• Asia Marketing Journal
• /
• v.13 no.2
• /
• pp.99-130
• /
• 2011

In recent years, a new way of differentiating product design has emerged -better known as 'masterpiece marketing,' this is a strategy where famous art pieces are borrowed on to product designs. Because the recent trends of well-being and LOHAS have encouraged the consumers' desires to enjoy culture and live a more opulent lifestyle, famous and notable paintings have grown to be more of "approachable masterpieces" to the public. As a strategy intended to develop a new consumerism, while still prioritizing customers' values and their satisfaction, companies have been drawn to this new type of marketing. The current consumption society has converted renowned art pieces from simply works of 'high culture' to a further way of marketing, aimed to differentiate products and dominate the market. Though many products have had masterpieces applied to their designs and have been noticed for their marketability, there has been less systematic research done on the scientific background behind this marketing approach. This research focused on the art pieces' fundamental nature of inducing emotions in the viewer, and hypothesized about how the evaluation of a product may be influenced by the affect provoked by the art piece used. To be more specific, if art pieces with different levels of pleasure and arousal -the two axis of emotion suggested by existing research on emotion -were used on each product, the goal was to see how the different levels influenced the consumer's assessment of the products, focusing on product's type as well as the evaluation of their attributes. First, a pretest was done to verify the relationship between the emotion provoked by the art piece and the consumer's preference. There were two types of surveys, each with five drawings from the ten that were assumed to differ in levels of the two axis of emotion. The survey was composed of questions asking for positive emotion, negative emotion, level of arousal, and preference. The correlation between the measurements of positive and negative emotions was -0.792, so an integrated entry was used in the analysis by subtracting the measurement of negative emotions from that of positive emotions. The first hypothesis that paintings that provoke positive emotions will be more preferred than paintings that bring out negative emotions was supported; and through this research, paintings that were to be used for the products were selected. The second pretest was conducted to settle on an item that would be used in the research. Items meant to measure utilitarian and hedonic attributes of milk and chocolate, the two products to be used in the research, were extracted. Because milk is a utilitarian product with strong practical attributes while chocolate is a hedonic product with strong hedonic attributes, these two were selected to be used in this research. The first study was executed to see if there is a difference in attitude about products that have different painting on their designs, which either induces positive or negative emotions. It was also to verify whether this difference in attitude was mediated by the viewer's preference for the art piece. This study showed that when positive emotion inducing painting was used, the product was better evaluated compared to the product with a painting that provokes a negative emotion, thus supporting the second hypothesis. It was also supported that the effect of affect on product evaluation was mediated by preference for the art piece. The second study was done to see the influence of the level of arousal on the evaluation of the product's attributes. Art pieces that differ in the level of arousal were selected through the pretest, and later it verified the hypothesis that the level of arousal has an effect on the assessment of the attributes of the product. In the case of milk, a utilitarian product, the fourth hypothesis that a high-arousal painting will better evaluated for its hedonic attributes was supported, as well as the fifth, which hypothesized that a low-arousal painting will receive a higher assessment for its utilitarian attributes. However, for chocolate, a hedonic product, both fourth and fifth hypotheses were not supported. This study is significant for the following basis: first, it verified the importance of the emotion induced by the painting on the evaluation of the product's attributes, by applying a systematic and scientific method. Second, it expanded from the existing research on positive/negative emotions to confirm the additional influence of the state of arousal on product evaluation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.407-410
• /
• 2018

As the operating frequency of an electromagnetic wave increases, the maximum output and wavelength of the wave decreases, so that the size of the circuit cannot be reduced. As a result, the fabrication of a circuit with high power (of the order of or greater than kW range) and terahertz wave frequency band is limited, due to the problem of circuit size, to the order of ${\mu}m$ to mm. In order to overcome these limitations, we propose a source design technique for 0.1 THz~0.3 GW level with cylindrical shape (diameter ~2.4 cm). Modeling and computational simulations were performed to optimize the design of the high-power electromagnetic sources based on Cherenkov radiation generation technology using the principle of plasma wakefield acceleration with ponderomotive force and artificial dielectrics. An effective design guideline has been proposed to facilitate the fabrication of high-power terahertz wave vacuum devices of large diameter that are less restricted in circuit size through objective verification.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.31-39
• /
• 2008

