• 제목/요약/키워드: length measurement

검색결과 2,195건 처리시간 0.028초

한국 소비자 쇠고기 연도 보증을 위한 도축후 도체 처리기술 (Post-slaughter Intervention Techniques to Ensure Tenderness of Beef Muscles for Korean Consumers)

  • 황인호
    • Journal of Animal Science and Technology
    • /
    • 제48권6호
    • /
    • pp.921-932
    • /
    • 2006
  • 쇠고기 연도 조절에 대한 연구는 오랜 역사를 가지고 있으나, 균일한 쇠고기 맛에 대한 소비자들의 요구 증가로 응용적 연구가 가속화 되고 있다. 도축 후 근절길이와 단백질 분해가 연도에 큰 영향을 미친다는 사실은 잘 밝혀졌다. 전기자극은 맛 보증 프로그램을 위해서 여러 나라에서 산업적으로 이용되고 있다. 전기자극이 연도를 향상(또는 질겨짐 감소)시키는 기전은 모두 밝혀지지 않았으나, 이 처리가 저온 단축을 막고 사후 강직을 단축시켜 단백질 분해를 증가시킨다는 결과는 명확해 보인다. 한편 Tenderstretch는 사후 강직기 동안 근섬유와 결체 조직에 장력을 가하여 고기의 질겨짐을 줄이는 작용을 하는 것으로 보인다. 선행 연구들은 도축 후 전기자극과 Tenderstretch 처리가 지방이 많은 가축과 냉각 온도가 느린 조건에서도 연도를 향상 시킨다는 사실들을 증명하였다. 최근 연구에 의하면 한국 소비자들도 연도가 쇠고기 맛을 결정하는데 중요한 요인이며, 국내 연구결과에 의하면 도축 후 전기자극 또는 tenderstretch 처리가 한우의 연도 및 육색을 증가시키는 것으로 나타났다. 특히 이 기법들은 도체의 크기 및 지방 침착도와 도축 후 냉각속도 조절이 어려운 국내 축산업 조건에서 연도의 균일성 및 개선을 보장할 수 있는 중요한 기법으로 판단되나, 국내 산업체에서는 이용되지 않고 있다. 이 논문은 이러한 기법에 대한 현재의 이론과 국내 쇠고기 산업에 주는 의미를 서술했다.

가중 평활화 기법을 이용한 GPS L1 단일 주파수 수신기의 상대 측위 정밀도 향상 (THE IMPROVEMENT OF THE RELATIVE POSITIONING PRECISION FOR GPS L1 SINGLE FREQUENCY RECEIVER USING THE WEIGHTED SMOOTHING TECHNIQUES)

  • 최병규;박종욱;조정호;임형철;박필호
    • Journal of Astronomy and Space Sciences
    • /
    • 제21권4호
    • /
    • pp.371-382
    • /
    • 2004
  • GPS 단일 주파수(L1) 수신기의 상대 측위 정밀도 향상을 위해 가중 평활화 기법(weighted smoothing technique)을 적용하고 다양한 기선에 대해 자료 처리를 수행하였다. C/A 코드를 이용한 의사거리의 측정 오차를 최소화하기 위하여 위상 가중 평활화 기법을 활용하였으며, 위상 신호의 끊김 현상으로 인한 결과를 보완하기 위해 위치 평활화 기법을 적용하였다. 대전에 위치한 IGS 기준점을 기점으로 중${\cdot}$장기선(5km, 10km, 30km, 40km, 150km)에 대해 자료 처리를 수행하였으며, 이때 기선에 따라 대기 모델(이온층${\cdot}$대류층)등 추가적인 오차 요인들을 고려하였다. 이 논문은 이러한 가중 평활화 기법을 활용하여 시간이 경과함에 따라 보다 안정적인 결과를 산출할 수 있었음을 제시하고 있으며, 사이클 슬립등 주의 환경에 민감한 오차들은 위치 평활화 기법을 써서 보완할 수 있음을 나타내고 있다. 이러한 결과들을 토대로 가중 평활화 기법을 실시간 응용분야는 물론 후처리 응용분야에도 적용이 가능함을 발견하였고, 이러한 기법들은 반송파 위상 자료를 이용하는 모호 정수 결정기술과 유사한 결과를 산출할 수 있어, 대체 기법으로 활용가능 할 것으로 기대된다.

