• 한국콘텐츠학회논문지
• /
• 제11권9호
• /
• pp.372-383
• /
• 2011

본 연구의 목적은 관상동맥중재술 입원 환자의 재원일수의 변이를 규명하기 위해 중증도 보정 모형을 개발하였다. 2004~2006년 퇴원손상환자 조사자료 중 관상동맥중재술 입원 환자 1,011건을 연구대상으로 하였으며, 재원일수의 변이분석은 t검정, 분산분석을 실시하였고, 중증도 보정 재원일수 모형은 데이터마이닝 기법을 이용하였다. 개발된 다중회귀분석 모형을 이용하여 예측 재원일수를 산출하고 이를 실제 재원일수와 비교한 결과 병상규모별, 보험유형과 지역별로 재원일수의 변이가 존재하는 것으로 나타났다. 환자 특성과 중증도를 통제하고 나타난 재원일수의 변이는 공급자 요인으로 설명될 수 있는데, 진료행태나 의료자원에 대한 후속 연구가 필요한 것으로 보인다. 본 연구는 행정 데이터를 이용하여 중증도 모형을 개발하고 변이를 확인하였다는 점에서 활용의 효용성을 높이는 데 기여할 것으로 사료된다.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.125-135
• /
• 1998

The shielded metal arc welding (SMAW) by AC power source was performed to evaluate the arc stability by arc monitoring and analysing. In this study, the arc stability index was evaluated quantitatively by using he coefficient of resistance variation for welding time. This coefficient was obtained for the long time (20sec.) by analysing the waveforms of welding current, voltage and resistance. The coefficient was applied to indicate numerically the variation level of arc length and the degree of arc extinction. Using the coefficient of resistance variation in practical welding, the arc stability of the high titanium oxide electrode (KS E4313) turned out to be better than that of the low hydrogen electrode (KS E4316). In evaluating the skill level of welders by the coefficient, the horizontal fillet weaving welding became clear to be very discriminating because the higher level welder could weave in keeping constant arc length, but the lower level welder showed the characteristics of weaving with the unstable arc length. And it was confirmed that the welding defects as blow holes was formed when the arc stability index were high.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.281-286
• /
• 2003

Experimental study is conducted to clarify the inside and outside pressure variation of passenger cabin for KTX. These pressure variation may give rise to the ear-discomfort. Generally ear-discomfort has been considered as a problem related to high speed train. In this study, the pressure variation of interior, gangway and exterior of KTX passenger car is measured by using the atmospheric pressure sensors and portable data acquisition system. The tunnel from 4000m to 200m in length are chosen for the investigation of length effects. From the results of experiment, the pressure variation of interior per second is under the ear-discomfort limitation in all of tunnel. And, We found that there is a similar pattern of exterior pressure variation. These results generally agree with RTRI's experimental result for Shinkansen.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권9호
• /
• pp.1234-1238
• /
• 2017

Objective: The vertebral number is associated with body length and carcass traits, which represents an economically important trait in farm animals. The variation of vertebral number has been observed in a few mammalian species. However, the variation of vertebral number and quantitative trait loci in sheep breeds have not been well addressed. Methods: In our investigation, the information including gender, age, carcass weight, carcass length and the number of thoracic and lumbar vertebrae from 624 China Kazakh sheep was collected. The effect of vertebral number variation on carcass weight and carcass length was estimated by general linear model. Further, the polymorphic sites of Vertnin (VRTN) gene were identified by sequencing, and the association of the genotype and vertebral number variation was analyzed by the one-way analysis of variance model. Results: The variation of thoracolumbar vertebrae number in Kazakh sheep (18 to 20) was smaller than that in Texel sheep (17 to 21). The individuals with 19 thoracolumbar vertebrae (T13L6) were dominant in Kazakh sheep (79.2%). The association study showed that the numbers of thoracolumbar vertebrae were positively correlated with the carcass length and carcass weight, statistically significant with carcass length. To investigate the association of thoracolumbar vertebrae number with VRTN gene, we genotyped the VRTN gene. A total of 9 polymorphic sites were detected and only a single nucleotide polymorphism (SNP) (rs426367238) was suggested to associate with thoracic vertebral number statistically. Conclusion: The variation of thoracolumbar vertebrae number positively associated with the carcass length and carcass weight, especially with the carcass length. VRTN gene polymorphism of the SNP (rs426367238) with significant effect on thoracic vertebral number could be as a candidate marker to further evaluate its role in influence of thoracolumbar vertebral number.

• 아시안잔디학회지
• /
• 제10권1호
• /
• pp.1-11
• /
• 1996

Fifty accessions in Zoysia species and forty-one hybrid lines were evaluated in order to detect analyze the genectic variation of Zoysiagrasses and to obtain the basic information for breeding. 1.Plant height ranged from 13 to 34.5cm, leaf length from 7 to 26cm, leaf width from 2 to 7mm, and first leaf height from 1.1 to 8.5cm 2. The correlations among plant height, leaf length and first-leaf height were high, but leaf Width was correlated only With leaf length. 3. Stolon length was varied from 10 to 108cm, number of stolons from 12 to 53, internode length from 2 to 6.1cm and coverage percentage from 10 to 90%. 4.There were correlation among stolen length, number of stolons, internode length and coverage percentage except between stolen and internode length. 5.M1J and MC2 showed the highest level in stolen length, number of stolons and coverage percentage. Therefore they will be the best breeding materials for the purpose of fast covering. 6.According to the analysis on October 26, 1995, yellow color-change rate of leaves ranged from 5 to 85%, red color-change from 0 to 75% and sum of yellow and red change from 20 to 95%. Speciallty M2M1 and FL-41 kept green color untill early December, indicating that they had the late dormancy. 7. Visual assessment of stolon length and number of stolons, showed similar tendency With actually measured data. 8. Shoot density was very high in M2M1 and S2, and showed negative correlation with leaf width. 9. It is known in Korea that the darker green color of lawngrass is, the better it looks. There were 11 lines with dark green color leaves such as J 85-10, Meyer in Z. japonira, one asacession in Z. matrella and M2M1, M2S8, JM2, 55C2 in hybrid lines.