This study was performed to develop children's food quality certification system as part of the children's favorite foods safety management projects. As a component of the research, we developed a quality certification logo to build up brand image which is familiar with children, as well as to offer the right standard and opportunity for food selection. The age level contains elementary graders from 8 to 13. The logo concept was focused on 'Safety', 'Certification, Guidance' and 'Health' in accordance with the vision of the Korea Food and Drug Administration (KFDA), "Safe food, good nutrition and healthy children". The logo name was proposed as "Best Food for Children", "Safety Food for Children" and "Children Good Food", which was decided by public subscription in the KFDA. The 36 tentative plans for a seal were proposed depending on names. We conducted a survey for the 12 logo samples, designed by the name of "Children Good Food", to use as the basic material for the development of logo to convey the meaning of children's food quality certification system effectively. This survey was conducted among 321 elementary graders and 331 parents of elementary graders. We selected the most favorite design through the survey and applied it for products practicality. It is expected that a steady policy may be possible to implement by applying the basis of the children's food project.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2010

Purpose: To plan and improve consumers' satisfaction by analyzing consumers' purchasing behavior of spectacles. Also this will show the need of improvement in reliance of an optician. Methods: A total of 307 people (10 to 60 years) participated in individual questionnaires. Questionnaires comprised of general characteristic of surveyed people, purchasing spectacles behavior, satisfaction after purchasing spectacles, reliability of optician, and improvement points of optician. Results: Most important points in selecting the product were the design and the price of the spectacles. 142 people (46.3%) replied "average" and 140 people (45.6%) replied "satisfying" out of maximum point of satisfaction level which was 5 points. 72.3% of people have regularly visiting optical shop due to the high accessibility, after-sales care, and courteous optician. On the contrary, 27.7% replied "never visit same optician shop again" because of the low accessibility, minimal range of products, and high price. Data showed that people had high re liability about the opticians' knowledge of product, and their technique of eye refraction. Data revealed that people did not show high satisfaction about opticians' knowledge of ophthalmology, and price of products. Most important improvement points were accurate spectacle prescription by Opticians rating 42% of reply. Factors most considered during spectacle selection among the 10 to 20 age group were design by 34.8% and price by 10.1%. Among the 40 to 50 age group, most considered factors were design by 14% and spectacle frame material by 10.1%. Conclusions: Satisfaction rate of purchasing spectacles for the total participant group was 4.2 average grades. Reliability of opticians' eye refraction result and prescription was 50.5%. However consumers wanted to obtain more accurate eye refraction result and prescription with more comprehensive explanations. Also, consumers wanted opticians to be sensitive and have appreciative eye in select spectacles for customers, and to offer precise spectacle dispensing services and courteous after-sales care.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.288-296
• /
• 2007

Monascus pilosus (KCCM 60160) in submerged culture was optimized based on culture medium and fermentation conditions. Monacolin-K (Iovastatin), one of the cholesterol lowing-agent which was produced by Monascus pilosus may maintain a healthy lipid level by inhibiting the biosynthesis of cholesterol. Plackett-Burman design and response surface method were employed to study the culture medium for the desirable monacolin-K production. As a result of experimental designs, optimized production medium components and concentrations (g/L) were determined on soluble starch 96, malt extract 44.5, beef extract 30.23, yeast extract 15, $(NH_4)_2SO_4$ 4.03, $Na_2HPO_4{\cdot}12H_2O$ 0.5, L-Histidine 3.0, $KHSO_4$ 1.0, respectively. Monacolin-K production was improved about 3 times in comparison with shake flask fermentation of the basic production medium. The effect of agitation speed (300, 350, 400 and 450 rpm) on the monacolin-K production were also observed in a batch fermenter. Maximum monacolin-K production with the basic production medium was 68 mg/L when agitation speed was 500 rpm. And it was found that all spherical pellets (average diameter of $1.0{\sim}1.5mm$) were dominant during fermentation. Based on the results, the maximum production of 185 mg/L of monacolin-K with the optimized production medium was obtained at pH (controlled) 6.5, agitation rate 400 rpm, aeration rate 1 vvm, and inoculum size 3%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.224-231
• /
• 2010

Purpose: This study was to investigate how the crestal module design could affect the level of marginal bone stress around dental implant. Materials and methods: A submerged implant of 4.1 mm in diameter and 10 mm in length was selected as baseline model (Dentis Co., Daegu,Korea).A total of 5 experimental implants of different crestal modules were designed (Type I model : with microthread at the cervical 3 mm, Type II model : the same thread pattern as Type I but with a trans-gingival module, Type III model: the same thread pattern as the control model but with a trans-gingival module, Type IV model: one piece system with concave transgingival part, Type V model: equipped with beveled platform). Stress analysis was conducted with the use of axisy mmetric finite element modeling scheme. A force of 100 N was applied at 30 degrees from the implant axis. Results: Stress analysis has shown no stress concentration around the marginal bone for the control model. As compared to the control model, the stress levels of 0.2 mm areas away from the recorded implant were slightly lower in Type I and Type IV models, but higher in Type II, Type III and Type V models. As compared to 15.09 MPa around for the control model, the stress levels were 14.78 MPa, 18.39 MPa, 21.11 MPa, 14.63 MPa, 17.88 MPa in the cases of Type I, II, III, IV and V models. Conclusion: From these results, the conclusion was drawn that the microthread and the concavity with either crestal or trans-gingival modules maybe used in standard size dental implants to reduce marginal bone stress.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.152-157
• /
• 2008

