• The KSFM Journal of Fluid Machinery
• /
• v.11 no.2
• /
• pp.7-12
• /
• 2008

It is attempted, in this study, to analyze the movement of the fluidity of polar magnetic fluid and to relate Newtonian fluid with the Inlet Length of infinity plates when distance between parallel plates is L. A numerical analysis is performed for the variation of inlet length when magnetic effect parameter and polar effect parameter which give special advantages to magnetic fluid are increased. From the result of numerical analysis, we confirmed that the inlet length shortens as the flux around the center axis is accelerated and the flux around the surface of a wall is controlled as the magnetic effect parameter and the polar effect parameter are increased.

• Advances in nano research
• /
• v.13 no.2
• /
• pp.147-164
• /
• 2022

This article investigates the longitudinal vibration of a nanorod embedded in viscoelastic medium according to the nonlocal strain gradient theory. Viscoelastic medium is considered based on Kelvin-Voigt model. Governing partial differential equation is derived based on longitudinal equilibrium and analytical solution is obtained by adopting harmonic motion solution for the nanorod. Modal frequencies and corresponding damping ratios are presented to demonstrate the influences of nonlocal parameter, material length scale, elastic and damping parameters of the viscoelastic medium. It is observed that material length scale parameter is very influential on modal frequencies especially at lower values of nonlocal parameter whereas increase in length scale parameter has less effect at higher values of nonlocal parameter when the medium is purely elastic. Elastic stiffness and damping coefficient of the medium have considerable impacts on modal frequencies and damping ratios, and the highest impact of these parameters on frequency and damping ratio is seen in the first mode. Results calculated based on strain gradient theory are quite different from those calculated based on classical elasticity theory. Hence, nonlocal strain gradient theory including length scale parameter can be used to get more accurate estimations of frequency response of nanorods embedded in viscoelastic medium.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.200-208
• /
• 2009

A macroblock layer rate control for H.264/AVC has the problem that allocated target bits for current frame occasionally are exhausted too fast due to inadequate quantization parameter assignment. In this case, the maximum permissible quantization parameter is used to encode for remaining macroblocks and it leads to degradation of the visual quality. In addition, the header bits length estimation algorithm used for quantization parameter assignment takes the average header bits length for the encoded macroblocks of the previous frame and the current frame. Therefore, it generates a big mismatch between the actually generated header bits length and the estimated header bits length. In this paper, we propose adaptive quantization parameter decision method to prevent early exhausting target bits during encoding the current frame by considering the number of macroblocks that have negative targets bits in previous frame and the improved header bits length estimation scheme for accurate quantization parameter decision.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.127-134
• /
• 2011

It has been reported that the length parameter of high strength bolts results in the variance in tensile loads. The required turn of nut for each length is specified in AISC RCSC specification. There is no specific regulation datum about the bolt length in the two national codes and specifications in Korea. Therefore this study focused on evaluating influence of the clamping torque subjected to length parameter of high strength bolts. Two types of high strength bolt specimens were manufactured and tested; High Strength Hexagon bolt specified in ASTM A490 and Torque Shear Bolt in KS B 2819. The length parameter ranged from 60mm(3d) to 140mm(7d). The torque, turn of nut, and the clamping force were analyzed to review whether length parameter affects on the required tensile strength. To evaluate the effects of the length parameter on the torque and turn of nut for the required strength and clamping force, statistical analysis was also carried out.

• Journal of the Korean Mathematical Society
• /
• v.43 no.6
• /
• pp.1231-1252
• /
• 2006

In this paper we shall explicitly calculate the formula of the algebraic presentation of an embedding of the Teichmiiller space ${\Im}(M)$ into the Goldman space g(M). From this algebraic presentation, we shall show that the Goldman's length parameter on g(M) is an isometric extension of the Fenchel-Nielsen's length parameter on ${\Im}(M)$.

• Water for future
• /
• v.10 no.1
• /
• pp.79-94
• /
• 1977

This study is aimed at the establishment and examination of stochastic model to simulate Run-length and Run-sum of daily rainfall and streamflow. In the analysis, daily rainfall records in major cities (Seoul, Kangnung, Taegu, Kwangju, Busan, and Cheju) and daily streamflow records of Major rivers (Han, Nakdong and Geum River) were used. Also, the fitness of daily rainfall and streamflow to Weibull and one parameter exponential distribution was tested by Chi-square and Kolmogorov-Smirnov test, from which it was found that daily rainfall and streamflow generally fit well to exponential type distribution function. The Run-length and Run-sum were simulated by the Weibull Model (WBL Model), one parameter exponential model (EXP-1 Model) based on the Nonte Carlo technique. In this result, Run-length of rainfall was fitted for one parameter exponential model and Run-length of streamflow was fitted for Weibull model. And Run-sum of rainfall and streamflow were fit comparatively for regression model. Hereby, statistical charactristics of Simulation data were sinilar to historical data.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.8
• /
• pp.106-113
• /
• 2011

The conventional grounding impedance of a counterpoise is calculated as a function of the length of the counterpoise by use of the distributed parameter circuit model with an application of the EMTP(Electromagnetic Transient Program). The adequacy of the distributed parameter circuit model is examined and verified by comparison of the simulated and the measured results. The conventional grounding impedance of the counterpoise is analyzed for the first short stroke and subsequent short stroke currents. As a result, the simulated results show that the minimum conventional grounding impedance gives at a specified length of the counterpoise. The shorter the time taken to reach the peak of injected currents, the shorter the length of the counterpoise having the minimum conventional grounding impedance. We also present the critical lengths of the counterpoise for short stroke currents as a function of soil resistivity. Based on these results, it is necessary to compute the length of the counterpoise in a specified soil resistivity which satisfies both the low conventional grounding impedance requirement whilst also providing a suitable ground resistance in order to obtain an economical design and installation of the counterpoise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1B
• /
• pp.17-24
• /
• 2008

The effect of the variable packet size on the LRD characteristic of the MMPP traffic model is investigated. When we generate packet traffic for the performance evaluation of IP packet network, MMPP model can be used to generate packet interarrival time. And a random length of packet size from a certain distribution can be assigned to each packet. However, there is a possibility that the variable packet size might change the LRD characteristic of the original MMPP model. In this study, we investigate this possibility. For this purpose the 'refined traffic' is defined, where packet arrival time is generated according to the MMPP model and a random packet length from a specific distribution is assigned to each generated packet. Hurst parameter of the refined traffic is estimated and compared with the original Hurst parameter, which is the input parameter of the MMPP model. We also investigate the effect of the packet size distribution on the queueing performance of the MMPP traffic model and the relationship between the Hurst parameter and queueing performance.

• Journal of the Korean Ceramic Society
• /
• v.34 no.9
• /
• pp.927-934
• /
• 1997

Static and cyclic fatigue tests were carried out for alumina specimen to study the statistical analyses (normal, lognormal and Weibull distribution) of fatigue lifetime data and nominal initial crack length data. Fatigue lifetime data followed Weibull distribution better than normal or lognormal distribution, for the shape parameter of the notched specimen was larger than that of the unnotched specimen. The nominal initial crack length data obtained from fatigue lifetime followed the lognormal and Weibull distribution better than normal distribution, for the coefficient of variation of the unnotched specimen was larger than that of the notched specimen, and shape parameter of unnotched specimen was smaller than that of the notched specimen.