• Korean Journal of Weed Science
• /
• 제31권2호
• /
• pp.134-145
• /
• 2011

The objectives of this study were to investigate fitness difference in growth and rice yield in herbicide-transgenic rice overexpressing Myxococcus xanthus and Arabidopsis thaliana protoporphyrinogen oxidase (Protox) genes and non-transgenic rice. We also aimed to determine whether these fitness differences are related to ALA synthesizing capacity, accumulation of terapyrroles, reactive oxygen species, lipid peroxidation, and antioxidative enzymes at different growth stages of rice. Plant height of the transgenic rice overexpressing M. xanthus (MX) and A. thaliana (AP37) Protox genes at 43, 50, and 65 days after transplanting (DAT) was significantly lower than that of WT. Number of tiller of PX as well as MX and AP37 at 50 and 65 DAT was significantly lower than that of WT. At harvest time, culm length and yield of MX, PX and AP37 and rice straw weight of MX and AP37 were significantly low compared with WT. The reduction of yield in MX, PX, and AP37 was caused by spikelets per panicle and 1000 grain weight, ripened grain, spikelets per panicle, 1000 grain weight, and ripened grain, respectively. On the other hand, 135 the reduction of yield in MX, PX, and AP37 was also observed in another yearly variation experiment. The reduction of rice growth in MX, PX, and AP37 was observed in seedling stage as well as growth duration in field. There were no differences in tetrapyrrole intermediate Proto IX, Mg-Proto IX and Mg-Proto IX monomethyl ester, reactive oxygen species ($H_2O_2$ and ${O_2}^-$), MDA, antioxidative enzymes (SOD, CAT, POX, APX, and GR) and chlorophyll between transgenic lines and wild type, indicating that accumulated tetrapyrrole intermediate and other parameters were not related to growth reduction in transgenic rice. However, ALA synthesizing capacity in MX, PX, and AP37 at one day after exposure to light and 52 DAT was significantly lower than that of WT. Further study is required to elucidate the mechanisms underlying the growth and yield difference between transgenic and WT lines.

• Applied Biological Chemistry
• /
• 제9권
• /
• pp.119-124
• /
• 1968

In order to learn the effect of timing and rate of potash fertilization in the rice plant nursery on the root growth and the vegetative growth of later stage a pot experiment was carried out employing 'Jaekun' a rice variety. Potassium Chloride was applied at the rate of $0{\sim}100g\;K_{2}O/3.3m^2$ right before, and 30 days after seeding. Forty-day old seedlings were transplanted three times successively at the one week intervals with the roots cut each time. Each subject was observed in rooting and other useful traits. A part of seedlings after the third root scission were cultured intact thereafter and the yield characters examined. The results were shown as: 1. The rate of sound seedlings was high in the case that a small amount of potassium was applied as the basic placement while the application of the fertilizer over $75g/3.3m^2$ (as $K_{2}O$) yielded a far less crops. 2. The plant height, number of tillers, number of leaves, and grass weight increased as the amount of potassium was elevated. However, the application of $50g\;K_{2}O/3.3m^2$ in the basic placement and that of $75g\;K_{2}O/3.3m^2$ were the peaks over which the above mentioned characters were weakened. 3. As the amount of potassium was increased the increment in number of rooting was notable, especially when the scission of roots was repeated within the limit of $50{\sim}75g\;K_{2}O/3.3m^2$. 4. In the maximum root newly shooted length indicated was about the same tendency although no statistical significance was observed. 5. The plant height, number of tillers, and variation of weight between grass and root indicated a similar tendency as the number of root shoot. 6. The differences in number of ears, grain yield, and weight of straw between the treatments were not so great but showed somewhat similar trend as in the growth of transplanted plants. In the treatment-100g $K_{2}O/3.3m^2$ the yield (ears, grain and straw) decreased as in the non-fertilized.

• The Journal of the Acoustical Society of Korea
• /
• 제13권6호
• /
• pp.75-82
• /
• 1994

The ray paths and travel times of sound wave in the ocean depend on the physical properties of the propagating media. Ocean Acoustic Tomography(OAT), which is inversely estimate the travel time variations between fixed sources and receivers the physical properties of the corresponding media can he understood. To apply ocean survey technology by using the OAT, the tomographic procedure requires forward problem that variation of the travel times be identified with the variability of the medium. Also, received signals must be satisfied the necessary conditions of ray path stability, identification and resolution in order for OAT to work. The canonical ocean has been determined based on the historical data and its travel time and ray path are used as reference values. The sound speed of canonical ocean in the East Sea is about 1523 m/s at the surface and 1458 m/s at the sound channel axis(400m). Sound speeds in the East Sea are perturbed by warm eddy whose horizontal extension is more than 100 km with deeper than 200 m in depth scale. In this study, an acoustic source and receiver are placed at the depth above the sound channel axis, 350 m, and are separated by 200 km range. Ray paths are identified by the ray theory methed in a range dependent medium whose sound speeds are functions of a range and depth. The eigenray information obtained from interpolation between the rays bracketing the receiver are used to simulate the received signal by convolution of source signal with the eigenray informations. The source signal is taken as a 400 Hz rectangular pulse signal, bandwidth is 16 Hz and pulse length is 64 ms. According to the analysis of the received signal and identified ray path by using numerical model of underwater sound propagation, simulated signals satisfy the necessary conditions of OAT, applied in the East Sea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제28권2호
• /
• pp.194-201
• /
• 1995