가상기지국을 활용한 지적기준점 관측 정확도 분석 -진주시 일원을 중심으로- (Accuracy Analysis of Cadastral Control Points Surveying using VRS case by Jinju city parts)

  • 최현;김규철
    • 한국측량학회지
    • /
    • 제30권4호
    • /
    • pp.413-422
    • /
    • 2012
  • 1960년대 GPS가 개발되어 2000년도 미국에서 SA(Selective Availability)를 해제함에 따라 본격적인 상용화가 시작되며 현재에 이르렀다. 개발을 거듭해온 GPS의 관측 방식 중 실시간 이동측량방식은 항상 2대의 수신기가 필요하며 기준국과 이동국의 거리가 멀어짐에 따라 정확도가 떨어지는 문제점이 발생한다. 이러한 개선방안으로 가상기지국 방식이 도입되었다. 가상기지국은 여러 개의 GPS상의 관측소 자료로부터 이동국 인근에 가상점을 생성시켜 이동국의 정밀한 위치를 결정하는 방식이므로 신뢰성과 이동성이 높다. 또한 현재의 지적기준점은 방위각법, 배각법, 다각망도선법 등의 방법으로 관측하여 사용하고 있으며, 측량성과가 서로 다른 기지점의 성과차, 도선의 길이에 대한 제약, 관측시의 여러 오차들로 인하여 문제점들이 많이 발생하고 있다. 따라서 본 연구에서는 상시관측소 데이터를 이용하여 지적기준점에 대하여 가상기지국 방식을 통한 데이터를 비교 분석하였다. 관측결과, 지적기준점을 관측한 토털스테이션을 사용하여 배각법으로 관측한 성과와 VRS-RTK로 관측한 성과를 비교한 결과 X축 평균오차 -0.08m, Y축 평균오차 +0.07m, 평균거리오차 0.11m로 나타났다.

전·후기 노인의 근력과 보행 특성의 관계 (Association between muscular strengths and gait characteristics of elderly people aged 65 to 74 and 75 and above)

  • 백창의;주지용;김영관
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.415-422
    • /
    • 2020
  • 본 연구는 노인을 대상으로 상·하지 근력과 보행을 측정한 후 연령에 따른 차이와 상관관계를 살펴보았다. 2019년 6월~7월 사이 65세에서 85세 사이의 남녀 노인 107명이 측정을 끝까지 마쳤으며 기록된 근력(악력, 발가락력, 중둔근력, 대둔근력)과 보행 특성(보속, 보빈도, 보폭, 외발지지기, 양발지지기)으로 통계 분석을 실시하였다. 상·하지 근력은 악력기, 도수근력측정기, 발가락지력기로 측정하였고 관성센서 기반 보행 측정 신발 시스템으로 보행 자료를 획득하였다. 전기 노인(65~74세)과 후기 노인(75~85세) 사이에 근력과 보행 특성은 차이가 없었다. 전·후기 노인에서 악력, 발가락력, 중둔근력, 대둔근력이 일부 보행 특성과 유의한 상관관계를 보였다(p<.05). 중둔근력과 대둔근력이 두 연령대에서 보행 특성과 유의한 상관관계를 악력이나 발가락력보다 많이 보였다. 보속과 악력의 회귀계수는 전·후기 노인 간에 차이가 없었다. 결론적으로 전기 노인보다 후기 노인에서 근력 요인들이 보행 특성을 더 잘 설명하였다. 또한, 악력은 노인 체력를 손쉽게 측정할 수 있는 변인이지만 보속을 포함한 보행 특성을 설명하는데 중둔근력과 대둔근력이 더 유용할 것이다.

