원하는 형태의 치아이동을 얻기 위해서는 M/F(Moment/Force) ratio의 조절이 필요하며, 이출 위해서는 치아의 저항중심의 위치를 아는 것은 매우 중요한 일이다. 본 연구에서는 실제 치아주위 환경을 비교적 유사하게 재현할 수 있는 치조골상과 치아의 이동을 시뮬레이션하는 장치를 제작하고, LVDT출 이용한 3차원 운동을 실시간으로 측정할 수 있는 시스템을 사용하여, 힘에 대한 3차원 공간상에서의 치주인대 응력 분포 양상 및 치아 저항중심과 회전축의 위치변화를 계측한 결과 다음과 같은 결론을 얻었다. 1. 상악 견치에 원심방향으로 힘을 가했을 때, 치아의 저항중심의 위치는 힘의 크기와는 무관하였으며, 치근의 치경부측 약 $29\%$ 부위에 위치하였다. 이는 2차원 모형($42\%$) 보다 치관 쪽에 위치한다. 2. 모멘트만 가하는 경우 치아의 저항중심과 회전축은 일치하였다. 3. 치아에 가해지는 모멘트가 증가하는 경우 방향에 관계없이 치아는 정출되는 경향을 보였다. 4. 힘이 가해진 위치, 저항중심, 회전축간에는 일정한 관계가 성립했다 (a x b = $49.6\;mm^2$). 이 관계식을 통해서 수평력이 가해질 때 예상되는 치아운동 양상을 알 수 있다. 5. 수평력이 가해질 때 회전축의 위치는 일직선으로 나타난다.
The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).
도심지나 문화재가 인접한 지역 등의 소음, 진동 등 기존 발파해체 공법이 제한적인 조건에서 사용할 수 있는 구조물 해체공법으로 무소음화학팽창제(soundless chemical demolition agent, SCDA)를 이용한 공법이 있다. 그러나 SCDA의 사용에 대한 기준이나 가이드라인에 참고될 만한 연구는 미미한 실정이다. 이 연구에서는 실내실험을 수행하여 강관의 길이, 외부수분차단, 수화열 발산 등의 다양한 조건에 따른 SCDA의 팽창압 발현 특성을 확인하였다. 또한 SCDA의 최소요구팽창압 예측을 위한 해석모델(자유단 1면, 고정단 3면의 직사각형 모델)을 개발하고 주요변수해석(홀 간 거리, 콘크리트 압축강도)을 수행하였다. 이 연구의 해석결과를 활용하여 자유단으로부터 콘크리트 구조물의 박락을 효과적으로 유도할 수 있을 것으로 판단된다.
본 연구의 목적은 평면 모형의 가로, 세로 비율과 가상 cobb의 각도를 측정하는 등의 화상의 왜곡에 대한 비교 연구를 통해 3 spot DR 척추 전장 촬영 방법의 정확한 정보를 제공하는 것이다. 팬텀은 $H(40cm){\times}V(116cm){\times}D(2.3cm)$ 크기로 납판이 삽입 된 격자형 아크릴로 만들었다. 제작 모형을 사용하여 각 장비에 각각 3회, OFD를 변경하여 총 9회 촬영하였고 납 격자의 가로, 세로 길이와 비율을 측정하였다. 또한 모형에서 임의의 지점을 지정하여 Cobb 각도를 측정하였다. 가로 세로 비율은 CR은 0.98~1.01, scan DR은 0.96~0.97, 3 spot DR은 0.99~1.01로 측정되었다. Cobb 각도는 각각 $52.5{\sim}53.3^{\circ}$, $52.1{\sim}54.3^{\circ}$, $52.8{\sim}53.2^{\circ}$로 측정되었다. 실험 결과에 의해 평면 모형을 이용한 본 연구에서 척추 전장 촬영을 위한 3 spot DR 촬영 방식의 영상은 왜곡이 없는 정확한 방법이다.
