• Asian-Australasian Journal of Animal Sciences
• /
• 제31권10호
• /
• pp.1575-1580
• /
• 2018

Objective: This study was conducted to estimate the genetic parameters and breeding values of breast meat related traits of Pekin ducks. Selection response was also determined by using ultrasound breast muscle thickness (BMT) measurements in combination with bosom breadth (BB) and keel length (KL) values. Methods: The traits analyzed were breast meat weight (BMW), body weight (BW), breast meat percentage (BMP) and the three parameters of breast meat (BB, KL, and BMT). These measurements were derived from studying 15,781 Pekin ducks selected from 10 generations based on breast meat weight. Genetic parameters and breeding value were estimated for the analysis of the breeding process. Results: Estimated heritability of BMW and BMP were moderate (0.23 and 0.16, respectively), and heritability of BW was high (0.48). Other traits such as BB, KL, and BMT indicated moderate heritability ranging between 0.11 and 0.28. Significant phenotypic correlations of BMW with BW and BMP were discovered (p<0.05), and genetic correlations of BMW with BW and BMP were positive and high (0.83 and 0.66, respectively). It was noted that BMW had positive correlations with all the other traits. Generational average estimated breeding values of all traits increased substantially over the course of selection, which demonstrated that the ducks responded efficiently to increased breast meat yield after 10 generations of breeding. Conclusion: The results indicated that duck BMW had the potential to be increased through genetic selection with positive effects on BW and BMP. The ultrasound BMT, in combination with the measurement of BB and KL, is shown to be essential and effective in the process of high breast meat yield duck breeding.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.354-360
• /
• 2020

본 연구는 잡곡(조, 기장, 수수)의 물리적 특징 중 기하학적 특성, 산물밀도 및 종말속도를 함수율별로 분석하여 미곡가공시설의 선별 장치를 이용하여 잡곡의 선별의 가능성을 위한 기초자료로 활용하기 위하여 연구를 수행하였다. 조, 기장 및 수수의 초기함수율은 16.3, 19.8, 16.5 %(w.b.)로 나타났다. 잡곡은 5수준으로 건조하여 실험에 사용하였다. 잡곡의 기하학적 특성 중 원형율을 제외하고 단축, 장축 및 면적은 함수율이 높을수록 증가하는 것으로 나타났으며, 1차식 실험모델로 모두 표현이 가능하였다. 산물밀도는 조 및 기장은 함수율이 높을수록 증가하는 것으로 나타났으나 수수의 경우는 함수율과 무관하였다. 종말속도는 함수율이 높을수록 종말속도가 증가하는 것으로 나타났으며, 1차식 실험모델로 표현이 가능하였다. 잡곡별 측정한 물리적 특성은 함수율의 변화에 따른 1차식 실험모델로 표현이 가능하였으며, 기존 미곡선별장치를 이용할 경우 종말속도를 이용하는 장치는 사용이 가능하지만 기하하적 특성 및 산물밀도를 이용하는 공정은 잡곡에 따라 전용 공정의 설계가 별도로 필요하였다.