The customer satisfaction of WAP service greatly relies on the usability of the service due to the limited display size of a mobile phone and limitation in realizing UI (User Interface) for function keys, browser, and OS (operating system) Currently, a number of contents providers develop and deliver varying services, and thus, it is critical to control quality level of UI in consistent standards and manner. This study suggests usability index evaluation system to achieve consistent UI quality control of various WAP services. The system adopts both top-down and bottom-up approaches. The former concerns deriving UI design components and evaluation checklists for the WAP, based on the usability attributes and UI principles. The latter concerns deriving usability-related evaluation checklists from the established UI design features, and then grouping them from the viewpoint of usability principles and attributes. This bidirectional approach has two outstanding advantages: it allows thorough examination of potential elements that can cause usability problems from the standpoint of usability attributes, and also derives specific evaluation elements from the perspective of UI design components that are relevant to the real service environment. The evaluation system constitutes a hierarchical structure by networking usability attributes, UI guideline which indicates usability principles for each attribute, and usability evaluation checklist for each UI component that enables specific evaluation. Especially, each evaluation checklist contains concrete contents and format so that it can be readily marked in O/X. The score is based on the ratio of number of items that received positive answer to the number of total items. This enables a quantitative evaluation of the usability of mobile WAP service. The validity of the proposed evaluation system has been proved through comparative analysis with the real usability problems based on the user test. A software was developed that provides guideline for evaluation objects, criteria and examples for each checklist, and automatically calculates a score. The software was applied to evaluating and improving the real mobile WAP service.

• Archives of design research
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2000

The purpose of this study is to find out what is the preference of users according to the location of benches at urban community parks. This location of benches is seperated into 4 patterns according to arranging pattern of water space, a walk, pergola and shelter, greenspace. To investigate the visual preference is examined by analyzing visual volume of 4 patterns. Results are as follows; 1. Factor analysis by the total data showed that 5 factors explain 60.40 percent of total variance of the location of bench visual character. They were classified by the sensitive factor, visual factor, physical-individual factor, distinct factor, density factor. Among 5 factors, the sensitive factor which represented psychological reaction was appreciated to be highest. 2. Most of 20 items showed the following scores of mean values in sementic differential experiment : Spot 1->Spot 4-> 2-> 3. The mean values between arrangement place locational differences showed significantly, that could explain to be a violent contrast between the natural factors(weater space, green space, etc) and the artificial factors (around of pergola, shelter, etc)

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.267-286
• /
• 2013

Recently, the advanced company has been sparing no efforts in improving necessary core knowledge and technology to achieve outstanding work performance. In this rapidly changing knowledge-based society, the company has confronted the task of creating a high value-added knowledge. The role of R&D workforce that corresponds to the characteristic and role of knowledge worker is getting more significant. As the life cycle of technical knowledge and skill shortens, in every industry, the technical knowledge and skill have become essential elements for successful business. It is difficult to improve competitiveness of the company without enhancing the competency of individual and organization. As the competency development which is a part of human resource management in the company is being spread now, it is required to focus on the research of determining necessary competency and to analyze the competency of a core organization in the research institute. 'H' is the semiconductor manufacturing company which has a affiliated research institute with its own R&D engineers. Based on focus group interview and job analysis data, vision and necessary competency were confirmed. And to confirm whether the required competency by job is different or not, analysis was performed by dividing members into workers who are in charge of circuit design and design before process development and who are in the process actualization and process development. Also, this research included members' importance awareness of the determined competency. The interview and job analysis were integrated and analyzed after arranging by groups and contents and the analyzed results were resorted after comparative analysis with a competency dictionary of Spencer & Spencer and competency models which are developed from the advanced research. Derived main competencies are: challenge, responsibility, and prediction/responsiveness, planning a new business, achievement -oriented, training, cooperation, self-development, analytic thinking, scheduling, motivation, communication, commercialization of technology, information gathering, professionalism on the job, and professionalism outside of work. The highly required competency for both jobs was 'Professionalism'. 'Attitude', 'Performance Management', 'Teamwork' for workers in charge of circuit design and 'Challenge', 'Training', 'Professionalism on the job' and 'Communication' were recognized to be required competency for those who are in charge of process actualization and process development. With above results, this research has determined the necessary competency that the 'H' company's affiliated research institute needs and found the difference of required competency by job. Also, it has suggested more enthusiastic education methods or various kinds of education by confirming the importance awareness of competency and individual's level of awareness about the competency.