• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.655-659
• /
• 2001

Resident time of the continuous and Instantaneous centrifugal separator using that separates the light and heavy liquids by use of density difference is the orptical factor that affects significantly the chemical metial extraction and the productivity in the chemical and mechanical process. In this paper, the overflow of the device is investigated under consideration of the relationships between inclination angle of liquid feeding screw and the centrifugal force. From the design of the length of a centrifugal separator, the radiuses of rotor and housing, theoretical formulation on the contact radius of separation weir is established through the experiments. From the experiments, it is identified that how much the capacity of inlet impeller and the emulsion phenomenon depend on the screw angle of inlet impeller. Also, we investigate the separation condition and the resident times that are functions of the phase ratio and density.

• Journal of Chest Surgery
• /
• v.24 no.12
• /
• pp.1232-1237
• /
• 1991

The cervical esophageal stricture has various surgical modalities and difficulties in reconstruction. We had experienced a case of successful reconstruction of the cervical esophageal restenosis using the free jejunal graft, on 30 year old man had had esophageal stricture after ingestion of lye. He had undergone colon interposition[esophagocologastrostomy] with left colon feeding gastrostomy. But restenosis was occurred just above of the cervical esophagocolostomy site several times of balloon dilatation were failed. So, we decided to use of the free jejunal graft. The free jejunal graft was isolated about 15cm length with it`s vascular arcades. The graft was irrigated with the mixed solution as isotonic saline, heparin and papaverine chloride. The artery of graft was anastomosed to the branch of the external carotid artery in end to side with continuous sutures of the 8.0 Prolene. The vein of the graft was anastomosed to the branch of the anterior facial vein in end to end with continuous sutures of the 8.0 prolene. Postoperative course was uneventful and the patient was discharged after removal of the tracheostomy cannula and gastrostomy tube.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.345-346
• /
• 2008

We analyzed the structural parameters of a guiding coil and a feeding loop for wireless power transfer in mid-range. The length, diameter, and number of turns of the guiding coil are the major factors to determine the resonant frequency. The separation distance between the coil and the loop also affects the power transfer ratio. This scheme has a greater transmission efficiency than using dipoles.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.139-143
• /
• 1999

Solidification simulation of gray cast iron sheave product was conducted with the consideration of graphite precipitation during solidification, and of casting processes such as post-inoculation method, treatment and rate, the result of which was aimed to be adopted in the field. In risering design(I), shrinkage cavities were predicted to occur in the part below the risers and center part of the product. While the former defect was considered to be due to the solidification behaviour of riser neck, the latter was due to the feeding channel. In design(II), the length of the riser neck was reduced and one top open riser was attached in the center of the product to prevent the formation of shrinkage cavities, whereby defect-free product was produced.

• The Korean Journal of Ecology
• /
• v.13 no.4
• /
• pp.267-283
• /
• 1990

The studies on the dynamics of fish communities in Manggyong River estuary were carried out from September 1989 to August 1990. The results, the fishes of 77 species belonging to 66 genera and 37 families were collected and identified. The dominant species in surveying areas were Thrissa koreana, Harengula zunasi, Synechogobius hasta and Konosirus. T. koreana was grown up to about 110mm of toatl length for a year, H. zunasi about 120mm, K. punctatus about 160mm and S. hasta about 220-460mm, respectively. The spowning season of S. hasta was from March to April, K. punctatus from April to June, H. zunasi from May to June and T. koreana from June to July, respectively. T. koreana and S. hasta belonged to to carnivorous, K. punctatus herbivorous and H. zunasi showed feeding habits of omnivorous fishes.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1079-1088
• /
• 1996

Discontinuous ${\gamma}$-LiAlO2 fibers for fiber-reinforcing MCFC matrixes have been produced by the sol-gel process using the centrifugal spinning apparatus of the Rotary type. Gel fibers could be obtained through spinning of stable LiAlO2 complex polymetric sols under the optimum spinning conditions (hollow-disc rotating velocity 9000 rpm sol feeding rate of 4ml/min flowing N2 temperature of 4$0^{\circ}C$ and flowing N2 pressure of 4 bar). It was found that defect free and densified ${\gamma}$-LiAlO2 fibers with the relative density of 98% and the mean diameter of 4.7${\mu}{\textrm}{m}$ were prepared when the spinned fibers were heat-treated to 100$0^{\circ}C$ on the specified heating schedule. in particular the mean diameter and length of fibers could be controlled by the pressure of flowing N2 and the chopping-sieving method respectively.

• Journal of the Korean Ceramic Society
• /
• v.45 no.3
• /
• pp.142-145
• /
• 2008

The growth of amorphous silica nanowires by on-site feeding of silicon and oxygen is reported. The nanowires were grown on a nickel-coated oxidized silicon substrate without external silicon or oxygen sources. Transmission electron microscopy observation revealed that the nanowires, which have diameters of less than 50 nm and a length of several micrometers, were grown using a traditional vapor-liquid-solid mechanism. Blue photoluminescence was observed from these nanowires at room temperature. An approach to grow nanowires without external precursors may be useful when integrating nanowires into devices structures. This can benefit the fabrication of nanowire-based nanodevices.

• Korean journal of food and cookery science
• /
• v.10 no.3
• /
• pp.296-300
• /
• 1994

Recently hospital food service systems are often burdened with labour problems including employee job dissatisfaction, high labour costs and turn over. It is essential that these factors should be considered in developing for assuring palatable, nutritious, and safe feeding. A survey of 14 hospital conventional food service systems was undertaken and detailed information was collected from 390 catering staff. Foodservice employee satisfaction was evaluated by measuring employee job attitudes towards five aspects of their job using the Job Description Index(JDI). The food serive workers surveyed in this research were less satisfied with their jobs than are other types of workers in other industries. The demographic variables including age, length of employment and kinds of work were significantly related to job satisfaction. It was also found that catering staff in 14 hospitals surveyed were more satisfied with their interpersonal relations with supervisions and co-workers than with work content, pay and promotional opportunities.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.264-275
• /
• 2018

The experiment was conducted to investigate the effects of various dietary conditions on external morphometric traits, and sectioned morphometric traits in the cultured cyprinid loach, (Misgurnus anguillicaudatus) for 28 days. For the fed group there was an increase in body weight, standard length, and morphometric dimensions of the head and body cavity regions compared with the starved and initial groups. Sectioned morphometric trait analysis revealed that relative to the starved group, the fed group had greater body circumference, cross-sectional area, and total height (P<0.05). Our results provide data on external and sectioned morphometric changes under starvation conditions, and can be used as a guide to assist in the regulation and scheduling of feeding, and as indices of the nutritional status of cyprinid loach.

• Neonatal Medicine
• /
• v.16 no.2
• /
• pp.131-136
• /
• 2009

Preterm infants are frequently discharged from the hospital with growth retardation. Given the potentially lifelong effects of growth impairmnet during a critical time of development, considerable effort should be focused on improving growth after discharge. Growth monitoring must be based on regular measurements of weight, length, and head circumference to identify those preterm infants with poor growth that may need additional nutritional support. Although prior studies vary in design and the intervention used, the evidence supports the use of fortified formulas in formula-fed preterm infants after discharge. The situation for infants fed human milk is much less clear, it seems prudent to concentrate our efforts on the encouragement of breast-feeding in this population. Catch up growth may have many benefits, and may lead to improved development. However, its long-term metabolic consequences are currently unclear. Understanding the optimal means of providing nutrition after discharge is an ongoing process.