• 대한간호학회지
• /
• 제30권2호
• /
• pp.319-330
• /
• 2000

This study is aimed at analyzing the trend of research on the use of exercise in nursing research, through suggesting directions for future research and implementation of the various exercise therapies. Research studies were taken from dissertations and theses selected from the Academic Society Journals of nursing science, Journals from universities, medical and nursing schools, research institutes in various universities, the Central Journal of Medicine, and the New Medical Journal. The research published between 1970 and 1997 in Korea were analyzed, 51 research were selected. The research are analyzed according to: published time, source of the research, research design, subjects, sample size, dependant variables, exercise therapy, and effect of exercise therapy. The results were as follows: 1. Research on exercise therapy increased rapidly in the 1990's. At this time, 88.2% of research was published. 2. Research areas included: 54.9% non- degree research, 27.5% Doctoral theses, and 17.6% Master's theses. 3. The experimental design included: 66.7% non- equivalent control group pre-test/ post-test design and 29.4% one group pre-test/post- test design. 4. Out of the Subjects: 52.9% were patients with various health problems, and 47.1% were healthy individuals. 5. Sample size included: 52.9% with above 31 subjects, 11.8% with 11~15 and 26~30. 6. Exercise therapy was analyzed by type, intensity, frequency, duration, and period. 1) The Types: Aerobic exercise at 60.8% was the most common, active exercise for muscle strengthening and building made up 21.6%. 2) Exercise with 40~65% intensity comprised 25.5%, 70~85% with 7.8%, and no description of the intensity was 66.7%. 3) Frequency of 3~5 per week was the most common at 78.4%. 4) Duration: 15~60 minutes was the most common length of time at 76.5%. 5) Periods: More than 5 weeks at 82.3% were the most common in their categories. 7. Dependant variables: Psychological response was measured as a dependant variable in 92.2%, Cardio-pulmonary function 88.2%, Body Composition was 86.3%, Physical Response was 60.8%, Lipid Metabolism was 58.8%, Physical Strength was 49.0%, Glucose Metabolism was 25.5%, Activities of Daily Living was 17.6% and others added to be 3.9%. 8. The effect of Exercise Therapy was categorized into 'positive', 'partially positive', and 'no effect' according to dependant variables: Having a positive effect - Glucose Metabolism (93.3%), Physical Response (85.0%), Activities of Daily Living (81.8%), Psychological Response (71.6%), Lipid Metabolism (67.6%), Cardio- pulmonary Function (63.6%), Physical Strength (68.1%), and Body Composition (56.4%). The following suggestions can be made on the above findings: 1. Research findings on Exercise Therapy as a Nursing Intervention need to be described by their elements of type, intensity, frequency, duration and period. 2. Toproperly study the positive effects of Exercise Therapy, there needs to be ⑴ appropriate research design, ⑵ selection criteria for the subjects ⑶ contents of exercise prescription to individuals or groups ⑷ measurement criterion for the dependent variables. 3. Meta-analysis on exercise therapy also needs to be done to analyze and integrate the various results.

• Journal of Nutrition and Health
• /
• 제40권4호
• /
• pp.385-394
• /
• 2007

The purpose of this study was to determine the zinc status of preschool children in Ulsan. The study was conducted in 95 children aged 3 to 6 years by investigating the anthropometric indices and assessing the biochemical analysis. The blood was analysed to assess serum zinc and alkaline phosphatase. And a questionnaire for dietary intakes using 24-hr recall method were performed by mothers of 95 subjects. The dietary intakes of children were analysed to determine the prevalence of inadequate and excessive intakes of zinc with Dietary Reference Intakes for Koreans (KDRIs). WHL (Weight-Length Index) and Kaup index were used to define obesity. The overall prevalence of overweight and obese subjects were 14.7% and 6.3% by WHL, were 15.8% and 13.7% by Kaup index. The mean intakes of zinc by children aged 3${\sim}$5y and 6y were 5.5 ${\pm}$ 1.4 mg/d (75.7% RDA) and 6.7 ${\pm}$ 2.0 mg/d, respectively, that was the level exceeding the estimated average requirement (EAR) and the recommended intake (RI) of Korean Dietary Reference Intakes. Less than 1.3% and 7.9% of children had usual zinc intakes below EAR and RI of KDRIs, respectively. The percentages of children with intakes exceeding the tolerable upper intake level (UL) were 2.6%. The zinc nutritional status by biological assay was found that mean serum zinc and alkaline phosphatase (ALP) of total subjects were 64.0 ${\pm}$ 8.4 ${\mu}$g/dl and 72.8 ${\pm}$ 14.9 U/L, there was not a significant difference between boys and girls. The range of serum zinc level was 45${\sim}$89 ${\mu}$g/dl and children with a low serum zinc concentration by several cut-off points were 18.9${\sim}$55.8%, especially. Serum zinc level was positively correlated to the intakes of calorie, calcium, fiber, iron, zinc, zinc/kg and height (p<0.001). Serum ALP was positively correlated height, weight and WLI. The zinc intake of children aiso showed a positive correlation with height and weight. These results indicate that there were significant correlations between the zinc status and growth of preschool children. Preschool children in Ulsan have dietary zinc intakes that exceed the new DRIs. The present level of intake does not seem to pose a health problem, but if zinc intakes with fortified foods and supplements were considered, the amount of zinc consumed by children may become excessive.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.537-541
• /
• 2003

