• Wind and Structures
• /
• 제9권2호
• /
• pp.125-146
• /
• 2006

Stonecutters Bridge of Hong Kong is a cable-stayed bridge with two single-column pylons each 298 m high and an aerodynamic twin deck. The total length of the bridge is 1596 m with a main span of 1018 m. The top 118 m of the tower will comprise structural steel and concrete composite while the bottom part will be of reinforced concrete. The bridge deck at the central span will be of steel whilst the side spans will be of concrete. Stonecutters Bridge has adopted a twin-girder deck design with a wide clear separation of 14.3 m between the two longitudinal girders. Although a number of studies have been conducted to investigate the aerodynamic performance of twin-girder deck, the actual real life application of this type of deck is extremely limited. This therefore triggered the need for conducting the present studies, the main objective of which is to investigate the performance of Stonecutters Bridge against flutter at its in-service stage as well as during construction. Based on the flutter derivatives obtained from the 1:80 scale rigid section model experiment, flutter analysis was carried out using 3-D finite element based single parameter searching method developed by the second author of this paper. A total of 6 finite element models of the bridge covering the in-service stage as well as 5 construction stages were established. The dynamic characteristics of the bridge associated with these stages were computed and applied in the analyses. Apart from the critical wind speeds for the onset of flutter, the dominant modes of vibration participating in the flutter vibration were also identified. The results indicate that the bridge will be stable against flutter at its in-service stage as well as during construction at wind speeds much higher than the verification wind speed of 95 m/s (1-minute mean).

• 한국식품과학회지
• /
• 제22권1호
• /
• pp.7-12
• /
• 1990

산화촉진제 존재하에서의 트리글리세리드 분자종의 산화특성을 밝히기 위하여, 규산 컬럼으로 분획한 대두유 트리글리세리드에 $Fe^{2+}$와 heme 화합물인 myoglobin을 첨가하여 이들 산화촉진제가 트리글리세리드 각 분자종의 신화안정성에 미치는 영향을 조사하였다. 대두유 트리글리세리드에 대한 산화촉진효과는 본 실험의 조건에서는 myoglobin이 $Fe^{2+}$보다 켰으나, 트리글리세리드 분자종의 산화안정성에 있어서는 첨가한 산화촉진제의 종류에는 큰 영향을 받지 않았다. 또 산화촉진제의 효과는 분자종의 구성지방산의 불포화도가 낮은 경우는 뚜렷하였으나 불포화도가 높은 경우는 뚜렷하지 않았다. 그리고 산화촉진제를 첨가하였을 때 트리글리세리트 분자종의 산화안정성은 분자종의 이중결합수가 같은 경우는 구성지방산의 불포화도가 낮을수록 높았으나, 구성지방산의 불포화도가 같은 경우 공존하는 포화지방산 acyl기의 사슬길이에는 영향을 받지 않았다.

• Journal of Ginseng Research
• /
• 제44권6호
• /
• pp.784-789
• /
• 2020

Background: The separation of isomeric compounds from a mixture is a recurring problem in chemistry and phytochemistry research. The purification of pharmacologically active ginsenoside Rb₃ from ginseng extracts is limited by the co-existence of its isomer Rb₂. The aim of the present study was to develop an enzymatic elimination-combined purification method to obtain pure Rb₃ from a mixture of isomers. Methods: To isolate Rb₃ from the isomeric mixture, a simple enzymatic selective elimination method was used. A ginsenoside-transforming glycoside hydrolase (Bgp2) was employed to selectively hydrolyze Rb₂ into ginsenoside Rd. Ginsenoside Rb₃ was then efficiently separated from the mixture using a traditional chromatographic method. Results: Chromatographic purification of Rb₃ was achieved using this novel enzymatic elimination-combined method, with 58.6-times higher yield and 13.1% less time than those of the traditional chromatographic method, with a lower minimum column length for purification. The novelty of this study was the use of a recombinant glycosidase for the selective elimination of the isomer. The isolated ginsenoside Rb₃ can be used in further pharmaceutical studies. Conclusions: Herein, we demonstrated a novel enzymatic elimination-combined purification method for the chromatographic purification of ginsenoside Rb₃. This method can also be applied to purify other isomeric glycoconjugates in mixtures.