Required Mowing Power and Bale Density of Miscanthus × Giganteus for Field Biomass Harvesting using Different Methods

  • Jun, Hyeon-Jong;Choi, Il-Su;Kang, Tae-Gyoung;Choi, Yong;Choi, Duck-Kyu;Lee, Choung-Keun
    • Journal of Biosystems Engineering
    • /
    • 제39권4호
    • /
    • pp.253-260
    • /
    • 2014
  • Purpose: This study investigated the harvesting properties of the giant miscanthus (Miscanthus ${\times}$ giganteus) to measure the required mowing power for different stem conditioning methods in order to shorten the drying time after mowing and the bale density so that the crop can be used as biomass in the winter season. Methods: The required mowing power and bale density were measured using a power measurement device, three different mower-conditioners, and a mid-sized round baler under different working speeds and conditioning methods. Results: For the various mower-conditioners, the average stem length from mowing was 0.86-0.91 m, and the available working speed was 1.6 m/s. The steel roller-type mower-conditioner showed better stem conditioning but could not mow over a working speed of 1.6 m/s. The required average power of the mower-conditioners varied from 23.8 kW for the steel roller-type rotary disk mower-conditioner with a working width of 2.4 m to 37.2 kW for the flail-type rotary disk mower-conditioner with a working width of 3.2 m at a working speed of 1.6 m/s. The bale densities were $155.8-172.2kg/m^3$. The highest bale density was measured for stems with no conditioning and a moisture content of 11.3% (d.b.) mowed by the rotary disk mower. The bale density was affected by the mowing method because of the low moisture content of the miscanthus stems. Conclusions: In terms of the working performance and conditioning statue, the steel roller-type mower-conditioner is a better choice at a working width of 2.4 m, while the flail finger-type mower-conditioner is better at a working width of 3.2 m. The type of mower-conditioner used for giant miscanthus harvesting should be determined by considering the harvest area, workable period, and working performance of a mower-conditioner and baler during the winter.

UAV 영상을 이용한 무기준점 3D 형상 점군데이터 활용 연구 (A Study on Utilization 3D Shape Pointcloud without GCPs using UAV images)

  • 김민철;윤혁진
    • 한국산학기술학회논문지
    • /
    • 제19권2호
    • /
    • pp.97-104
    • /
    • 2018
  • 최근 UAV(unmanned aerial vehicle)는 기존 측량 장비들을 대체/보완할 수 있는 공간정보 제작 도구로 관련 연구들이 활발히 이루어지고 있다. 본 연구에서는 UAV 영상의 활용도에 주안점을 두어, 재난재해와 같이 긴급한 상황이나 지상기준점 확보가 어려운 지역에서의 활용 가능성을 알아보고자 하였다. 이를 위해 UAV 영상으로 3D(dimensional) 형상을 점군(pointcloud)데이터로 제작하였고, 지상기준점을 사용한 모델 데이터와 무기준점 모델 데이터의 절대적/상대적 정확도를 측정하였다. 실험 결과, UAV 영상매칭으로 생성된 3D 형상 점군데이터는 모델 구성을 위한 상대정확도만 확보되어도, 지상기준점 사용 여부에 관계없이 거리측정과 같은 정량적 측정 오차율이 1% 이내인 것으로 검증되었다. 이는 지상기준점 취득이 불가능하거나 작업의 긴급함이 요구될 때, 절대적 위치정보는 부정확하나 신속하게 후처리한 3D 형상 점군데이터만으로도 그 활용이 충분함을 보여준다. 특히 제안된 연구결과는 재난재해 지역과 같이 데이터의 정확도를 확보하기 위한 지상기준점 설계, 측량, 후처리 등의 제반 작업들이 불가능한 상황에서도 길이와 면적과 같은 정량적 측정치와 의미 있는 결과물 취득이 가능하다.