본 논문에서는, 국내와 외국에서 선행된 항만분야의 SFA분석과 관련된 선행연구들을 간략하게 검토하였으며, 또한 국내 컨테이너터미널 8곳의 3년간(2002년, 2003년, 2004년)자료를 이용하고, 4개의 투입물[종업원수(명), 부두길이(m), 부지면적(평방m), 갠트리크레인 대수(대)])과 1개의 산출물[년간 컨테이너 처리실적(TEU)]을 이용하여 SFA 및 DEA측정방법으로 실증분석하는 방법을 보여주었으며, 양자의 효율성 순위를 스피어만의 상관분석을 통해 검증하여 보았다. 주요한 실증분석 결과는 다음과 같다. 첫째, 반정규분포를 갖는 기술적 비효율성효과가 존재하지 않는다는 귀무가설을 기각하고 반정규분포를 갖는 기술적 비효율성효과가 존재한다는 대립가설을 채택함으로써 전통적인 평균반응함수(average response function)가 자료를 적절히 표현하지 못한다는 것을 검증하였다. 트랜스로그모형에서는 검정통계량이 19.12로 이 값은 유의수준 0.5%에서 자유도 6을 가진 혼합카이자승분포의 임계치 16.074보다 크므로 유의미하다. 둘째, 시계열자료를 이용한 분석에서는 콥더글러스모형과 트랜스로그모형에서 모두 유의미한 결과를 보였다. 셋째, 우리나라의 컨테이너터미널의 기술적 효율성을 살펴보면 콥더글러스모형에서는 평균 73.49%, 트랜스로그모형에서 평균은 79.04%를 나타냈다. 따라서 국내 컨테이너터미널의 기술적 효율성은 약간 높은 수준임을 알 수 있다. 즉, 한국컨테이너터미널들은 생산요소를 생산변경(production frontier)에 어느정도 근접한 생산량을 산출하도록 약간 높은 효율적으로 투입함으로써 컨테이너터미널을 관리운영하는 과정에서 비효율적인 요소가 어느 정도 존재하지만, 규모에 대한 수익체증(increasing returns to scale)을 나타내고 있다는 것을 시사하고 있다. 넷째, 국내 컨테이너터미널들이 기술적인 효율성을 높이기 위해서는 컨테이너 화물처리량을 높혀야만 되는 것으로 나타났다. 다섯째, DEA효율성수치에 의한 순위와 SFA효율성 수치에 의한 순위상관분석에서는 높은(84.45%) 순위상관이 있는 것으로 나타났다. 본 연구의 정책적인 함의는 항만운영에 관여하는 정책입안가들은 본 연구에서 사용한 SFA모형을 항만의 기술적인 효율성 측정에 도입하는 한편, 기술적인 효율성을 높이기 위해서 컨테이너화물의 처리량(TEU)을 높이는 방법을 도입해야만 한다.
Park, Ju-Hee;Lim, Young-Jun;Kim, Myung-Joo;Kwon, Ho-Beom
The Journal of Advanced Prosthodontics
/
제1권1호
/
pp.19-25
/
2009
STATEMENT OF PROBLEM. Primary stability at the time of implant placement is related to the level of primary bone contact. The level of bone contact with implant is affected by thread design, surgical procedure and bone quality, etc. PURPOSE. The aim of this study was to compare the initial stability of the various taper implants according to the thread designs, half of which were engaged to inferior cortical wall of type IV bone(Group 1) and the rest of which were not engaged to inferior cortical wall(Group 2) by measuring the implant stability quotient(ISQ) and the removal torque value(RTV). MATERIAL AND METHODS. In this study, 6 different implant fixtures with 10 mm length were installed. In order to simulate the sinus inferior wall of type IV bone, one side cortical bone of swine rib was removed. 6 different implants were installed in the same bone block following manufacturer s recommended procedures. Total 10 bone blocks were made for each group. The height of Group 1 bone block was 10 mm for engagement and that of group 2 was 13 mm. The initial stability was measured with ISQ value using Osstell $mentor^{(R)}$ and with removal torque using MGT50 torque gauge. RESULTS. In this study, we found the following results. 1. In Group 1 with fixtures engaged to the inferior cortical wall, there was no significant difference in RTV and ISQ value among the 6 types of implants. 2. In Group 2 with fixtures not engaged to the inferior cortical wall, there was significant difference in RTV and ISQ value among the 6 types of implants(P < .05). 3. There was significant difference in RTV and ISQ value according to whether fixtures were engaged to the inferior cortical wall or not(P < .05). 4. Under-drilling made RTV and ISQ value increase significantly in the NT implants which had lower RTV and ISQ value in Group 2(P < .05). CONCLUSIONS. Without being engaged to the inferior cortical wall fixtures had initial stability affected by implant types. Also in poor quality bone, under-drilling improved initial stability.
