• Environmental Analysis Health and Toxicology
• /
• 제30권
• /
• pp.2.1-2.9
• /
• 2015

Objectives This study aimed to evaluate the association between presence of depression symptoms and the exposure level to insecticides among aged population in rural area, determined via measured levels of urinary 3-phenoxybenzoic acid (3-PBA), after controlling for socioeconomic confounding factors. Methods Using a cross-sectional study design, we randomly recruited participants for our study (161 male and 239 female) from rural areas of Asan, Chungnam, Korea. Environmental risk factor exposure was assessed using a questionnaire, and gas chromatography-mass spectrometry was used to analyze urinary 3-PBA levels. We used a logistic regression analysis to assess the association of urinary 3-PBA levels with the presence of self-reported depression symptoms. Results After controlling for creatinine levels, the median (interquartile range) concentration of 3-PBA was approximately 1.5 times (p<0.05) higher among female (1.54 [0.90 to 2.35]) ${\mu}g/g$) than among male (1.06 [0.64 to 1.81] ${\mu}g/g$). Our study found that among female participants, the unit increase in 3-PBA levels exhibited a likely positive association (odds ratio, 1.12; 95% confidence interval, 1.00 to 1.25) with an increased risk of presence of self-reported depression symptoms, after adjusting for socioeconomic insurance type, daily physical condition, marital status, smoking status, and age. Conclusions Given our finding of a potential association between the presence of self-reported depression symptoms and 3-PBA levels, precautions should be considered to minimize exposure to insecticides and thus protect the health of aged residents in rural areas.

• 방사성폐기물학회지
• /
• 제10권3호
• /
• pp.219-228
• /
• 2012

우리나라에서의 고준위폐기물 처분을 위한 연구는 1997년부터 시작하였으며, 국내에서 발생하는 경수로 사용후핵연료와 중수로 사용후핵연료를 처분대상으로 하여 2006년도에는 한국형 사용후핵연료 기준처분시스템(KRS) 개발을 완료하였다. 이후, 경수로 사용후핵연료로부터 재활용 가능물질을 회수하는 재순환주기를 고려하여 재활용을 위한 파이로공정 연구를 수행하고 있어, 이 공정으로부터 발생하는 고준위폐기물에 대한 처분연구를 수행하고 있다. 본 논문에서는 심지층 처분시스템 개념설정에 중요한 인자인 파이로공정으로부터 발생하는 처분대상 폐기물인 세라믹고화 폐기물과 금속폐기물에 대한 특성분석 결과와 폐기물별로 특성에 적합한 처분용기 개념을 기술하였다. 이를 바탕으로 처분대상 폐기물에서 발생하는 붕괴열의 특성을 고려한 열해석을 통하여 지하처분시설에서의 처분용기 간격과 처분동굴 간격을 결정하고, 이를 반영하여 심지층 처분 시스템(A-KRS) 개념을 도출하였다. 이렇게 도출된 처분시스템 입지를 검토하기 위하여 KURT 시설 부지를 대상으로 가상부지로 설정하고, 가상 부지에 대한 지질 및 수리특성을 이용하여 최적의 배치(안)을 제시하였다. 본 연구의 결과는 추후 실제 부지특성자료와 연계하여 처분장 설계 및 처분안전성 평가에 입력자료로 활용될 것이다.

• 방사성폐기물학회지
• /
• 제10권3호
• /
• pp.151-159
• /
• 2012

선진핵주기 고준위폐기물 처분시스템의 개념설계를 위하여 가상의 처분장 부지인 KURT 시설 부지의 지질조건에서 A-KRS의 입지 후보영역을 선정하였다. 부지의 모암은 한반도에 폭넓게 분포하는 중생대 화강암을 대표하는 것으로 열수변질작용을 받은 흔적이 있으며, 지표수와 지하수계는 일차적으로 지형의 영향을 받아 부지에서 남동진하여 금강으로 배출된다. 부지 내에서 확인된 단열대는 2 등급 규모로서 N-S와 E-W 주향으로 우세하게 분포한다. A-KRS 입지 후보영역을 제안하기 위하여 부지 내에서 공간적으로 -500 m 심도까지 발달되는 것으로 예상되는 단열대를 교차하지 않고 동시에 단열대로부터 50 m 이상의 충분한 이격거리를 갖는 조건에서 처분장 규모의 영역을 확보할 수 있는지를 분석하였다. 분석 결과, 본 부지의 중앙부에 우세하게 분포하는 남북 방향의 주향을 갖는 단열대의 서쪽 영역의 -200 m 이하 심도에서 충분한 영역을 확보할 수 있는 것으로 확인되었다. 단열대의 분포 특성을 감안할 때 부지의 좌하단 영역이 지질학적, 수리지질학적 측면에서 A-KRS 입지 영역으로 가장 양호한 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제7권2호
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.1-13
• /
• 2018

