• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.292-296
• /
• 2008

Clay-coated rice seeds (clay-coated seeds A and B) were directly sown on dry paddy and their growth and yield were compared with the normal drill-sown seeds on dry flat paddy. In clay-coated seeds, germination was 1 day earlier and the emergence rate was higher up to 5% than that of normal drill-sown seeds. But the apparent number of seedling stand per $m^2$ was lower than that of normal drill-sown seeds, which is due to the smaller amount of seeding in clay-coated seeds. At the early growth stage, the plant height of clay-coated seeds A was taller than that of drill-sown seeds, while the plant height of clay-coated seeds B was 0.7 cm shorter than that of drill-sown seeds. At the late growth stage, however, the difference was insignificant in both cases. The maximum tillering stage was 10 days earlier in drill-sown seeds. Lodging index was the lowest in clay-coated seeds B and there was no difference between clay-coated seeds A and drill-sown seeds. The ratio of stem base weight, culm diameter and culm wall thickness were higher in clay-coated seeds, while the lower internodes (4th, 5th and 6th) length was shorter in claycoated seeds than in drill-sown seeds. In clay-coated seeds, the number of panicle per $m^2$ was smaller, while the number of spikelet per panicle was a little larger than in drill-sown seeds. The rate of ripened grain and brown rice 1,000 grain weight were lower in the clay-coated seeds, thus the yield was $98{\sim}99%$ level of drill-sown seeds. Considering that the amount of seeding in clay-coated seeds was two-thirds of that in drill-sown seeds, it is expected that clay coating method could become an additional technique for direct seeding cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.151-158
• /
• 1993

Since the inhibition of floral induction was considered to be an important subject to get high yield of Angelica gigas, the effects of low temperature, daylengh and shading were investigated in this study. The yield of A. gigas root grown by inhibition of floral induction was compared with the yield obtained by traditional cultivation method. When the seedings were exposed to the natural low air temperature condition until late of November, the plants which had 6 to 8 leaves showed vernalizing effect, and when the low temperature treatment was prolonged until mid of January, 4 to 5 leaf plants showed vernalizing effect. But 2 to 3 leaf plants did not show vernalizing effect regardless of the length of chilling treatment. The effectiveness of exposure to low temperature was markedly dependent upon the age of plants. In the artificial low temperature treatment the range of temperature varied with plant age. Vernalizing effect at 1,5 and 9$^{\circ}C$ of temperature did not show 3,5,6 leaf plants, respectively. The bolting percent in 8 leaf plant at 1,5 and 9$^{\circ}C$ for 8 weeks decreased by 80,45 and 5%, respectively. As daylength became longer, the bolting percent of A. gigas was increased. plants which were grown in the full sunlight showed the highest value in bolting percent, and the bolting percent was not decreased significantly with changing from full sunlight to 50% shading. When A. gigas were grown by the inhibition of floral induction, dry root weight per l0a showed the greatest value in 3 year old plant which 3.6 and 2.4 times higher than that of 1 and 2 year old plant, respectively. The yield of root was increased by 73.7% in 2 year old plant and 159.6% in 3 year old plant compared with the yield obtained by traditional cultivation method.

• Journal of Animal Science and Technology
• /
• v.46 no.6
• /
• pp.937-946
• /
• 2004

Duroc is widely used to improve the meat quality and productivity. To elucidate the phylogenetic relation and the sequence specificity for the maternal property, the complete sequence of mitochondrial genome was determined and the population diversity of Duroc was investigated in this study. The length of mtDNA tested is 16,584-bp. There are several insertion/deletion mutations in the control region and coding regions for tRNA and rRNA, respectively, but not in peptide-coding regions. Four peptide-coding genes(COⅡ, COⅢ, ND3 and ND4) showed incomplete termination codon sequences such as T--, and two(ND2 and ND4L) did alternative initiation codons(AIC), respectively. Especially, the initiation codon sequences of ND2 gene were polymorphic in this population. Polymorphisms were detected in 11-bp duplication motif within control region as well as ND2 and CYTB. Variation patterns observed from the tests on three mtDNA regions were linked completely and then two haplotypes obtained from combining the data dividing this population. Duroc mtDNA is observed at the European pig cluster in the phylogenetic tree, however, the results from the population analyses supported previous opinions. This study suggests that the breed Duroc was mainly originated from the European pig lineage, and Asian lineage was also used to form the pig breed Duroc as maternal progenitors.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.55-60
• /
• 2011