이미지 왜곡을 줄인 이진 이미지 인증을 위한 정보 은닉 기법 (A Data Hiding Scheme for Binary Image Authentication with Small Image Distortion)

  • 이윤호;김병호
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제36권2호
    • /
    • pp.73-86
    • /
    • 2009
  • 본 연구에서는 삽입되는 정보에 의한 이미지의 왜곡을 최소화하는 이미지 인증을 위한 정보은닉 기법을 제안한다. 제안 방법은 해밍 코드를 이용한 메시지 삽입 방법을 이용하여 적은 화소의 왜곡만으로 많은 양의 인증 정보의 삽입이 가능하다. 또한 정보 삽입으로 인한 이미지 영역의 훼손을 줄이기 위해 Yang 등이 제안한 변조 가능 기준(flippablity criteria)에 의해 선택된 변조 가능 화소(flippable pixel) 만을 정보 삽입에 사용한다. 마지막으로, 인증 정보가 각 변조 가능 화소에 삽입되는 순서를 은폐함으로써, 적법한 검증자가 아닐 경우, 이미지로부터 인증 정보를 추출해 내기 어렵게 한다. 제안 방법의 우수성을 보이기 위해, 기존 연구들과 반전되는 화소의 수, 오합율에 대하여 비교 분석을 수행하며 그 결과로써 제안 방법이 적은 양의 화소값의 변화만으로 매우 낮은 오탐율을 보장함을 보인다. 이에 부가하여, 다양한 이진 이미지에 대해 제안 방법과 Yang 등의 방법을 적용하여 정보를 삽입하는 실험을 수행한다. 실험 결과에 대한 이미지 영역 분석을 통해 제안 방법이 이전의 방법보다 적은 왜곡을 갖게 됨을 보이고, 최근에 제안된 이진 이미지 정보 은닉 방법에 대한 공격에도 이전의 방법들보다 좀 더 안정성이 있음을 보인다.

고속주행시 철도터널내 공기압 특성에 관한 기초연구 - 미기압(MPW)을 중심으로 (A study on the characteristics for aerodynamics at high speed in railway tunnels - focused on the micro pressure wave)

  • 김효규;최판규;유지오
    • 한국터널지하공간학회 논문집
    • /
    • 제16권2호
    • /
    • pp.249-260
    • /
    • 2014
  • 열차가 고속으로 터널을 진입할 때 압축파가 발생하게 된다. 이 압축파가 터널 출구부에 도달하면 일부는 외부로 방출되고 일부는 팽창파의 형태로 반사되어 터널내부로 전파된다. 이러한 파는 충격파의 형태로 외부로 방출되는데, 이를 미기압(micro pressure wave)이라고 한다. 미기압파는 터널 출구부에 소음 및 진동문제를 일으키며, 이 현상이 클수록 민가 및 주변 유리창에 손상과 거주자의 불안을 일으키는 원인이 된다. 따라서 고속철도 건설을 위해서는 미기압에 대한 대책과 이에 대한 예측이 필요한 실정이다. 이에 본 연구는 운영중인 터널에서의 미기압 측정사례와 터널내 압력기울기에 대한 수치해석을 통하여, 차량의 전두부 형상 및 터널 갱구부 형상에 따른 영향을 분석하였다. 그 결과로, 본 연구에서는 미기압파의 강도를 예측하는 방법을 제시하였으며, 이를 통해서 터널 연장과 단면적에 따른 미기압 강도를 해석하였다.