Purpose: The development of compact tractors that can be used in dry fields, greenhouses, and orchards for pest control, weeding, transportation, and harvesting is necessary. The development and performance evaluation of power transmission units are very important when it comes to tractor development. This study evaluates the performance of a driving power transmission unit of a 50 kW multi-purpose narrow tractor. Methods: The performance of the transmission and forward-reverse clutch, which are the main components of the driving power transmission unit of multi-purpose narrow tractors, was evaluated herein. The transmission performance was evaluated in terms of power transmission efficiency, noise, and axle load, while the forward-reverse clutch performance was evaluated in terms of durability. The transmission's power transmission efficiency accounts for the measurement of transmission losses, which occur in the transmission's gear, bearing, and oil seal. The motor's power was input in the transmission's input shaft. The rotational speed and torque were measured in the final output shaft. The noise was measured at each speed level after installing a microphone on the left, right, and upper sides. The axle load test was performed through a continuous equilibrium load test, in which a constant load was continuously applied. The forward-reverse clutch performance was calculated using the engine torque to axle torque ratio with the assembled engine and transmission. Results: The loss of power in the transmission efficiency test of the driving power unit was 6.0-9.7 kW based on all gear steps. This loss of horsepower was equal to 11-18% of the input power (52 kW). The transmission efficiency of the driving power unit was 81.5-89.0%. The noise of the driving power unit was 50-57 dB at 800 rpm, 70-77 dB at 1600 rpm, and 76-83 dB at 2400 rpm. The axle load test verified that the input torque and axle revolutions were constant. The results of the forward-reverse clutch performance test revealed that hydraulic pressure and torque changes were stably maintained when moving forward or backward, and its operation met the hydraulic design standards. Conclusions: When comprehensively examined, these research results were similar to the main driving power transmission systems from USA and Japan in terms of performance. Based on these results, tractor prototypes are expected to be created and supplied to farmhouses after going through sufficient in-situ adaptability tests.

• Journal of Animal Science and Technology
• /
• 제54권5호
• /
• pp.349-354
• /
• 2012

본 연구는 반려견 사료 내 주요 탄수화물원인 밀가루 (원물기준 약 51%)를 현미로 15%, 30% 대체 급여하였을 때, 사료의 소화율 및 배설 분의 특성 변화를 조사하기 위하여 Miniature Poodle (8~9개월령, 평균 3.5kg) 6마리를 이용 반복 $3{\times}3$ 라틴방각법에 따라 실험을 수행하였다. 건물 섭취량과 유기물섭취량이 현미수준 증가에 따라 linear하게 감소 (P<0.05)되었는데, 총에너지 섭취량은 15%구에서 가장 낮은 quadratic 효과 (P=0.07)가 나타났다. 현미 대체에 의해 건물, 유기물, 조단백질, 산분해 지방, 에너지 소화율이 linear (P<0.05)하게 증가하였다. 사료의 가소화에너지 및 대사에너지 농도 (kcal/kg DM)도 현미 대체 비율이 증가하면서 linear 하게 증가 (P<0.001, P=0.007)하였다. 생분 배설량과 건조 분량도 모두 linear(P=0.001)하게 감소하였다. 분 score도 linear하게 감소 (P<0.05)하게 감소하였지만, 분 암모니아 농도는 현미대체 비율이 증가 할수록 linear하게 증가 (P<0.05)하였다. 분 암모니아 증가는 linear하게 감소 (P<0.01)한 short chain fatty acid 농도와도 관계가 있을 것으로 판단된다. 본 실험의 결과, 현미급여가 반려견의 소화율과 배설 분의 특성을 개선해 주는 것으로 나타났다.