Reduced plants of Spirodela polyrhiza consisting only of fronds, stalks and roots form turions during dormancy. In development, mature fronds produce offspring fronds by vegetative reproduction, and turions arise laterally from the mother frond before dormancy. The turion primordium is derived from the frond, while the frond primordium forms within the turion tissue. In the present study, cellular features, especially those of the plastids, of the above four tissue types have been examined and compared using electron microscopy. Proplastids, found to be numerous in the frond and turion primordia, differentiated into chloroplasts rapidly upon growth. The proplastids were small and the thylakoidal membrane system was rudimentary, howerver the chloroplasts exhibited variation by cell type. Chloroplasts were found within cells of the frond, stalk and root tissue. The thylakoidal membrane system, which formed grana stacks, was moderately developed within frond chloroplasts, while only a few were present in those of the stalk and root cortical cells. One to two starch grains were accumulated within frond chloroplasts, but little to none were found in stalk and root cortical chloroplasts. Contrary to other types of root chloroplasts, those found in the root cap cells developed chloroplasts similar to the frond type. Unlike proplastids of the turion primordia, numerous large amyloplasts occupied most of the turion cell volume. Moreover, the turion cell produced quite large starch grain (s) within the amyloplasts. Accumulation of the starch grains continued until they occupied the most of the stroma and in some cases, individual starch grains reached up to $9.0{\mu}m$ in length. None to little, if any, thylakoidal or internal membranous systems were seldom detected in these amyloplasts. Although the degree of cellular and tissue differentiation was rather minimal within their reduced body, the functional differentiation of Spirodela polyrhiza was very efficient, as is the case in other advanced species.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.229-235
• /
• 1999

To identify the differences on plant growth and yield of two rice cultivars among direct water-seeding methods broadcasting on flooded paddy surface(BF), drilling on flooded paddy surface(DF), and puddled-soil drill seeding(PD) under markedly different weather condition between 1995 and 1996. The mean air temperature for duration from May to June, early growth stage of rice in 1995 was lower $1{\sim}3^{\circ}C$ than that in normal or 1996. In 1995 the respiratory consumption index during panicle formation stage and early ripening stage was higher than those of in 1996 or normal year. Number of seedling stand among the methods of direct seeding rice appeared slightly higher in order of BF>DF>PD. Properly in Nonganbyeo, the number of seedling stand was much low in 1995 compared with in 1996. The leaf area index and shoot dry weight at early growth stage of rice plant and culm length at mature in 1995 were larger in direct water seeding rice than those of machanical transplanting rice, but in 1996. Faster ripening speed and shorter ripening period of rice crop appeared in 1996 compared to in 1995. It was due to higher growing degree-days, sunshine hours and solar radiation during rice growing season in 1996. Dongjinbyeo rice showed higher yield than Nonganbyeo which had lower ripened grains especially in 1995.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.119-123
• /
• 2010

Genetic variations of Chajogi (Perilla frutescens var. crispa) germplasms were investigated by using RAPD markers. Twenty-two Perilla frutescens var. crispa lines collected from various locations were subjected to RAPD analysis using 80 primers. Among them, only 22 primers showed polymorphic bands and these 22 primers provided a total of 224 bands consisting of 127 polymorphic and 97 monomorphioc bands. The polymorphic bands were subjected to phylogenetic analysis using the UPGMA method. From UPGMA, similarity co-efficiency of 22 Chajogi lines ranged from 0.72 to 0.94. The dendrogram of 22 lines obtained through the UPGMA method resulted in two groups (one major group and one minor group). Although the two groups were roughly consistent with growth phenotypes (period of flowering, period of maturity, stem length, number of branches, number of nodes, number of flower clusters and number of ovaries) in detail, much inconsistency also was present

