• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.447-453
• /
• 1986

Germination and seedling elongation of soybeans [cult. ‘Williams’] were measured at two temperatures (15 and 3$0^{\circ}C$), three seed water contents (30, 50, and 70%), and with and without polyethylene glycol-8000 (PEG) treatments. A split-plot design was used with four replications. Observations were made from two hours to eight days for each treatment combination. Seeds were soaked with 30% PEG solution with 0.2% thiram at 15 C for six days, rinsed with deionized water and dried at 25.5$^{\circ}C$ for three days. Ten treated or untreated seeds were placed on Whatman No. I (9 cm) filter paper in plastic petridishes to which sufficient deionized water was added to adjust seed moisture content to the desired level. The dishes were then sealed with parafilm and placed in a continuous programmed temperature chamber under dark condition. Seedling growth did not occur at either temperature when moisture content was 50 percent or less. Osmo-conditioning with PEG showed positive effects on seedling moisture uptake and seedling growth at 15$^{\circ}C$ but little effect at 3$0^{\circ}C$. Seedling moisture content increased rapidly early in the germination period and reached 60% at 15 C for 56 hours and at 3$0^{\circ}C$ for 28 hours. Seedling growth started when seed moisture reached a critical point of 60% at 15$^{\circ}C$, however, growth started after 20 hours of germination at 3$0^{\circ}C$. Seedlings of soybeans elongated more than four times faster at 3$0^{\circ}C$ than at 15$^{\circ}C$. Water uptake during germination was characterized by two phases in this experiment.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.3
• /
• pp.23-36
• /
• 2019

Background: The purpose of this study was to investigate the effect of Plank exercise on unstable support surfaces on flexibility, abdominal muscle thickness and pain in patients with chronic back pain. Design: Randomized controlled trial. Methods: This study was performed on 16 patients with chronic back pain of ◯◯ military unit. Sixteen subjects were randomly assigned into two groups, an upper extremity trainer group (group I, n=8) and a lower extremity trainer group (group II, n=8). The subjects in group I carried out Flank exercise applying the stability trainer to their upper extremities and ones in group II carried out the same exercise applying the stability trainer to their lower extremities for 4 weeks. In order to ascertain the difference between two groups, flexibility, abdominal muscle thickness and pain were measured before and after the exercise. The flexibility was measured by sit and reach test, the thickness of the abdominal muscle was measured by using ultrasonic imaging equipment, and the pain was measured by the visual analogue scale. A paired t-test was utilized to compare changes in pain, abdominal muscle thickness and flexibility before and after flank exercise on unstable support surfaces. Analysis of Covariance (ANCOVA) was performed for ascertaining the significant differences between groups. The significance level was set by α=.05. Results: 1) The flexibilities of two groups were increased after the exercise (p<0.05). 2) In both groups, the thicknesses of rectus abdominis, external oblique abdominis, internal oblique abdominis, and transverse abdominis were all increased after the exercise (p<0.05). 3) The pains in both groups were decreased after the exercise (p<0.05). 4) In the comparisons of two groups, there were no differences in the flexibility, thickness of external oblique abdominis, internal oblique abdominis and transverse abdominis and pain (p>0.05). Whereas only thickness of Rectus abdominis was larger in the group I than in the group II (p<0.05). Conclusion: Plank exercise on the unstable support surface for 4 weeks resulted in increased flexibility, abdominal muscle thickness and pain reduction in patients with chronic back pain. Therefore, it is considered that performing flank exercise on the unstable supporting surface is suitable for the reduction of the pain in patients with chronic back pain. However, in this study, it is considered that continuous and diverse studies are needed because there was not a large difference between the groups when the upper or lower limbs are provided unstable support surfaces.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.45-54
• /
• 2008

A new proposed repository has a final capacity of 800,000 drums radioactive waste. Most of foreign repositories have a general practice of segregating control zones which mainly contributes to classification of degree of control, whether it is called buffer zone or not. Domestic regulatory requirements of establishment of buffer zone in a repository are not much different from those of nuclear power plants for operation period, in which satisfactory design objective or performance objective is the most important factor in determination of the buffer zone. The meaning of buffer zone after closure is a minimum requested area which can prevent inadvertant intruders from leading to non-allowable exposure during institutional control period. Safety assessment with drinking well scenario giving rise to the highest probability of exposure among the intruder's actions can verify fulfillment of the buffer zone which is determined by operational safety of the repository. At present. for the repository to be constructed in a few years, the same procedure and concept as described in this paper are applied that can satisfy regulatory requirements and radiological safety as well. However, the capacity of the repository will be stepwise extended upto 800,000 drums, consequently its layout will be varied too. Timely considerations will be necessary for current boundary of the buffer zone which has been established on the basis of 100,000 drums disposal.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.151-159
• /
• 2017

A deep geological disposal at a depth of 500 m in stable host rock is considered to be the safest method with current technologies for disposal of spent fuels classified as high-level radioactive waste. The most important requirement is that the temperature of the bentonite buffer, which is a component of the engineered barrier, should not exceed $100^{\circ}C$. In Korea, the amount of spent fuel generated by nuclear power generation, which accounts for about 30% of the total electricity, is continuously increasing and accumulating. Accordingly, the area required to dispose of it is also increasing. In this study, various duplex disposal concepts were derived for the purpose of improving the disposal efficiency by reducing the disposal area. Based on these concepts, thermal analyses were carried out to confirm whether the critical disposal system requirements were met, and the thermal stability of the disposal system was evaluated by analyzing the results. The results showed that upward 75 m or downward 75 m apart from the reference disposal system location of 500 m depth would qualify for the double layered disposal concept. The results of this study can be applied to the establishment of spent fuel management policy and the design of practical commercial disposal system. Detailed analyses with data of a real disposal site are necessary.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.14-25
• /
• 2018