• 유통과학연구
• /
• 제14권5호
• /
• pp.91-96
• /
• 2016

Purpose - Although various studies have been conducted on the stress of service employees, there are still lack of studies regarding job stress and job satisfaction of call center workers. Especially there are quite few studies on the job stress according to employment type. This study focused on job stress and job satisfaction for call center employees and the correlation between the two factors and aimed to provide basic materials for seeking for the plans to reduce job stress and improve job satisfaction. Research design, data, and methodology - Frequency, percentage, and mean value were calculated through descriptive statistics in order to find out demographic characteristics, level of job stress, and job satisfaction. Differences in job stress according to employment type were calculated by using one-way ANOVA. Correlation between job stress and job satisfaction were identified through empirical analysis with Pearson's correlation coefficient. 150 materials were used for final analysis. The collected materials were analyzed to get statistics by using SPSS 20. Results - First, as for the job stress of call center workers, overall mean value was 2.54 in 4-point scales. Among the six sub-factors, job demands had the highest score, which was 2.67. Second, as for the job stress according to employment type, others showed higher score than mean value followed by contract job and full-time job in that order, in terms of job insecurity and organizational system. In terms of inappropriate remuneration, contract job showed higher score than mean value followed by others and full-time job. Third, as for the satisfaction with job, the mean value was 2.37 in 4-point scale and "very much satisfied" was only 3.3%. Lastly, in terms of job stress and job satisfaction, all sub-factors except for job demands showed significant correlation. The more job stress increased, the more job satisfaction decreased. Conclusions - First, as a result of analyzing job stress according to the employment type of call center workers, job stress increased more when the employment type was not full-time. Therefore, it was assumed that self-rescue efforts should be followed for effective employment management of call center business where contract employment takes most part as well as efforts to transfer them to full-time job. Second, decrease in job satisfaction of call center workers may affect the performance of an organization as well as service quality of the company providing the service. Therefore, various supports are required to decrease job stress and increase job satisfaction for call center workers through the expansion of rest area or break time. Third, I could recognize that there were lack of academic research on call center business in the whole service industry. Therefore, further research should be conducted more actively in the future. In particular, this study has special significance in the aspect that there were few studies on the job stress of call center workers according to employment type.

• 유통과학연구
• /
• 제14권5호
• /
• pp.81-89
• /
• 2016

Purpose - Prior researches have empirically focused on the effect of management consulting quality and consultant capability on entrepreneurial firms' performance. This study, however, focused on investigating the moderating role of absorptive capacity and resource capability between management consulting and entrepreneurial firms' performance. So, this study investigated the relationship among consulting quality, consultant capability, absorptive capacity, resource capability, and entrepreneurial firms' performance from the resource based view (RBV). Especially, this study focused on the mediating role of absorptive and resource capability in relational structure of entrepreneurial firms' dimensions. Research design, data, and methodology - In this study, research hypotheses and model are established by the prior researches from the fields of strategic management and entrepreneurial behavior. Concretely, H1~H4 are the relationship between consulting (consulting quality, consultant capability) and innovation (absorptive capacity, resource capability); H5 is the relationship between absorptive capacity and resource capability; and H6~H7 are the relationship between innovation (absorptive capacity, resource capability) and management performance. The data was collected 207 copies from entrepreneurial firms in South Korea. These firms were established in January 2014 and maintained by November 2015 in high-tech industry. The questionnaire was consisted of five dimensions; consulting quality, consultant capability, absorptive capacity, resource capability, and management performance. Each dimension measured multi items on a 5-point Likert scale. The hypotheses and research model are analyzed using structural equation modeling (SEM) with AMOS 22. Results - The results of this study are as follows. 1) Consulting quality significantly influenced on the absorptive capacity of entrepreneurial firms. 2) But, consultant capability did not influence on the absorptive capacity of entrepreneurial firms. 3) Consulting quality and consultant capability significantly influenced on the resource capability of entrepreneurial firms. 4) Absorptive capacity significantly influenced on the resource capability of entrepreneurial firms; 5) Absorptive capacity did not significantly influence on the management performance of entrepreneurial firms. 6) Resource capability, however, significantly influenced on the management performance of entrepreneurial firms. By these results, absorptive capacity of entrepreneurial firms had a mediating role partly among consulting quality, consultant capability, and management capability. The resource capability of entrepreneurial firms had a mediating role among consulting quality, consultant capability, and management capability, perfectly. Conclusions - According to this study, the high level of consulting quality and consultant capability may enforce the resource capability of entrepreneurial firms. It means, practically, that external knowledge is a driver for innovation, and then the innovation effects on the management performance of entrepreneurial firms. So, at the initial stage, the management consulting programs are very important to entrepreneurial firms and should be conceived as an essential element. This study may contribute to the advancement of academic in field of new start business, small business, or venture business based on resources, especially the role of absorptive capacity and resource capability between consulting programs and management performance. However, this study has some limitations. They are the measurement of consulting quality's items, cross-sectional research, and the limitation of concept and industry.

