compared to the result of hilly villages in previous study(Ahn, 1999), value of central angels in flat villages is lower than that of hilly villages, while a mean value of the curvature is higher than that of hilly villages. 6) A Non-linear regression analysis, resulting from the SAS application, was useful method to induce a relationship formula between a central angle and a radius of curvature in the branch roads. Our study's formula is as follow: R=100.3*EXP(-0.06*$\delta$)+3.91. 7) Our study model has less error than that of the Kishizuka's method, being applicable to a broader range of the branch roads. 8) A minimum radius of curvature in our study has showed 3.9m, suggesting to reconsider applications of the Kishizuka's(5.8m) in the footpass design, In the study for this presupposition model the efficiency and utility of it can be estimated to grow large according to how much and how far it includes both extremes of data. This study is for the application to a design in future through the numerical formula of divided roads of various traditional villages. The studies from now on will be about the quasi-hilly quasi-hilly village and hilly village supplementing these factors more.

• 대한정형외과학회지
• /
• 제56권3호
• /
• pp.215-223
• /
• 2021

목적: 소아 요골 원위부 골절은 가장 흔한 골절이면서 불안정 골절의 경우 정복 후에도 재전위 위험성이 높아 주의가 요망된다. 이러한 재전위에 영향을 미치는 요인들에 대하여 평가해 보고자 한다. 대상 및 방법: 2011년 2월부터 2018년 6월까지 완전 전위된 소아 요골 원위부 불안정 골절로 본원 외래에서 보존적 치료한 6세에서 14세까지의 환자들을 대상으로 후향적 연구를 하였다. 전체 대상 환자 44예 중 재전위된 환자들에서 연령, 성별, 석고 지표, 간격 지표, 3점 고정 지표, 골절면 경사도, 관절면에서 골절선까지 거리를 환산한 골절 높이 비, 요골-제2 중수골 각도 등을 측정하여 마지막 골유합 상태에서 남은 각형성의 정도로 결과를 평가하여 비교를 하였다. 결과: 평균 9.2도(0-32.8도) 각형성이 남았으며 범주 내의 결과를 기준으로 하여 10도 미만이 29예, 10도 이상이 15예로 확인되었다. 정복 후 재전위가 발생한 군과 대조군 사이에 평가된 요소들 중 석고 지표들은 두 군 간에 차이가 없었다. 연령, 성별에서도 군 간에 차이가 없었고, 골절면 경사도, 요골-제2 중수골 각도도 차이가 없었다. 관절면에서 골절선까지의 거리를 환산한 골절 높이 비가 가장 의미 있는 안정요소로 평가되었고(p=0.001) 척골 골절이 동반된 경우도 불안정한 요소로 평가되었다(p=0.019). 결론: 소아 요골 간단부 완전 전위 골절, 특히 요골 골간단-골간 이행부의 골절의 경우 불안정한 골절로 평가되므로 좀 더 주의가 필요하며 충분한 재형성을 기대하기 어려운 연령에서는 만족스러운 결과를 위하여 수술적 치료가 선호될 수 있다.

• 한국분무공학회지
• /
• 제26권3호
• /
• pp.127-134
• /
• 2021

Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.