The combined cycle power plant has a cycle of operating the gas turbine with fuel, such as natural gas, and then producing steam using residual heat. The fuel gas is supplied to the gas turbine at a level of 4 to 5 MPa, $200^{\circ}C$ through a compressor and a heat exchanger. In this study, the risk assessment method considering the piping system stress was carried out for safe operation and soundness of the gas fuel supply piping system. The API 580/581 RBI code, which is well known for its risk assessment techniques, is limited to reflect the effect of piping stress on risk. Therefore, the systematic stress of the pipeline is analyzed by using the piping analysis. For the study, the piping system stress analysis was performed using design data of a gas fuel supply piping of a combined cycle power plant. The result of probability of failure evaluated by the API code is compared to the result of stress ratio by piping analysis.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.21-33
• /
• 2015

This study tests the potential of detecting small-magnitude earthquakes (~M3.0) and their precursors using a long-term groundwater-monitoring database. In groundwater records from April to June 2012, abnormal changes in water level, temperature, and electrical conductivity were identified in the bedrock monitoring wells of the Gimcheon-Jijwa, Gangjin-Seongjeon, and Gongju-Jeongan stations. These anomalies could be attributed to the M3.1 earthquake that occurred in the Youngdeok area on May 30th, although no linear relationship was found between the scale of changes and the distance between each monitoring station and the epicenter, which is attributed in part to the wide screen design of the monitoring wells. Groundwater monitoring networks designed specifically for monitoring earthquake impacts could provide better information on the safety of underground space and on the security of emergency water-resources in earthquake disaster areas.

• Ecology and Resilient Infrastructure
• /
• v.2 no.4
• /
• pp.324-329
• /
• 2015

For the restoration of lateral connectivity between rivers and floodplains, it is important to find the isolated former floodplain (IFF) and to characterize its land use in Korean rivers which were channelized by levee constructions for flood protection. The aim of this study is to map the IFF and to assess its land use pattern in the Nakdong River, Korea. The isolated former floodplain was explored by being overlapped on a digital elevation model (DEM), digital topographic map and design flood level using a geographical information system (GIS) in the Nakdong River basin. The land use of the identified IFF was classified by land-use map. The total number of IFFs was 384 and their total area was $291km^2$. While IFFs were usually surrounded by mountain forest in the upper river area, they tended to be located on wide plain areas in the downstream area of Nakdong River. The land use pattern of IFFs was mostly farmland (73.9%) and urban areas (12.7%) in the river. The results of delineation and land use analysis of isolated former floodplain in the Nakdong River will be used as a base line data for planning stream restoration.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.47-64
• /
• 2011

The purpose of this study was to verify the effects of the technology-based STEAM education on attitude toward technology of middle school students. The following hypothesis was stated for the purpose of the study. There is no significant differences of attitude toward technology of middle school students before and after applied the technology-based STEAM education in sub-elements (1) interest in the technology, (2) technology's gender role, (3) technology's importance and influence, (4) accessibility to technology, (5) technology and school curriculum, (6) technology-related career, and (7) technology and creative activity. One-Group Pretest-Posttest Design was applied to 'After-school' activities of ${\bigcirc}{\bigcirc}$ middle school for this experimental research. The data were collected and interpreted statistically by paired samples t-test using SPSS(ver. 15) at the .05 level of significance. The results of the study were as follow: First, the technology-based STEAM education was effective in raising technological attitude of middle school students. Second, the technology-based STEAM education was effective in enhancing attitude of middle school students on interest in technology, technology's gender role, technology's importance and influence, technology and school curriculum, and creative activity. Third, the technology-based STEAM education was not effective in improving attitude on accessibility to technology and aspiration to technology-related occupation of middle school students.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.8-15
• /
• 2006

To reduce costs and address other practical concern related to architectural lighting, we have been involved in various aspects of advanced daylighting design and control. If we look toward future building trends, we see that the advanced has already successfully deployed such complex lighting control systems. This paper takes a broad view of what advanced manufacturers have done to develop energy efficient lighting control technologies such as sensors, lumen maintenance, time of day scheduling, peak demand reduction and so forth. First of all strategies, daylighting controls would also need to be commissioned to respond to the specific daylighting signature of the zone. To translate the daylight in term of the amount of energy savings, an electric lighting system is designed and automatic on-off control system integrated with the contribution of daylighting has been applied to the operating of the artificial lighting. The lighting analysis program, Lumen-Micro predicts the optimal layout of conventional fluorescent and incandescent lighting fixtures to meet the designed lighting level and calculates unit power density, which translates the demanded amount of lighting energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.601-610
• /
• 2020

Recently, damage caused by drought is becoming worse and worse due to the global climate change. To overcome these problems, movable-weir to control the water level has been installed instead of a fixed-weir made from concrete. On the other hand, it is difficult to operate an existing moveable-weir because of the high cost of facility management and manpower consumption. In addition, because most moveable-weirs are installed in power systems, the operating cost and the cost of connection for power systems increase when they are located in remote areas. Therefore, this paper proposes an optimal design algorithm and the evaluation algorithm of the SOC (state of charge) of a lithium-ion battery to replace an existing power supply with eco-friendly movable-power with a power supply system using PV modules and lithium-ion batteries. In addition, this study modeled a 50kW power supply system of a movable-weir using PSCAD/EMTDC S/W. The simulation results confirmed that the proposed algorithm has stable operation characteristics in an independent operation mode and interconnection operation mode and that there is the possibility of commercialization with a benefits evaluation of the eco-friendly power supply system of a movable-weir.