Predicting Parturition Time through Ultrasonic Measurement of Posture Changing Rate in Crated Landrace Sows

  • Wang, J.S.;Wu, M.C.;Chang, H.L.;Young, M.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권5호
    • /
    • pp.682-692
    • /
    • 2007
  • This study presents an automatic system to predict parturition time in the crated sows. The system relies on ultrasonic transducers mounted from above along the length of the crate. Using a 40 kHz time of flight (TOF) single envelope wave, the momentary distances between the sensors are measured. Therefore, the local momentary height of the sow and the momentary posture, i.e. standing posture (SDP), kneeling posture (KP), sitting posture (STP) and lateral lying posture (LLP) are determined. Crated sows change their postures from standing to lying and vice versa which follows a characteristic pattern. As parturition approaches, sows exhibit uneasiness, restlessness and the stand up sequence (SUS, the posture transition from LLP to SDP) rate increases because of labor pains. In time series, the SUS rate demonstrates a peak and it happens approximately 0-12 h before parturition. In this paper, the basic parturition threshold value method (BPTVM) and the same hour method (SHM) are proposed for predicting parturition, both of which are based on the SUS rate. The BPTVM mainly detects the peak of the SUS rate. As the SUS rate exceeds the threshold value, the parturition becomes predictable. Moreover, the SHM calculates the difference in the SUS rates between a particular time of day and the corresponding time of the preceding day. Compared to the BPTVM, the SHM can eliminate the circadian rhythm of the SUS rate influenced by feeding behavior. Using the SHM the parturition can be approximately predicted within hours. In an attempt to define the threshold parameters of predicting parturition, a data set with 32 sows of the SUS rate are used to estimate assumable predicting probability. The results show the assumable probability of the parturition prediction within 9 h is 96.9% for the SHM and 84.4% for the BPTVM. Moreover, the SHM can even reach a 75% probability of prediction within three hours of parturition. We conclude that the SHM is more accurate and is more useful for parturition time prediction. When parturition is detected, the proposed algorithm generates a warning signal which can inform human personnel to protect the mother and newborn piglets.

Modeling Age-specific Cancer Incidences Using Logistic Growth Equations: Implications for Data Collection

  • Shen, Xing-Rong;Feng, Rui;Chai, Jing;Cheng, Jing;Wang, De-Bin
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권22호
    • /
    • pp.9731-9737
    • /
    • 2014
  • Large scale secular registry or surveillance systems have been accumulating vast data that allow mathematical modeling of cancer incidence and mortality rates. Most contemporary models in this regard use time series and APC (age-period-cohort) methods and focus primarily on predicting or analyzing cancer epidemiology with little attention being paid to implications for designing cancer registry, surveillance or evaluation initiatives. This research models age-specific cancer incidence rates using logistic growth equations and explores their performance under different scenarios of data completeness in the hope of deriving clues for reshaping relevant data collection. The study used China Cancer Registry Report 2012 as the data source. It employed 3-parameter logistic growth equations and modeled the age-specific incidence rates of all and the top 10 cancers presented in the registry report. The study performed 3 types of modeling, namely full age-span by fitting, multiple 5-year-segment fitting and single-segment fitting. Measurement of model performance adopted adjusted goodness of fit that combines sum of squred residuals and relative errors. Both model simulation and performance evalation utilized self-developed algorithms programed using C# languade and MS Visual Studio 2008. For models built upon full age-span data, predicted age-specific cancer incidence rates fitted very well with observed values for most (except cervical and breast) cancers with estimated goodness of fit (Rs) being over 0.96. When a given cancer is concerned, the R valuae of the logistic growth model derived using observed data from urban residents was greater than or at least equal to that of the same model built on data from rural people. For models based on multiple-5-year-segment data, the Rs remained fairly high (over 0.89) until 3-fourths of the data segments were excluded. For models using a fixed length single-segment of observed data, the older the age covered by the corresponding data segment, the higher the resulting Rs. Logistic growth models describe age-specific incidence rates perfectly for most cancers and may be used to inform data collection for purposes of monitoring and analyzing cancer epidemic. Helped by appropriate logistic growth equations, the work vomume of contemporary data collection, e.g., cancer registry and surveilance systems, may be reduced substantially.