• 유통과학연구
• /
• 제15권2호
• /
• pp.59-68
• /
• 2017

Purpose - The year 2016 marks 20 years since the opening of Korean distribution market in 1996. After this opening, the domestic market expanded and modernized, and has grown to become an advanced distribution market with a greater range of consumer choices. On the other hand, traditional markets have waned and their management has become worse. However, traditional markets do not have economic value alone. This study examines the effects of social value in traditional market such as the value of Cultural Tourism and the value of Sharing Community with Traditional Market on Satisfaction, Loyalty and Place Attachment of the residents. Research design, data and methodology - A questionnaire was organized for this study after a hypothesis was set based on theoretical background. Verification of the hypothesis was undertaken by statistically analyzing questionnaire responses. Personal interviews were performed for this study, and a total of 300 responses were collected, of which 228 responses (76%) were from women. The survey coverage was divided into 10 regions ranging from metropolitan areas to the provincial level, and the age groups were divided into 30s to 60s to ensure diversity of the area and age. Results - To summarize the study results, through verification of the hypothesis in terms of meaningful influence, it appears the values of Cultural Tourism to Satisfaction and Loyalty are supported. On the other hand, the value of Sharing Community is only supported for Satisfaction. It appears that Satisfaction to Loyalty and Loyalty to Place Attachment are meaningful effects. The mediator effect was also reconciled through satisfaction and loyalty. Loyalty was analyzed in terms of mediating the effect of satisfaction on place attachment. Conclusions - It is noted in this study that government support is required to preserve traditional markets and renewal program. Community requires multilateral communication and the formation of effective relationships. In contrast to the economic value emphasized by large retailers, the empirical analysis of the non-economic effects of traditional markets has presented the significance of socio-cultural values in traditional markets. In the future, socio-cultural values and economic values should be integrated into more empirical studies through mutual comparison. Investigating the increase and decrease of social value in traditional markets will help the future formulation in government policy.

• 산경연구논집
• /
• 제9권3호
• /
• pp.81-87
• /
• 2018

Purpose - The perception of the quality of the consumer's distributor's brand(PBs) is generally perceived to be lower than that of the manufacturer's brand(NB), although it is a critical factor in determining the success of PBs. Accordingly, this study examines the characteristics of the convenience store PB products and their correlation with brand trust and purchase intent in the consumers who have had experience purchasing the convenience store PBs to expand the sales variables. Further, this research shows that the marketing strategy is to increase the share of PBs by providing an empirical analysis on the effect of the product attribute factors on the sales volume associated with brand trust, purchase intent, and others. Research design, data, and methodology - The survey period of this study was approximately three weeks from December 1, 2017 to December 21, 2017. The study samples that were taken from 100 random people extracted. The statistical analysis was carried out with multiple regression analysis using the SPSS statistical package. Results - The analysis shows that the brand credibility and purchasing intention were statistically significant differences between the private convenience store private brand products. Specifically, brand trust showed a statistically significant relationship the brand images and quality levels, but the perceived value was not affected statistically. Although the intent of the purchase showed a statistically significant relationship the quality level and the perceived value, the brand image was not statistically significant in its relationship. Conclusions - Overall, it has been established that the perception value does not statistically affect brand trust for convenience store PB products, and that the brand image has no statistically significant effect on the purchase intent. These results are analyzed to be due to the influence of brand in convenience stores themselves rather than brand trust and purchase intentions that affect sales performance, which is the property of private brand food and beverage products, the perceived value of their products. Accordingly, the study found that not only did the marketing performance of the convenience store PB products be improved statistically, but also the cause of the product attributes that were not statistically significant was identified.