This study was attempted to identify the factors affecting profitability of general hospital in Kyung-In Region. Operating profit to gross revenues and net profit to gross revenues were used as a proxy indicator for profitability of hospitals. The unit of analysis was hospital, and the data were collected 5 years data from 20 hospitals. The major findings are as follows; (1) The average operating profit rate was 1.03% and the net profit rate was -5.00% in twenty hospitals in the Kyung-In Region for the last five years. In terms of maximum surplus, the operating profit rate was 14% and net profit rate was 3.40%. In terms of maximum loss revenue, the operating profit rate was -16.56% and the net profit rate was -22.83%. (2) Since the year 1993, which was the starting year of this study, the operating profits and the net profits consistently decreased. (3) Analyzing the difference in profits among various hospital groups, the tertiary hospital group and the 501-1000 beds group exhibited the highest in operating profit rate. Also, among the higher grade number of beds in hospital group, per 100 beds group, the 41-50 beds group exhibited the highest in operating profit rate. There is a statistically significant difference in those groups(p<0.05, p<0.01). (4) In the health care delivery system, the profit gain in the secondary hospital was 51.5% and in the tertiary hospital was 72.4%. Based on the number of beds in each hospital group, the highest profit gain was 75.0% in the over 1001 beds group, and 71.4% in the 501-1000 beds group. Also, among the higher grade number of beds in hospital group, per 100 beds group, the 41-50 beds group exhibited 88.6% surplus. (5) According to the surplus difference based on the analysis of health care utilization, a group with over 31 patients in bed turnover rate, a group with over 96% in bed occupancy rate and group with over 9% in emergency cases to outpatient visits exhibited the highest profit gains. In addition, a group with over 301 patients in daily outpatient visits per 100 beds and group with 11-12 days average length of stay exhibited the highest profit gains. These results are statistically significant(p<0.05, p<0.01). (6) According to a stepwise regression analysis, the variables measuring the bed turnover rate, number of licensed beds, and number of outpatient visits per specialist explain 34.1% of the variation in operating profits. In terms of net profits, the new outpatient visits, the bed turnover rates and the number of general bed variables explain 30.6%. These results are statistically significant(p<0.01).