강유전체(SrTiO$_3$) 박막을 게이트 절연층으로 하여 수소화 된 비정질 실리콘 박막 트랜지스터를 유리 기판위에 제조하였다. 강유전체는 기존의 SiO$_2$, SiN 등과 같은 게이트 절연체에 비하여 유전특성이 매우 뛰어나 TFT의 ON 전류를 증가시키고 문턱전압을 낮추며 항복특성을 개선하여 준다. PECVD 에 의하여 증착된 a-Si:H 는 FTIR 측정 결과 2,000 $cm^{-}$1 과 635 $cm^{-}$l 및 876 cm-1 에서 흡수 밴드가 나타났으며, 2,000 $cm^{-1}$ / 과 635 $cm^{-1}$ / 은 SiH$_1$ 의 stretching 과 rocking 모드에 기인 한 것이며 876 $cm^{-1}$ / 의 weak 밴드는 SiH$_2$ vibration 모드에 의한 것이다. a-SiN:H 는 optical bandgap 이 2.61 eV 이고 굴절률은 1.8 - 2.0, 저항률은 $10^{11}$ - $10^{15}$ $\Omega$-cm 정도로 실험 조건에 따라 약간 다르게 나타난다. 강유전체(SrTiO$_3$) 박막의 유전상수는 60 - 100 정도이고 항복전계는 1MV/cm 이상으로 우수한 절연특성을 갖고 있다. 강유전체를 이용한 TFT 의 채널 길이는 8 - 20 $\mu$m, 채널 넓이는 80 - 200 $\mu$m 로서 드레인 전류가 게이트 전압 20V에서 3 $\mu$A 이고 Ion/Ioff 비는 $10^{5}$ - $10^{6}$, Vth 는 4 - 5 volts 이다.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.730-740
• /
• 1999

The purpose of this study was to investigate setting and thermal expansion of dental soldering investments. In order to compare expansion rates and to investigate the effect of water/powder ratio on expansion, setting and thermal expansion of low dental soldering investments were measured under three different water/powder ratio conditions. standard, 20% decreased and 20% increased. Setting expansion of investments was measured by use of dialgauge method. Each measurement was started two minutes later from the beginning of spatulation and recorded every one minute for one hour. Thermal expansion of cylindrical test specimens, 10mm diameter, 50mm length, was recorded in a thermodilatometer at heating rate of $10^{\circ}C$ per minute from $25^{\circ}C\;to\;700^{\circ}C$. The results of this study were obtained as follows: 1. Setting expansion rates under the standard water/powder ratio condition were 0.198% in Speed-E, 0.090% in Deguvest, 0.080% in CM and Hi-temp. Setting expansion of Speed-E was significantly different from those of CM, Deguvest and Hi-temp, and setting expansion of Deguvest was significantly different from those of CM and Hi-temp(p<.05). 2. Under the decreased water/powder ratio condition, there was significant increase in setting expansion of 4 dental soldering investments (p<.05). 3. There were no significant differences in setting expansions of investments except Hi-temp between standard and increased water/powder ratio condition(p<.05). 4. Thermal expansion rates under the standard water/powder ratio condition were 1.923% in Deguvest, 1.629% in Speed-E, 1.619% in Hi-temp and 1.580% in CM. No significant differences in thermal expansions under the standard water/powder ratio condition existed only between Speed-I and Hi-temp(p<.05) 5. Under the decreased water/powder ratio condition, there was significant increase in thermal expansion of CM and Deguvest but decrease in thermal expansion of Speed-E (p<.05). 6. Under the increased water/powder ratio condition, there was significant decrease in thermal expansion of CM, Deguvest and Speed-I but decrease in thermal expansion of Hi-temp(p<.05).