In order to make clear the resistance of bag nets, the resistance R of bag nets with wall area S designed in pyramid shape was measured in a circulating water tank with control of flow velocity v and the coefficient k in $R=kSv^2$ was investigated. The coefficient k showed no change In the nets designed in regular pyramid shape when their mouths were attached alternately to the circular and square frames, because their shape in water became a circular cone in the circular frame and equal to the cone with the exception of the vicinity of frame in the square one. On the other hand, a net designed in right pyramid shape and then attached to a rectangular frame showed an elliptic cone with the exception of the vicinity of frame in water, but produced no significant difference in value of k in comparison with that making a circular cone in water. In the nets making a circular cone in water, k was higher in nets with larger d/l, ratio of diameter d to length I of bars, and decreased as the ratio S/S_m$ of S to the area $S_m$ of net mouth was increased or as the attack angle 9 of net to the water flow was decreased. But the value of ks15m was almost constant in the region of S/S_m=1-4$ or $\theta=15-90^{\circ}$ and in creased linearly in S/S_m>4 or in $\theta<15^{\circ}$ However, these variation of k could be summarized by the equation obtained in the previous paper. That is, the coefficient $k(kg\;\cdot\;sec^2/m^4)$ of bag nets was expressed as $$k=160R_e\;^{-01}(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for the condition of $R_e<100$ and $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for $R_e\geq100$, where $S_n$ is their total area projected to the plane perpendicular to the water flow and $R_e$ the Reynolds' number on which the representative size was taken by the value of $\lambda$ defined as $$\lambda={\frac{\pi d^2}{21\;sin\;2\varphi}$$ where If is the angle between two adjacent bars, d the diameter of bars, and 21 the mesh size. Conclusively, it is clarified that the coefficient k obtained in the previous paper agrees with the experimental results for bag nets.

• Water for future
• /
• 제28권6호
• /
• pp.147-158
• /
• 1995

The purpose of this study is to establish a method of estimating the daily urban water demand using statistical model. This method will be used for the development of the efficient management and operation of the water supply facilities. The data used were the daily urban water use, the population, the year lapse and the weather conditions such as temperature, precipitation, relative humidity, etc. Kwangju city was selected for the case study area. The raw data used in this study were rearranged either by month or by season for the purpose of analysis, and the statistical analysis was applied to the data to obtain the regression model. As a result, the multiple linear regression model was developed to estimate the daily urban water use based on the seather condition. The regression constant and the model coefficients were determined for each month of a year. The accuracy of the model was within 3% of average error and within 10% of maximum error. The developed model was found to be useful to the practical operation and management of the water supply facilities.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제38권2호
• /
• pp.129-139
• /
• 2002

Fish distribution characteristics are essential to assess and estimate fisheries resources in a particular area. The primary goal of this study is to determine the distribution characteristics by the bottom trawling in the Yellow Sea west of South Korea. The surveys were carried out between 33$^{\circ}$00'N~37$^{\circ}$00'N latitude and 124$^{\circ}$00'E~126$^{\circ}$00'E longitude at EEZ(Exclusive Economic Zone) of Korea in Yellow Sea on May and August, 1999 and April, 2000. The ships used in this survey were the R/V Chung-kyeong(G/T 300) and R/V Dong-baek(G/T 1,050) of Yeosu National University. The results obtained can be summarized as follows 1. From the trawl data the fisheries resources are seriously decreasing through most of the species(about more 50%) have been appeared only one time at the bottom trawl on April, 2000. The total fish species caught by the trawl net during the 3 times survey were 106 species and a few species(dominant species) of these occupied 50~90% of the quantity of the total quantity by number or by weight. Among the dominant species the tanaka's snailfish was recorded to be the most dominant species in the survey area. The fish species in the Yellow Sea were clustered according to the regions. They clustered in two or three partes to the south-north direction in the spring season and clustered in two parts to the on-off shore direction of the shore in the summer season. Most of the fish caught at the the trawl net with cover-net(30.3mm) were small sized. They were shorter than 15 cm in length and the extruding rate of the cod-end which was 60mm mesh size ranges about 90%. 2. The densities of the number and weight per unit volume derived from the total catches sampled in April, 2000 survey were $1532.2{\times}10^{-6}fish/m^3$ and $39.55{\times}10^{-6}kg/m^3$, respectively. 3. The density variation of fish population between 1999 and 2000 showed a slight tendency to increase.

