• 한국유체기계학회 논문집
• /
• 제11권2호
• /
• pp.7-12
• /
• 2008

It is attempted, in this study, to analyze the movement of the fluidity of polar magnetic fluid and to relate Newtonian fluid with the Inlet Length of infinity plates when distance between parallel plates is L. A numerical analysis is performed for the variation of inlet length when magnetic effect parameter and polar effect parameter which give special advantages to magnetic fluid are increased. From the result of numerical analysis, we confirmed that the inlet length shortens as the flux around the center axis is accelerated and the flux around the surface of a wall is controlled as the magnetic effect parameter and the polar effect parameter are increased.

• Advances in nano research
• /
• 제13권2호
• /
• pp.147-164
• /
• 2022

This article investigates the longitudinal vibration of a nanorod embedded in viscoelastic medium according to the nonlocal strain gradient theory. Viscoelastic medium is considered based on Kelvin-Voigt model. Governing partial differential equation is derived based on longitudinal equilibrium and analytical solution is obtained by adopting harmonic motion solution for the nanorod. Modal frequencies and corresponding damping ratios are presented to demonstrate the influences of nonlocal parameter, material length scale, elastic and damping parameters of the viscoelastic medium. It is observed that material length scale parameter is very influential on modal frequencies especially at lower values of nonlocal parameter whereas increase in length scale parameter has less effect at higher values of nonlocal parameter when the medium is purely elastic. Elastic stiffness and damping coefficient of the medium have considerable impacts on modal frequencies and damping ratios, and the highest impact of these parameters on frequency and damping ratio is seen in the first mode. Results calculated based on strain gradient theory are quite different from those calculated based on classical elasticity theory. Hence, nonlocal strain gradient theory including length scale parameter can be used to get more accurate estimations of frequency response of nanorods embedded in viscoelastic medium.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.200-208
• /
• 2009

H.264/AVC의 매크로블록 단위의 비트율 제어 방법은 부적당한 양자화 파라미터 할당으로 인해 한 프레임에 할당된 목표 비트가 일찍 고갈되곤 하는 문제가 있다. 이 경우 잔여 매크로블록들을 부호화 하기 위해 제한 범위내의 가장 큰 양자화 파라미터가 사용되고 화질 저하로 이어진다. 또한 양자화 파라미터의 할당을 위해 사용되는 헤더 비트량 예측도 이전 프레임과 현재프레임의 부호화된 매크로블록들의 헤더 비트량의 평균으로 구해진다. 따라서 실제 발생하는 헤더 비트량과 오차가 크다. 본 논문에서는 현재 프레임에서 부호화 도중 발생하는 조기 목표 비트 고갈을 막기 위해 이전 프레임들에서 음수 목표 비트를 갖는 매크로블록의 수를 이용한 적응적 양자화 파라미터 결정 방법과 정확한 양자화 파라미터 결정을 위해 향상된 헤더 비트량 예측 방법을 제시한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.127-134
• /
• 2011

고력볼트 길이-직경비가 5d 이상인 경우, 시험을 통한 결과를 활용하여 현장에서 볼트 체결을 하도록 권고하고 있을뿐 길이-직경비에 따른 별도의 규정 및 지침은 없다. 국내에서는 고력볼트 체결법으로 너트회전법이 아닌 토크관리법이 적용하고 있고 최근에는 KS B 2819의 '구조물용 토크-전단형 고장력 볼트'(이하, TS 고력볼트)가 주로 사용되고 있기 때문에 길이 인자에 따른 규정이 국외 기준에 비해 미비한 것이 현실이다. 따라서, 본 논문에서는 TS 고력볼트의 길이인자에 따른 적정 축력 도입을 위한 소요 너트회전각 및 토크를 분석하여 길이변수에 따른 특성을 평가하고자 한다. 실험결과의 분석에서는 통계분석 프로그램 Minitab을 활용하여 길이변수에 대한 유효성을 정량적으로 분석했다.