• 한국광학회지
• /
• 제14권4호
• /
• pp.359-364
• /
• 2003

편광에 따른 성능 변화가 작은 deep-ridge 도파관 구조에 제작이 용이한 double-sided 프로세스를 이용하여 구현할 수 있는 편광에 무관한 매우 짧은 결합 길이를 가지는 double-sided deep-ridge 도파관 구조를 가지는 새로운 수직 방향성 결합기를 제안하고 여러 가지 구조 파라미터들이 결합길이에 미치는 영향에 대하여 연구하였다. 도파관 폭의 변화에 대한 결합길이의 변화는 코어 두께의 변화에 대한 결합길이의 변화보다 작게 나타나는 것을 볼 수 있었다. 내부 클래딩 영역의 두께가 감소할수록, 코어 두께가 감소할수록 결합 길이가 감소함을 볼 수 있었다. 또한 같은 코어 두께에 대해서는 내부 클래딩 영역의 두께가 감소할수록, 같은 내부 클래딩 영역의 두께에 대해서는 코어 두께가 감소할수록 편광에 관계없이 결합 길이가 같아지는 도파관 폭이 작아짐을 볼 수 있었다.

• 한국양식학회지
• /
• 제12권4호
• /
• pp.267-274
• /
• 1999

A rotifer starin has been isolated from tide pools located near Sogwipo, Cheju Island and the effects of environmental factors (water temperature and salinity) and clonal differences have been examined with regard to size variation and cyclomorphosis. Adult female rotifers varied from 141.61 to $173.97 \mutextrm{m}$ in their mean lorica length under different rearing conditions in the laboratory and also had pointed anterior spines . Thus, this strain was classified as Brachionus rotundiformes. Mean lorica length tended to be smaller as rearing temperature increased although there were some exceptions. Statistical analysis indicated that lorica length was largely influenced by both clonal differences and rearing temperatures although the former as a genetic factor affected lorica length a little more than the latter did ; overall effect of salinity on lorica length was not statistically signicicant; furthermore, cyclomorphosis was also largely influenced by both clonal differences and rearing temperatures, but clonal differences as a genetic factor affected rotifer cyclomorphosis much more than temperature did.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.71-71
• /
• 2017

Stable stand establishment is pre-requisite in direct rice seeding system for obtaining optimal yield of rice crop in rain-fed and waterlogged areas. Anaerobic condition on waterlogged soil causes low germination which significantly reduces crop yield. Due to low availability of tolerant genetic material for anaerobic germination, there is urgent need to evaluate rice germplasm for better germinability under anaerobic conditions. Seeds of the 185 rice accessions were evaluated for germination vigor and coleoptile length under anaerobic conditions. The variation among germplasm was tested for significance using analysis of variance and various multivariate components. Significant level of variation was observed among all accessions for germination vigor and coleoptiles length. Although highest mean values for coleoptiles length (2.1cm) and germination rate (60%) were observed in japonica accessions but maximum coleoptile length (4.68cm) and germination rate (96%) was found in indica genotype CO18. A highly significant and positive correlation was also observed between germination vigor and coleoptiles length, which signify the importance of elongated coleoptile under anaerobic conditions. The PCA analysis illustrated that 97.24% variation was accounted by PC1 while PC2 and PC3 explained 2.54% and 0.24% variation for germination vigor and coleoptile length. PCA scattered plot divided the accessions in four various groups. All AG tolerant accessions were included in group I. Likewise in the case of cluster analysis, two major clades (I and II) were formed. All accessions showing >40% germination rate were included in clade I, whereas all other accessions with <40% germination rate were grouped in clade II. Further more highly tolerant accessions (>80% germination) were grouped in sub-cluster IA.

• 복식
• /
• 제56권7호
• /
• pp.33-45
• /
• 2006

This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the length variation of the upper arm surface, using the method of surgical tape, and to understand the expansion and contraction of parts of body for the making of clothing adaptable to movement. The subjects were li early elementary schoolgirls in Busan area classified with three somatotypes, and arm-movements consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. The results of the analysis of the length of the upper arm surface are as follows: By arm-movements, in the items of horizontal, upper arm length changed more in the front than in the back, and in the items of vertical, represented the opposite of horizontal items. In the items of upper arm, the anterior-posterior axilla length and under arm length were influenced by arm-movements, and the under length of the upper arm represented the maximum rate increase of 74.59%(3.20cm)$\sim$138.72%(4.28cm). In the somatotypes of early elementary schoolgirls, type II was more influenced by arm-movements, and for the making of clothing adaptable to movement, type III needed to reflect more surplus length(2cm) than the other types.

• 산업경영시스템학회지
• /
• 제27권3호
• /
• pp.14-20
• /
• 2004

The coefficient of variation(CV) which is a relatively dimensionless measure of variability is widely used to describe the variation of sample data. However, the properties of CV distribution are little available and few research has been done on estimation and interpretation of CV. In this paper, we give an outline of statistical properties of coefficient of variation and design of control chart based on this statistic. Construction procedures of control chart are presented. The proposed control chart is an efficient method to monitor a process variation for short production run situation. Futhermore, we evaluated the performance of CV control chart by average run length(ARL).