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.65-75
• /
• 1973

Morphological variations of the Korean Oyster, Crassostrea gigas, were studied on the basis of the oyster samples collected from seven ecologically different areas in May and October of 1972 respectively. The sampling areas were Daecheon and Buan in the west coast, Namseong, Cha-myeon, Imyeong and Chubong in the south coast and Pohang in the east coast. The average sizes of the oysters of the west coast were smaller than those of the south coast as well as those of the east coast. The oysters of the east were largest in size, The oysters from subtidal habitats (Chubong and Pohang) had elongated shells and those from intertidal habitats (Buan, Namseong, Imyeong and Chamyeon) had slanted shells. The samples from subtidal habitats showed size variations depending on cultural methods applied. The oysters from Chubong reared by hanging method had their shells as compared to those from Pohang reared by bottom culture method. The ratio of shell height to shell length showed a great variation froms areas to areas with a significant differences. The fatness (meat weight / shell weight) of all the samples collected in October revealed higher value than those collected in May. The oysters from Chubong showed maximum fatness, and those of Pohang showed minimum fatness. Seasonal variations in fatness was not significant in Chubong. On the other hand, it was relatively significant in the oysters from Pohang, Chamyeon, Imyeong and Buan. Water content of the oyster meat was greater in October than in May. It also showed variations in the sampling areas with higher values in the oyster from Imyeong and Chamyeon than those from Chubong, Pohang and Daecheon.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.935-944
• /
• 2014

To elucidate the variation of species composition, biomass and size distribution of fishery resource in the Uljin marine ranching area was investigated at the 4 stations from 2009 to 2010 based on the dredge sampling. During the survey period, a total of 41 fishery resource species were sampled with a mean density of $2,554,633\;ind./km^2$ and mean biomass was $32,946kg/km^2$. A total 36 fishery resource species were sampled with a mean density of $3,198,793\;ind./km^2$ and mean biomass $41,177kg/km^2$ in 2009 and it were sampled a total 31 species, mean $1,910,473kg/km^2$ and $24,716kg/km^2$ in 2010. The major individual-dominant species, occupying over 1% of total individuals, were Gomphina veneriformis (2,491,818 ind., 82.2%), Umbonium costatum (221,973 ind., 8.7%), Mactra chinensis (49,879 ind., 2.0%), Glossaulax didyma hayashii (49,879 ind., 1.9%), Blepharipoda liberate (37,714 ind., 1.5%) and Paguridae spp. (27,266 ind., 1.1%). The major biomass-dominant species, occupying over 1% of total biomass, were G. veneriformis (25,124 kg, 76.3%), G. didyma hayashii (2,596 kg, 7.9%), M. chinensis (2,024 kg, 6.1%), Ovalipes punctatus (921 kg, 2.8%) and Glossaulax didyma didyma (567 kg, 1.7%). From the cluster analysis based on Bray-Curtis similarity matrix of fourth root transformed data of species number and individuals was divided into 2 different groups of the fishery resource community (Group A-St.1, Group B-Sts. 2, 3, 4). The 2009 and 2010 mean Shell length (mm) of G. veneriformis was 37.73 mm, 29.76 mm and M. chinensis was 62.03 mm, 44.94 mm, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.9-16
• /
• 2013

The growth and production of Aulichthys japonicus (6.70~15.32 cm TL) were investigated in an eelgrass bed of Dongdae Bay, Korea throughout 2006. A total 888 A. japonicus were collected with a small beam trawl. Growth in fish total length was expressed by the von Bertalanffy's growth equation as: $L_t=24.8257(1-e^{-0.5583(t+0.4816)})$. The densities, biomass, daily, annual production, and P/B ratio were $0.01{\pm}0.009/m^{-2}$, $0.17{\pm}0.16g/m^2$, $0.00006{\pm}0.00006g$ AFDW/$m^2$/day, 0.02g AFDW/$m^2$/yr, and 0.12, respectively. Monthly variation in production of A. japonicus was large; the peak occurred at July, September and November 2006 (0.000182, 0.000127 and 0.000123 g AFDW/$m^2$/day), where as the lowest value was 0.000003g AFDW/$m^2$/day at April and May 2006. Monthly change in production of A. japonicus was positive correlated with number of individuals, biomass and growth rate.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.31-38
• /
• 2008

This Study discussed the roll forming process analysis of levitation rail for urban Maglev vehicle. To verify validity of roll forming process, we analyzed roll forming process for track shoe which is similar to levitation rail. The analysis process was composed of 12 passes and was performed for only 8 passes except overlapping passes. In the variation of temperature with each pass, surface temperature of the structure was cooled from initial $1200^{\circ}C$ to $1010^{\circ}C$ during 30 second before first pass, and central temperature and surface temperature was cooled to $980^{\circ}C$ and $900^{\circ}C$ in final pass, respectively. A length of structure after final pass is about 5 times longer than that before roll forming process. A strain of structure had a higher value in the inner part of the track shoe and show from minimum 2.5 to maximum 6.5. A torque applying on roll appear high in 2, 3 and 4 passes and a maximum value was $27,000ton{\cdot}mm$. Also it was analyzed that a load to the normal direction needs maximum 300ton.