서울시 북동부의 서울화강암에 대한 불연속면의 특성을 수락산과 불암산 지역으로 구분하여 비교, 분석하였다. 본 연구에서는 암석의 공학적 특성 중 터널과 도로 건설시 중요하게 취급하여 측정된 요소는 다음과 같다: 1) 절리의 방향성, 2) 절리간격, 3) 절리밀도, 4) 암석의 일축압축강도. 이 중 절리의 방향성, 절리간격과 절리밀도는 선조사법, 원형조사법, 그리고 면적조사법을 이용하여 야외에서 직접 측정될 수 있는 요소이나, 암석의 일축압축강도의 측정에는 원래 암석의 시추코아 표본이 필요하지만 이번 연구에서는 간단히 응용할 수 있는 대비공식을 이용하여 계산하였다. 측정된 대표적인 절리의 방향성은 두 지역에서 모두 3조의 방향성이 나타났다. 즉 2조의 수직정방절리와 저각으로 경사하는 1조의 판상절리이었으며, 서로 매우 유사한 방향성을 갖는다. 측정된 절리밀도는 0.039-0.066/cm 이었으며, 면적조사법으로 측정된 평균절리길이는 1.30-4.52m, 평균절리간격은 10.3cm에서 최대 59,6cm로 측정된 조사선의 방향에 따라 변화가 심하다. 또한 슈미트해머 타격값에 근거한 절리면의 일축압축강도는 217 MPa에서 335 MPa로 강한 암체로 판명되었다.
본 연구는 초 중등 수학교사의 '다문화역량' 실태를 파악하고 이를 바탕으로 수학교과에서 다문화교육을 실천할 수 있는 역량 함양을 위한 다문화교사교육의 방향을 제안하고자 한다. 이를 위해 이론적 검토 및 통계적 검증을 거쳐 5점 척도의 '수학교사의 다문화역량 측정도구'를 구성하고 서울, 경기, 인천 지역의 초 중등 수학교사 309명을 대상으로 설문조사를 실시하였다. 그 결과 수학교사들의 다문화역량 평균은 2.636(표준편차 .290)로 조사되었고 다문화와 관련한 일반적인 지식 및 신념을 묻는 범주A와 비교하여 수학교과의 특성이 반영된 범주 B, C, D의 평균이 낮다는 것을 확인할 수 있었다. 또한 집단별 비교를 위한 분산분석 결과 '교사의 경력', '다문화교사 교육 이수 여부', '다양한 배경의 사람들에 대한 간접 접촉 경험 여부'에 따른 집단별 차이가 없는 반면, '다양한 문화적 배경의 사람들과 직접 접촉 경험 여부', '교사의 전공'에 따라 다문화역량이 집단별 유의한 차이가 있는 것으로 조사되었다. 이와 같은 결과를 바탕으로 수학교과를 통해 다문화교육을 수행할 수 있도록 실천적 맥락의 다문화교사교육에 대한 시사점을 논의하였다.
The purpose of this study was to compare the apical seal following root canal shaping by different methods. From fourty extracted mandibular 1st and 2nd molars, fourty mesial roots whose canals have some degree of curvature were selected. The mesiobuccal root portion including mesiobuccal portion of a crown was sectioned in each molar. After access cavity preparation for the mesiobuccal canal, working length was determined with # 10 K-file. The sectioned roots were implanted in acrylic resin block and randomly divided into four groups. The canals of group I were shaped by step-down/balanced force, group II by stepdown/step-back, group III by step-back and group IV by conventional method. All of the shaped canals were obturated by Thermafil method and access cavities were filled with IRM. The roots were removed from acrylic resin block and placed in 100 % humidity for 7days. Except the root surfaces of apical 2mm, the root surfaces were nail-varnished 3 times. After the roots were placed in 700 torr vacuum pressure for 15 minutes, they were immersed in 2% methylene blue solution for 4 days. Nail varnishes were removed with acetone. After that, the roots were decalcified in 5 % nitric acid and dehydrated with alcohol series. Transparent specimens were made by methyl salicylate and the quality of apical seal was assessed by measuring the leakage linearly. The results were as follows. 1. The leakage in canals shaped by step-down/balanced force method was significantly less than that in canals shaped by step-back method(P<0.05) and was less but not statistically than that in canals shaped by step-down/step-back method (P>0.05). 2. The leakage in canals shaped by step-down/step-back method was less than that in canals shaped by step-back method, but there was no statistical significance(P>0.05). 3. The leakage in canals shaped by conventional method was significantly more than that in canals shaped by step-down/balanced force, step-down/step-back and step-back method (P<0.05).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.