• ALGAE
• /
• 제17권1호
• /
• pp.11-19
• /
• 2002

Twenty-nine culture strains belonging to the genus Alexandrium Halim (Dinophyceae) were established from water column or sediments in Korea. Seventeen isolates were identified as A. tamarense (Lebour) Balech, eight isolates as A. sp. cf. catenella and one as A. catenella (Whedon et Kofoid) Balech according to the presence or absence of a ventral pore, the shape of the posterior sulcal plate and the sulcal width. Three isolates were unable to be identified due to considerable distortion of thecal plates and lack of enough materials, but typical of A. tamarense and/or A. catenella. The overall cell shape of A. tamarense was usually longer than wide. The posterior sulcal plate was definitely longer than wide dorsoventrally, and sulcus extended posteriorly without apparent widening. They were distributed in three major coasts of Korea. In contrast, the cell shape of A. sp.cf. catenella was generally anterior-posteriorly flattened. The transversal axis of the posterior sulcal plate was always longer than the longitudinal, or both axes were nearly equal in length. Its sulcus was broader than that of A. tamarense and widened in the direction of antapex about 1.5 times. This morphotype existed in nearshore and offshore waters of the southern Korea sea. One of A. catenella isolates from Jinhae Bay showed no conspicuous differences with A. sp. cf. catenella except for the consistent absence of a ventral pore.

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.251-262
• /
• 1994

The speed of vertical migration and the volume backscattering strength of the scattering layers during the evening and morning transitions between day and night were measured in November 1990-1992 in thermally stratified waters of the East China Sea. Acoustical measurements were carried out using a scientific echo-sounder operating at t재 frequencies of 25 and 100kHz, and using an echo-integration system connected with a micro-computer. Biological sampling was accomplished by bottom trawling to identify fish species recorded on the echo sounder, and the species and length compositions were determined. The values of scattering strength were allocated to group of fishes according to the fish traces on the echo recording paper and the species composition of trawl catches. The vertical velocities of migration derived from the changes in the depths and the values of peak scattering strength of the dense layer vertically migrating toward the bottom or toward the surface. The trawl data suggest that snailfish and fishing frog were the most abundant fishes in all research stations. As sunrise approached, the fish formed a strong concentration just above the thermocline. The the highest values of scattering strength in the entire water column appeared in the depth strata above the thermocline just before the begining of downward migration. As soon as the fish began to migrate downwards across the thermocline, the values of the scattering strength in the depth strata above the thermocline rapidly decreased, while the values for the scattering layer moving slowly toward the bottom gradually increased. During the 1992 surveys, the speed of the vertical migration was estimated to be 0.38m/min in the upward migration and 0.32m/min in the downward migration, respectively. That is the rate of vertical migration was slightly higher at dusk than at dawn. Similar migration patterns were observed on different stations and under different weather conditions during the surveys in 1990.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.212-219
• /
• 2008

To develop the twin-fluid atomizer having the excellent performance of painting, the spray characteristics of how a wide area can be painted efficiently by one time spraying were studied in this paper. Spray phenomena are affected by the many factors determining the spray field such as the spraying pressure of gas, the spraying pressure and viscosity of liquid paints, the opening duration of needle valve, the design dimension of nozzle, and so on. As the results of experiments, these factors affecting on spray characteristics were suggested as followings; 1) The optimum spraying pressure of gas was $0.015{\sim}0.02\;kPa$, and the appropriate spraying pressure of liquid paint was 0.01kPa, In these situations, the setting up pressures must be compensated as much as the losing amount of pressure because a decompression occurred when operating valves. 2) The duration of opening the needle valve must be sustained for $1{\sim}2$ seconds to inject gas after spraying the liquid paint. This operating of the needle valve was necessary to avoid the affect on the changing of liquid column length, and to prevent the droplet deposit at the initial time of spraying. 3) The spray tip penetration was gained form the experimental equation, and the effective spraying angle was $85^{\circ}{\pm}5^{\circ}$ just at he appropriate spraying pressure of gas. The distribution of the area sprayed had the variation in $350{\pm}50\;mm$ because of the spraying pressure of gas, the its distance from the spray tip, and the lift of the needle valve.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.67-75
• /
• 2019

콘크리트 충전강관(Concrete Filled Steel Tube, 이하 CFT) 기둥에 사용되는 내다이아프램은 사용 강재량은 적으나 강관과 네 면을 용접해야 하므로 용접이 까다롭고 개구부가 필요한 단점을 가지고 있다. 본 연구에서 살펴보고자하는 개선 다이아프램은 콘크리트 충전을 위한 중앙부 홀을 4등분하여 각 코너부위를 절삭했다. 개선 다이아프램은 중앙부 홀의 넓이는 기존 다이아프램과 동일하지만 강관과 접하는 다이아프램의 폭이 감소하여 용접 길이가 기존 다이아프램 대비 약 70%가 감소된다. 개선 다이아프램의 인장성능을 검토하기 위하여 콘크리트 타설 홀의 반지름인 R값을 설계 변수로 3개의 실험체를 제작하였다. 단순 인장 실험을 통하여 내다이아프램에 동일 하중을 받았을 때 각 실험체의 면내 변형률을 분석하였다. 범용유한요소해석 프로그램을(ANSYS 19.2)를 사용하여 실제 단순 인장 실험과 동일한 조건으로 해석을 수행하고 개선 다이아프램과 기존 다이아프램의 하중 전달을 비교하였다. 다이아프램의 폭이 플랜지 폭과 같거나 작을 때는 다이아프램의 단부에서 부터 응력이 집중되고 플랜지 폭이 더 클 때는 중앙부에서 응력이 집중되는 것을 확인하였다.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.131-149
• /
• 2013