• 대한수학회지
• /
• 제43권6호
• /
• pp.1231-1252
• /
• 2006

In this paper we shall explicitly calculate the formula of the algebraic presentation of an embedding of the Teichmiiller space ${\Im}(M)$ into the Goldman space g(M). From this algebraic presentation, we shall show that the Goldman's length parameter on g(M) is an isometric extension of the Fenchel-Nielsen's length parameter on ${\Im}(M)$.

• 물과 미래
• /
• 제10권1호
• /
• pp.79-94
• /
• 1977

본 연구는 Run-Length와 Run-Sum에 의한 강우량과 하천유량을 분석하여 그 특성을 구명하고, 이로부터 모의발생 모델(Simulation Model)을 설정하여 검토하는데 목적을 두고 있다. 분석에 있어서는 우리나라의 주요도시(서울, 대구 및 부산)의 일강우량과 주요하천(한강, 낙동강 및 금강)의 일류량 자료들을 사용하였다. 또한 해석에 있어서는 Run-Length와 Run-Sum에 대한 각각의 분포형 분석으로부터 Weibull 분포 및 1-변수지수 분포를 하고 있음을 알았으며, 이로부터 Monte Carlo 기법(Monte Carlo technique)을 기초로 하는 Weibull모델(Weibull model)과 1-변수지수 모델(One-Parameter Exponential Model)에 의해서 Run-Length와 Run-Sum을 모의발생 시켰다. 그 결과 기록치(Historical Data)에 근사한 모의발생 자료(Simulation Data)를 얻었다.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.106-113
• /
• 2011

The conventional grounding impedance of a counterpoise is calculated as a function of the length of the counterpoise by use of the distributed parameter circuit model with an application of the EMTP(Electromagnetic Transient Program). The adequacy of the distributed parameter circuit model is examined and verified by comparison of the simulated and the measured results. The conventional grounding impedance of the counterpoise is analyzed for the first short stroke and subsequent short stroke currents. As a result, the simulated results show that the minimum conventional grounding impedance gives at a specified length of the counterpoise. The shorter the time taken to reach the peak of injected currents, the shorter the length of the counterpoise having the minimum conventional grounding impedance. We also present the critical lengths of the counterpoise for short stroke currents as a function of soil resistivity. Based on these results, it is necessary to compute the length of the counterpoise in a specified soil resistivity which satisfies both the low conventional grounding impedance requirement whilst also providing a suitable ground resistance in order to obtain an economical design and installation of the counterpoise.

• 한국통신학회논문지
• /
• 제33권1B호
• /
• pp.17-24
• /
• 2008

The effect of the variable packet size on the LRD characteristic of the MMPP traffic model is investigated. When we generate packet traffic for the performance evaluation of IP packet network, MMPP model can be used to generate packet interarrival time. And a random length of packet size from a certain distribution can be assigned to each packet. However, there is a possibility that the variable packet size might change the LRD characteristic of the original MMPP model. In this study, we investigate this possibility. For this purpose the 'refined traffic' is defined, where packet arrival time is generated according to the MMPP model and a random packet length from a specific distribution is assigned to each generated packet. Hurst parameter of the refined traffic is estimated and compared with the original Hurst parameter, which is the input parameter of the MMPP model. We also investigate the effect of the packet size distribution on the queueing performance of the MMPP traffic model and the relationship between the Hurst parameter and queueing performance.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.927-934
• /
• 1997

Static and cyclic fatigue tests were carried out for alumina specimen to study the statistical analyses (normal, lognormal and Weibull distribution) of fatigue lifetime data and nominal initial crack length data. Fatigue lifetime data followed Weibull distribution better than normal or lognormal distribution, for the shape parameter of the notched specimen was larger than that of the unnotched specimen. The nominal initial crack length data obtained from fatigue lifetime followed the lognormal and Weibull distribution better than normal distribution, for the coefficient of variation of the unnotched specimen was larger than that of the notched specimen, and shape parameter of unnotched specimen was smaller than that of the notched specimen.