• 한국안전학회지
• /
• 제39권2호
• /
• pp.75-86
• /
• 2024

Hydrogen has been selected as one of the key technologies for reducing CO₂ emissions to achieve carbon neutrality by 2050. However, hydrogen safety issues should be fully guaranteed before the commercial and widespread utilization of hydrogen. Here, a bow-tie risk assessment is conducted for the hydrogen fuel supply system in a gas turbine power plant, which can be a mass consumption application of hydrogen. The bow-tie program is utilized for a qualitative risk assessment, allowing the analysis of the causes and consequences according to the stages of accidents. This study proposed an advanced bow-tie method, which includes the barrier criticality matrix and visualized maps of quantitative risk reduction. It is based on evaluating the importance of numerous barriers for the extent of their impact. In addition, it emphasizes the prioritization and concentrated management of high-importance barriers. The radar chart of a bow tie allows the visual comparison of risk levels before/after the application of barriers (safety measures). The risk reduction methods are semi-quantitatively analyzed utilizing the criticality matrix and radar chart, and risk factors from multiple aspects are derived. For establishing a secure hydrogen fuel storage system, the improvements suggested by the bow-tie risk assessment results, such as 'Ergonomic equipment design to prevent human error' and 'Emergency shutdown system,' will enhance the safety level. It attempts to contribute to the development and enhancement of an efficient safety management system by suggesting a method of calculating the importance of barriers based on the bow-tie risk assessment.

• 한국항행학회논문지
• /
• 제28권3호
• /
• pp.309-314
• /
• 2024

항공기 인터콤 장비는 조종사, 부조종사를 포함해 항공기 내의 승무원을 포함한 기내 음성 통화 기능을 수행한다. 항공기 개조 개발 사업에서 인터콤을 개발할 경우 추가되는 통신장비 또는 항전장비를 기존 인터콤과 헤드셋을 연동하도록 구성한다. 따라서 개발하는 인터콤은 항공기 헤드셋 마이크를 입력받고, 기존 인터콤에 마이크 신호를 송신하는 구성이 필요하며 일정 수준 이상의 신호품질이 요구된다. 이러한 요구사항을 만족하기 위해 마이크 신호 생성회로를 구성했으나 신호 품질이 불량하여 인터콤 설계 반영이 불가하다 판단했다. 마이크 신호 생성회로 자체의 문제를 없애기 위해 부하효과를 고려한 마이크 신호 브릿지 회로를 구성했고, 기능 및 품질 측정 결과 요구사항에 부합하였다. 본 논문은 마이크 신호 생성회로 및 브릿지 각각의 구성에 대해 제작 및 신호 품질에 대한 시험 결과를 검토한다.

• International Journal of Knowledge Content Development & Technology
• /
• 제14권2호
• /
• pp.81-97
• /
• 2024

The study investigated computer literacy skills as a determinant of electronic reference sources utilization among selected secondary school students in Ado-Odo Ota Local Government, Ogun State, Nigeria. Four specific objectives with conforming research questions guided the study. Descriptive survey research design was adopted for the study. The population of the study comprises of SSS3 students of the three selected Community Secondary Schools in Ado Odo Ota. A sample size of 150 was used for the study. The instrument for data collection was a self-developed structured questionnaire. Data collected was analyzed using frequency and percentages. Findings of the study revealed that majority of secondary school students were not aware of the availability of electronic reference sources. It also revealed that the level of their computer literacy skills was below average. Majority of them have never used computer before and the few of them that have used computer before used it in their homes, their friend's homes or in the cyber café. It was found that lack of formal training on the use of electronic reference sources, lack of access to computer, lack of awareness of availability of electronic reference sources, lack of funds for internet subscriptions, over dependency on printed reference sources and lack of motivation to use electronic reference sources were the major hindrances to the use of electronic reference sources among secondary school students. It was recommended that the school librarians and teachers should play a role in creating awareness among secondary school students about the availability of online/ electronic reference sources among others.

