• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.143-147
• /
• 2003

Despite of outstanding optical performance of glass lens, glass lens have not been widely used because of poor productivity and high cost due to manufacturing process i.e. grinding, polishing. However, press-forming method of glass lens overcomes this disadvantage because of mass production. When glass lens is produced by press-forming method using closed die, it is needed that the volume of glass lens preform precisely measured in order to prevent incomplete products and to increase in life of die. The present paper shows the shortcoming of forming process with closed die, and performs FEM simulation of forming process with open die in order to overcome this shortcoming. The design parameter of open die is selected in standard of assembly with optical module and maintenance of optical performance. FEM simulation is carried out with selected parameter of open die and two basic preform. According to distribution of effective strain in glass lens, optical property of glass lens formed at each set of die and preform is compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.49-50
• /
• 2010

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.164-167
• /
• 2006

Micro lens especially for optical pick up(Blu-ray) lens module is one of the key products for IT technology. Specific attention has been given to manufacturing of large radius lens but little to small radius less than 2mm diameter with N.A>0.8. This paper deals with a high precision glass molding technology for mass production of Blu-ray pick up lens. Ultra precisely machined tungsten carbide core and glass molding equipments are utilized for forming process. Evaluation was performed in terms of profile accuracy, surface roughness and thickness of fabricated glass lens.

• 한국광학회지
• /
• 제16권1호
• /
• pp.34-42
• /
• 2005

본 논문은 3군 구성의 줌 광학계에 대해 렌즈모듈의 개념을 이용하여 1차량 및 3차 수차를 고려한 최적의 초기설계와 이로부터 실제 줌 광학계를 설계하는 방법을 제안 하였다. 각각의 렌즈모듈에 적절히 1차량과 3차 수차량을 설정함으로써 줌비 2배(f = 4.3∼8.6 mm)를 갖고, 시스템에서 요구하는 구속조건을 만족시키는 초기설계 줌 광학계를 얻었다. 각 군의 역할에 따라 적절히 선정된 각각의 렌즈군의 초점거리 및 1차량이 렌즈모듈의 값과 같도록 독립적으로 설계한 후, 군사이의 공기간격을 조정하므로써 줌궤적을 일치시켰다. 이러한 과정을 통해 설계된 줌 광학계는 렌즈모듈로 구성된 원래의 초기 설계된 줌 광학계와 동일한 1차 특성을 갖는다. 결과적으로 잔여수차 보정을 통해 후군초점조절방식을 이용하는 컴팩트 디지털 카메라 및 모바일 폰용 줌 렌즈로서 유용한 줌 광학계를 얻을 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.

• 소성∙가공
• /
• 제12권4호
• /
• pp.296-301
• /
• 2003

Though a glass tens has outstanding optical performance, it has not been widely used because manufacturing process shows poor productivity and high cost. However, press-forming method of glass lens overcomes these disadvantages with mass production. When glass lens is produced by press-forming method using closed die, it is needed that the volume of glass lens preform is precisely measured in order to prevent incomplete products and to increase in life of die. The present. paper shows the shortcoming of forming process with closed die, and performs FEM simulation of forming process with open die in order to overcome this shortcoming. The design parameters of open die are selected on the basis of assembly with optical module and maintenance of optical performance. FEM simulation is carried out with selected parameter of open die and two basic preform. According to distribution of effective strain in glass lens, optical property of glass lens formed at each set of die and preform is compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.671-672
• /
• 2009

• 한국광학회지
• /
• 제16권3호
• /
• pp.201-208
• /
• 2005

조명각 변조 방식에 의한 3차원 입체영상 표시장치의 구현을 위해 렌티큘라 렌즈가 만족해야할 조건을 확립한 후 근축광선이론으로 렌즈 규격 및 모듈 구조를 설계하였고, 유한광선 추적법(finite ray tracing)을 이용하여 스테레오스코픽 모듈의 규격변화, 조립과정의 정렬오차, 그리고 관찰자의 관찰 조건에 따른 영향을 분석하였다. 이를 통해 신호잡음을 최소화하기 위해 제작 공정에서 렌즈 함몰부가 발생하지 않아야 하며, 평판형 액정 셔터와 렌티큘라 렌즈 판 사이의 어긋남이 최소화되어야 함을 알 수 있었다.

• 한국광학회지
• /
• 제8권2호
• /
• pp.81-87
• /
• 1997

본 논문은 4군구성의 비디오 카메라용 줌광학계에 대해 렌즈모듈의 개념을 이용하여 1차량 및 3차 수차를 고려한 최적의 초기설계와 이로부터 설계 줌광학계를 설계하는 방법을 제안하였다. 최적화 과정을 통해 각각의 렌즈모듈에 적절히 1차량과 3차 수차량을 설정함으로써 줌비 10배(f'=6.1693~58.4065)를 갖고, 최적설계에 필요한 구속조건을 만족시키는 초기설계 줌광학계를 얻었다. 적절히 선정된 각각의 렌즈군의 촛점거리가 렌즈모듈의 촛점거리와 같도록 scaling 한 후, 군사이의 공기간격을 조정하므로써 줌궤적을 일치시켰다. 이러한 과정을 통해 독립적으로 설계된 군들을 결합시켜 얻은 줌광학계는 렌즈모듈로 구성된 원래의 초기설계된 줌광학계와 동일한 1차특성을 갖는다. 결과적으로 잔여수차 보정을 통해 후군촛점조절방식을 이용하는 비디오 카메라 줌렌즈로서 유용한 줌광학계를 얻을 수 있었다.