Various types of reinforcement splicing methods have been developed and implemented in reinforced concrete construction projects for achieving the continuity of reinforcements. Due to the complicated reinforcement arrangements and the difficulties in securing bar spacing, the traditional lap splicing method, which has been widely used in reinforced concrete constructions, often shows low constructability and difficulties in quality control. Also, lap spliced regions are likely to be over-reinforced, which may not be desirable in seismic design. On the other hand, mechanical splicing methods can offer simple and clear arrangements of reinforcement. In order to utilize the couplers for the ribbed-deformed bars, however, additional screw processing at the ends of reinforcing bars is typically required, which often lead to performance degradations of reinforced concrete members due to the lack of workmanship in screw processing or in adjusting the length of reinforcing bars. On the contrary, the use of screw-ribbed reinforcements can easily solve these issues on the mechanical splicing methods, because it does not require the screw process on the bar. In this study, the mechanical coupler suitable for the screw-ribbed reinforcements has been developed, in which any gap between the reinforcements and sleeve device can be removed by grouting high-flow inorganic mortar. This study presents the uniaxial tension tests on the screw-ribbed reinforcement with the mechanical sleeve devices and the cyclic loading tests on RC columns with the developed coupler. The test results show that the mechanical sleeve connection developed in this study has an excellent splicing performance, and that it is applicable to reinforced concrete columns with a proper confinement by hoop reinforcement.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3444-3450
• /
• 2013

Three phase hollow fiber-liquid phase microextraction (HF-LPME), which is faster, simpler and uses a more environmentally friendly sample-preparation technique, was developed for the analysis of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) in human urine. For the effective simultaneous extraction/concentration of NSAIDs by three phase HF-LPME, parameters (such as extraction organic solvent, pH of donor/acceptor phase, stirring speed, salting-out effect, sample temperature, and extraction time) which influence the extraction efficiency were optimized. NSAIDs were extracted and concentrated from 4 mL of aqueous solution at pH 3 (donor phase) into dihexyl ether immobilized in the wall pores of a porous hollow fiber, and then extracted into the acceptor phase at pH 13 located in the lumen of the hollow fiber. After the extraction, 5 ${\mu}L$ of the acceptor phase was directly injected into the HPLC/UV system. Simultaneous chromatographic separation of seven NSAIDs was achieved on an Eclipse XDB-C18 (4.6 mm i.d. ${\times}$ 150 mm length, 5 ${\mu}m$ particle size) column using isocratic elution with 0.1% formic acid and methanol (30:70) at a HPLC-UV/Vis system. Under optimized conditions (extraction solvent, dihexyl ether; $pH_{donor}$, 3; $pH_{acceptor}$, 13; stirring speed, 1500 rpm; NaCl salt, 10%; sample temperature, $60^{\circ}C$; and extraction time, 45 min), enrichment factors (EF) were between 59 and 260. The limit of detection (LOD) and limit of quantitation (LOQ) in the spiked urine matrix were in the concentration range of 5-15 ng/mL and 15-45 ng/mL, respectively. The relative recovery and precision obtained were between 58 and 136% and below 15.7% RSD, respectively. The calibration curve was linear within the range of 0.015-0.96 ng/mL with the square of the correlation coefficient being more than 0.997. The established method can be used to analyse of NSAIDs of low concentration (ng/mL) in urine.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.141-152
• /
• 2015

Most of agricultural structures are consisted of complex components and exposed to various boundary conditions. There have been no ways to express those structures exactly for model experiment. As an alternative, 3D printer can produce any type of solid model. However, there are limited informations related to structural experiments using 3D printer. The object of this study gives the basic informations to structural engineers who try to use 3D printer for model experiment. When PLA was used as a supplier for 3D printer, the outcomes showed less heat deformation to compare with ABS. To test the material properties, two kinds of experiments (three-point flexibility test and compression test) were executed using universal testing machine. In three-point flexibility test, plastic hinge and its deformation were developed as observed in material such as steel. The behavior was in a linear elastic state, and elastic bending modulus and yield force were evaluated. In the compression test using unbraced columns with hinge-hinge boundary condition, the constant yield forces were observed regardless of different lengths in all columns with same section size, whereas the compressive elastic modulus was increased as the length of column was increased. The suggested results can be used for model experiments of various agricultural structures consisted of single material.