• Journal of Bio-Environment Control
• /
• 제16권3호
• /
• pp.240-246
• /
• 2007

To evaluated the effect of low temperature storage on quality of fresh shoot of Sedum sermentosum, weight loss, Hunter L, a and b value, chlorophyll, water content, and general appearance were investigated during storage at 20, 10, and $5^{\circ}C$. Just after harvesting, fresh shoots ($10{\pm}2cm$ length) were stored with wrap film (linear LDPE)-packaged condition using the Styrofoam dish ($20{\times}10cm$, which 40 fresh shoots per dish). The fresh weight of 40 shoots was gradually decreased according to days after storage and higher storage temperature. The weight loss of fresh shoots showed significant difference (8.7-25.3%) between just before storage and 10 days after storage, and the degree of weight loss was more severer in higher storage temperature. Wanju local strain showed the lowest weight loss, and the most severe case was Pohang local strain. SPAD value related to chlorophyll content was rapidly decreased after 4 and 6 days at 20 and $10^{\circ}C$ storage, respectively. It was slowly decreased according to days after storage at $5^{\circ}C$. Yellowish color in bottom leaves of shoot appeared after 4, 6 and 8 days at 20, 10, and $5^{\circ}C$ storages, respectively. Hunter L and a values were gradually increased after storage, and it showed significant difference between just before storage and 10 days after storage. The total rate of discoloration over 50% or decay shoot was largely increased as higher temperature. It was significantly correlated to the water content of fresh shoot among local strains $(P{\leq}0.01)$. The freshness of shoot after storage was maintained in order of Wanji, Gunsan, Wando and Pohang local strain. The results indicated that the freshness was maintained for 8 days after $5^{\circ}C$ storage, when the fresh shoot was stored with wrap film-packaged condition.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• The Journal of the Petrological Society of Korea
• /
• 제21권3호
• /
• pp.309-333
• /
• 2012

Basalt having lots of feldspar phenocryst occurred at the northern and southern slope of the Mt. Halla, Jejudo. Among them, the Sioreum trachybasalt in southern slope consists of abundant phenocrysts of plagioclase in aphanitic groundmass. And the number of plagioclase grains are about 20 per $10cm^2$, and based on 667 grains the sizes are 13~0.7 mm (average 4.23 mm) in length and 8.6~0.5 mm (average 2.3 mm) in width. In according to modal analyses, Sioreum basaltic rock consists mainly of plagioclase (16~28%), olivine, clinopyroxene (1.5~6%) and opaque minerals (~0.1%) of magnetite and ilmenite as phenocryst and microphenocryst and groundmass (60~82%). The compositions of plagioclase, olivine and clinopyroxene are bytownite~andesine, chrysolite~hyalosiderite, augite respectively. Plagioclase phenocrysts show different type of zoning, namely, normal, reversal, patchy, oscillatory type. The An contents of zoned plagioclase mainly increase from core to rim. Those of oscillatory type from core to rim show variations of increase following decrease or decrease following increase, being more enriched in rim or almost same to core. Under the microscope, some plagioclase phenocrysts are especially melted in core part or marginal part, or found as only the remnant remain which resulted from reaction with melt. Some clinopyroxene are also corroded in margin part or found as irregular shape resulted from melting. The characteristics of petrography and compositional variation from core to rim of plagioclase and clinopyroxene, indicate that they are disequilibrium with melt and has been undergone geological environmental changes in magma batch during crystallization including magma mixing with replenishment of more mafic and high temperature melt.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권7호
• /
• pp.122-130
• /
• 2013

This work proposes a 12b 100MS/s 45nm CMOS four-step pipeline ADC for high-speed digital communication systems requiring high resolution, low power, and small size. The input SHA employs a gate-bootstrapping circuit to sample wide-band input signals with an accuracy of 12 bits or more. The input SHA and MDACs adopt two-stage op-amps with a gain-boosting technique to achieve the required DC gain and high signal swing range. In addition, cascode and Miller frequency-compensation techniques are selectively used for wide bandwidth and stable signal settling. The cascode current mirror minimizes current mismatch by channel length modulation and supply variation. The finger width of current mirrors and amplifiers is laid out in the same size to reduce device mismatch. The proposed supply- and temperature-insensitive current and voltage references are implemented on chip with optional off-chip reference voltages for various system applications. The prototype ADC in a 45nm CMOS demonstrates the measured DNL and INL within 0.88LSB and 1.46LSB, respectively. The ADC shows a maximum SNDR of 61.0dB and a maximum SFDR of 74.9dB at 100MS/s, respectively. The ADC with an active die area of $0.43mm^2$ consumes 29.8mW at 100MS/s and a 1.1V supply.