• 대한디지털의료영상학회논문지
• /
• 제11권2호
• /
• pp.115-119
• /
• 2009

I think this will be valuable reference for assuring consistency and homogeneity of clarity and managing dental radiation equipment by experimentation of dental radiation equipment permanent which based on KS C IEC 61223-3-4 standard and KS C IEC 61223-2-7. Put a dental radiation generator and experiment equipment as source and film(sensor) length within 30 em, place the step-wedge above the film(sensor). Tie up tube voltage 60 kVp, tube current 7 mA and then get an each image through CCD sensor and film by changing the exposure time as 0.12sec, 0.25sec, 0.4sec. Repeat the test 5times as a same method. Measure the concentration of each stage of film image, which gained by experiment, using photometer. And the image that gained by CCD sensor, analyze the pixel value's change by using image J, which is analyzing image program provided by NIH(National Institutes of Health). In case of film, while 0.12sec and 0.25sec show regular rising pattern of density gap as exposure time's increase, 0.4sec shows low rather than 0.12sec and 0.25sec. In case of CCD sensor density test, the result shows opposite pattern of film. This makes me think that pixels of CCD's sensor can have 0~255 value but it becomes saturation if the value is over 255. The way that getting clear reception during decreasing human's exposed radiation is one of maintaining an equipment as a best condition. So we should keeping a dental radiation equipment's condition steadily through cyclic permanent test after factor examination. Even digital equipment doesn't maintain a permanent, it can maintain a clarity by post processing of image so that hard to set it as standard of permanent test. Therefore it would be more increase the accuracy that compare a film as standard image. Thus I consider it will be an important measurement to care for dental radiation equipment and warrant homogeneity, consistency of dental image's clarity through comparing pattern which is the result from factor test against cyclic permanent test.

• 한국의상디자인학회지
• /
• 제17권2호
• /
• pp.155-172
• /
• 2015

This study analyzed the change pattern of Korean male body size in their 40s-60s and their current body shape based on the research materials of the 5th(2004) and 6th(2010) conducted by Size Korea. The purposes of this study are to make the related fashion industry recognize the changes of Korean male body size in their 40s-60s and suggest basic materials for clothing design that reflects such trend. As a result of analyzing changes of male body size in their 40s-60s by age, it was found that height, length, breadth and weight decreased across most of the items as the age increased. As for circumference, as the age increased, waist circumference (natural indentation), waist circumference (omphalion), and abdominal extension circumference increased, while other items decreased. In relation to the depth, as the age increased, hip depth and armscye depth decreased, while chest depth, bust depth, waist depth (natural indentation), and waist depth (omphalion) increased. Analyzing the change pattern of Korean male body size in their 40s-60s according to measurement year, height size increased in the 6th year across most of the body part items compared to the 5th year. It means that height of body parts related to body height increased in overall. As for circumference, most items showed decrease, which means that Korean male's body shape in their 40s-60s gets slim gradually. While the breadth of the chest decreased, the depth of the chest increased. which is assumed due to the increase in exercise according to high interest in health in a society. It will be possible to design proper clothes for consumer body type and trends if we design clothes that afford multilateral attention to the patterns, design, or material in clothing design by applying the aspects of Korean male body size in their 40s-60s and body type change.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 춘계학술발표회 논문집
• /
• pp.51-68
• /
• 2008

고속열차의 터널 진입시 발생하는 압력파는 압축파의 형태로 터널내부를 전파하여 터널출구에 도달할 때에는 펄스형태의 충격성 압출파로 방사된다. 터널에서 방사된 압축파는 특정한 방향으로 전파되는 것이 아니라 전방향으로 확산되며, 압축파의 크기가 크면 주변 환경에 대한 환경소음 및 진동문제를 야기하게 되는데, 이를 미기압파(Micro Pressure wave)라 한다. 이러한 미기압파는 열차의 주행속도, 터널연장, 터널 및 열차의 단면적 등에 의존하므로 고속철도 터널의 적정단면을 결정하기 위하여 반드시 고려해야 된다. 이에, 본 논문에서는 호남고속철도 단면결정사례를 통하여 단면규모별 수치해석결과에 의한 미기압 기준 만족여부 및 최적단면선정과정을 소개하였다. 호남고속철도의 단면결정사례에서는 경부고속철도 화신 5 터널에서 터널내 압력 및 터널 출구에서의 미기압을 실측하여, 수치시뮬레이션의 입력조건으로 사용된 각종 매개변수 등의 적정성을 비교 검증하였으며, 모형실험을 통하여 합리적인 미기압과 저감대책을 제시하였다.