• Animal Bioscience
• /
• 제37권1호
• /
• pp.142-150
• /
• 2024

Objective: This study was conducted to assess effects of heat stress on growth performance, physiological parameters, and blood profiles of Hanwoo steers during early-fattening period in climate chambers. Methods: Four Hanwoo steers (body weight, 454.3±10.9 kg; age, 14±0.1 month) were allocated into four levels of temperature-humidity index (THI) in a 4×4 Latin square design for 21 days (pre-adaptation, 7 d; heat stress, 7 d; post-adaptation, 7 d) per period. Experimental treatments were assigned according to THI chart based on National Institute Animal Science (NIAS, 2022): Comfort (25.5℃ to 26.5℃, 60%; THI 73 to 75), Mild (28℃ to 29℃, 60%; THI 77 to 79), Moderate (29.5℃ to 30.5℃, 80%; THI 82 to 84), and Severe (31℃ to 32℃, 80%; THI 85 to 86) in separate climatic controlled chambers. Results: The dry matter intake (DMI) of the formula feed was lower in Severe compared to Mild and Comfort (p<0.05). The DMI of rice straw was the lowest in Severe and lower in Moderate than Comfort and Mild (p<0.05). Both average daily gain and feed conversion ratio of Severe and Moderate were lower than those of Mild and Comfort (p<0.05). Water intake was the highest in Severe and lower in Moderate compared with Comfort and Mild (p<0.05). Heart rate and rectal temperature increased as THI level increased (p<0.05). Glucose was the lowest in Severe and lower in Moderate compared to Comfort (p<0.05). On the contrary, non-esterified fatty acid was the highest in Severe and lower in Moderate compared with Comfort (p<0.05). Blood urea nitrogen of Moderate and Severe were higher than those of Comfort and Mild (p<0.05). Cortisol increased as THI increased (p<0.05). Conclusion: This study demonstrated the negative effects of heat stress on the performance and physiological responses of Hanwoo steers during the early-fattening period. In addition, it is judged that the THI chart for Hanwoo steers of National Institute of Animal Science (2022) was properly calculated.

• Animal Bioscience
• /
• 제37권1호
• /
• pp.74-83
• /
• 2024

Objective: Mitragyna speciosa Korth is traditionally used in Thailand. They have a high level of antioxidant capacities and bioactive compounds, the potential to modulate rumen fermentation and decrease methane production. The aim of the study was to investigate the different levels of microencapsulated-Mitragyna leaves extracts (MMLE) supplementation on nutrient degradability, rumen ecology, microbial dynamics, and methane production in an in vitro study. Methods: A completely randomized design was used to assign the experimental treatments, MMLE was supplemented at 0%, 4%, 6%, and 8% of the total dry matter (DM) substrate. Results: The addition of MMLE significantly increased in vitro dry matter degradability both at 12, 24, and 48 h, while ammonia-nitrogen (NH₃-N) concentration was improved with MMLE supplementation. The MMLE had the greatest propionate and total volatile fatty acid production when added with 6% of total DM substrate, while decreased the methane production (12, 24, and 48 h). Furthermore, the microbial population of cellulolytic bacteria and Butyrivibrio fibrisolvens were increased, whilst Methanobacteriales was decreased with MMLE feeding. Conclusion: The results indicated that MMLE could be a potential alternative plant-based bioactive compound supplement to be used as ruminant feed additives.

• Journal of Radiation Protection and Research
• /
• 제49권1호
• /
• pp.29-39
• /
• 2024

Background: The gamma emission tomography (GET) device has been reported a reliable technique to inspect partial defects within spent nuclear fuel (SNF) of pin-by-pin level. However, the existing GET devices have low accuracy owing to the high attenuation and scatter probability for SNF inspection condition. The purpose of this study is to design and optimize a Yonsei single-photon emission computed tomography version 2 (YSECT.v.2) for fast inspection of SNF in water storage by acquisition of high-quality tomographic images. Materials and Methods: Using Geant4 (Geant4 Collaboration) and DETECT-2000 (Glenn F. Knoll et al.) Monte Carlo simulation, the geometrical structure of the proposed device was determined and its performance was evaluated for the ¹³⁷Cs source in water. In a Geant4-based assessment, proposed device was compared with the International Atomic Energy Agency (IAEA)-authenticated device for the quality of tomographic images obtained for 12 fuel sources in a 14 × 14 Westinghouse-type fuel assembly. Results and Discussion: According to the results, the length, slit width, and septal width of the collimator were determined to be 65, 2.1, and 1.5 mm, respectively, and the material and length of the trapezoidal-shaped scintillator were determined to be gadolinium aluminum gallium garnet and 45 mm, respectively. Based on the results of performance comparison between the YSECT.v.2 and IAEA's device, the proposed device showed 200 times higher performance in gamma-detection sensitivity and similar source discrimination probability. Conclusion: In this study, we optimally designed the GET device for improving the SNF inspection accuracy and evaluated its performance. Our results show that the YSECT.v.2 device could be employed for SNF inspection.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.88-97
• /
• 2024

Background: This study was to investigate effects of Correlation Analysis between Cervical-Vertebra Angle and Neck Range of Motion, Muscle Strength, Sternocleidomastoid Thickness of Patients with Forward Head Posture Design: Correlation Analysis. Methods: The subjects of this study were a total of 54 people in the forward head position and their ages were between 30 and 50 years old. The subjects cranio-vertebral angles, neck extension, neck flexion, neck rotation angles, neck flexor strength, neck extensor strength, sternocleidomastoid thickness were evaluated through measuring instruments. The thickness of the sternocleidomastoid muscle was measured using an imaging ultrasound diagnostic device (ultra sound, Versana Premier, GE Medical systems, China). CVA was measured by measuring the side photo of the subject was taken with a camera and evaluated.. neck joint range of motion was measured through digital inclinometer for extension, flexion, and neck rotation. neck muscle strength was measured by measuring the using a digital sthenometer. Data analysis in this study was statistically processed using SPSS version 26.0 (IBM SPSS Inc., USA). Correlation analysis was used and the statistical significance level was set at 0.05. Results: The results neck extension(r= 0.70^**), neck flexion(r= 0.67^**), neck rotation(r= 0.56^**), neck extensor muscle strengt(r= 0.85^**), neck flexor muscle strength(r= 0.66^**), sternocleidomastoid thicknes(r= -0.81^**) It indicates that there is a correlation. Conclusion:These results improve the Cervical-vertebra angle of patients with forward head posture should include a program to improve the thickness of the SCM. In the future, study can be used as an evidentiary material for treatment interventions to improve the Cervical-vertebra angle of patients with forward head posture.

• 아태비즈니스연구
• /
• 제14권4호
• /
• pp.233-254
• /
• 2023

Purpose - This study aims to verify whether the effect of tax avoidance on corporate value is non-linear in the Korean financial markets. Design/methodology/approach - This study believes that the cause of the inconsistent empirical analysis results of previous studies that verified the relationship between tax avoidance and firm value may be an error in assuming linearity, and verifies whether a nonlinear relationship exists. The sample company in this study is a December settlement corporation listed on the Korean stock market, and the analysis period is from 2000 to 2021. In the empirical analysis model, Tobin's Q is used as a proxy for corporate value, tax avoidance is used as the main independent variable, and a regression model is designed with corporate size, growth rate, and debt ratio set as control variables. Findings - As a result of the empirical analysis, it can be confirmed that there is an inverted U-shaped nonlinear relationship between tax avoidance and corporate value. In the additional analysis using Ohlson (1995) firm valuation model for the robustness of the results of the empirical analysis, the same nonlinear value relationship between tax avoidance can be confirmed. Research implications or Originality - This study is considered to be meaningful in that it verifies the non-linear relationship of tax avoidance, which has not been attempted in previous studies. The meaning of the inverted U-shaped nonlinear relationship presented in this study is that corporate tax avoidance acts as a factor that increases corporate value up to a certain level, but rather becomes a factor that decreases corporate value when it exceeds a critical point. These results are expected to provide new perspectives and perspectives on tax avoidance to companies belonging to the Korean capital market.

• 아태비즈니스연구
• /
• 제14권4호
• /
• pp.371-385
• /
• 2023

Purpose - The purpose of this study is to analyze Korea's trade relations centered on the MERCOSUR, a major economic integration in Latin America, and identify its problems and suggest measures that can be taken by the government and corporations to reinforce economic cooperation. Design/methodology/approach - To improve the level of contribution of the study, an empirical analysis is necessary. However, due to limited data access, the study will approach the topic of trade relations between Korea and the MERCOSUR with various statistics and literature. Findings - First, there is an urgent need for changes in import-export goods between Korea and the MERCOSUR, as trade is focused on specific items. Second, although foreign direct investment from Korea to the MERCOSUR is centered in manufacturing and mining industries, there should be different investment strategies by countries and industries. Third, it is necessary to reinforce commercial cooperation. Korea currently has Free Trade Agreements with Chile, Peru, and Columbia, but not with MERCOSUR. Therefore, Korea must take active measures to sign an TA with MERCOSUR, which has been put on hold. Research implications or Originality - Latin America has the most thriving market when it comes to Free Trade Agreements worldwide. MERCOSUR is a South American Trade Bloc established by the Treaty of Asunción in 1991 and Protocol of Ouro Preto in 1994. Its full members are Brazil, Argentina, Uruguay and Paraguay. However, there is still a lack of research on the MERCOSUR, and corporations that aim to enter the Latin American market face difficulties due to lack of information. By investigating MERCOSUR and its prospects and analyzing the trade relations with Korea, this study will provide strategic measures for corporations that wish to enter the Latin American market.