• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.937-954
• /
• 2010

This study analyzes the body characteristics of Korean obese women using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen from previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects for this study. 54 body measurements and obesity judgment indices were used. First, the subjects had a BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, and WHR 0.90. In the case of the distribution by age groups, the twenties were 6.4% of the entire subjects, the thirties were 18.2%, the forties were 16.4%, the fifties were 37.4%, and the sixties were 21.5%. The result of the ANOVAs (divided into 5 age groups) showed significant differences in 41 measurement items except for bust circumference, waist length front, and all of obesity judgment indices. Second, according to the ANOVAs among stature groups divided by 5cm pitches there are significant differences in all measurements except for bust circumference. The results of the ANOVAs among bust circumference groups divided by 5cm pitches show that significant differences were observed in all measurements except four measurement items (including body rise). According to the ANOVAs among the waist circumference groups divided by 5cm pitches, there are no significant differences in all height measurements and shoulder length, waist to hip length, and crotch length. It is confirmed that stature and bust circumference have a deep relationship with measurements other than waist circumference. Third, as the factor analysis were conducted using 39 measurement items to extract the body characteristics of obese women Factor 1 is "circumference measurements & obesity judgment indices," Factor 2 is "heights & arm-related lengths," and Factor 3 is "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences," and Factor 8 was "neck base circumference & front widths in upper body." These 8 factors explained 76.54% of the total variance.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.441-447
• /
• 2017

Objective : Computed tomography (CT)-based method of three dimensional (3D) analysis ($MIMICS^{(R)}$, Materialise, Leuven, Belgium) is reported as very useful software for evaluation of OPLL, but its reliability and reproducibility are obscure. This study was conducted to evaluate the accuracy of $MIMICS^{(R)}$ system, and inter- and intra-observer reliability in the measurement of OPLL. Methods : Three neurosurgeons independently analyzed the randomly selected 10 OPLL cases with medical image processing software ($MIMICS^{(R)}$) which create 3D model with Digital Imaging and Communication in Medicine (DICOM) data from CT images after brief explanation was given to examiners before the image construction steps. To assess the reliability of inter- and intra-examiner intraclass correlation coefficient (ICC), 3 examiners measured 4 parameters (volume, length, width, and length) in 10 cases 2 times with 1-week interval. Results : The inter-examiner ICCs among 3 examiners were 0.996 (95% confidence interval [CI], 0.987-0.999) for volume measurement, 0.973 (95% CI, 0.907-0.978) for thickness, 0.969 (95% CI, 0.895-0.993) for width, and 0.995 (95% CI, 0.983-0.999) for length. The intra-examiner ICCs were 0.994 (range, 0.991-0.996) for volume, 0.996 (range, 0.944-0.998) for length, 0.930 (range, 0.873-0.947) for width, and 0.987 (range, 0.985-0.995) for length. Conclusion : The medical image processing software ($MIMICS^{(R)}$) provided detailed quantification OPLL volume with minimal error of inter- and intra-observer reliability in the measurement of OPLL.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2024

Overfishing, climate change, and competitive fishing have led to a continuous decline in fishery production. To address these issues, the Total Allowable Catch (TAC) system has been established, which sets annual catch quotas for individual fish species and allows fishing only within those limits. As part of the TAC system, land-based investigators measure the length and height of fish species at auction markets to calculate the weight and TAC depletion. However, the accuracy of the acquired data varies depending on the skill level of the land-based investigators, and the labor-intensive nature of the work makes it unsustainable. To address these issues, this paper proposes a fish species recognition and length measurement system that automatically measures the length, height, and weight of eight TAC-managed fish species using the camera of a smart pad that can measure the distance to the water surface. This system can help to automate the current labor-intensive work, minimize data loss, and facilitate the establishment of the TAC system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1470-1481
• /
• 2004

The purpose of this study was to research on facial shape to suggest a quantified data for the domestic apparel and beauty industry. Conducted a measurement research of 278 female college students, We took the photographs of front view and lateral view of the subjects by digital camera and obtained the 69 measurements through the facial measurement program. 264 ,subjects' measurement data were analyzed by various statistical methods such as descriptive analysis, factor analysis and cluster analysis. Using the 69 measurement items,4 factors were selected as key factors for the factor analysis of facial shape, the factors are: \circled1 Front face height \circled2 Side face radial length \circled3 Front face breadth \circled4 Ear height and Gnathion radial length. We categorized the facial shape into four types by cluster analysis. Type 4 is the most common facial shape in female college students: \circled1 Type 1: Round face \circled2 Type 2: Oval face \circled3 Type 3: Square face \circled4 Type 4: Heart shaped face According to the facial shape analysis, facial shape of female college students are consisting of Heart shaped face(34.8%), Round face(29.2%), Square face(23.5%), oval face(12.5%).

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.191-197
• /
• 2017

Light detection and ranging (LiDAR) is one of the most efficient technologies to obtain the topographic and bathymetric map of coastal zones, superior to other technologies, such as sound navigation and ranging (SONAR) and synthetic aperture radar (SAR). However, the measurement results using LiDAR are vulnerable to environmental factors. To achieve a correspondence between the acquired LiDAR data and reality, error sources must be considered, such as the water surface slope, water turbidity, and seafloor slope. Based on the knowledge of those factors' effects, error corrections can be applied. We concentrated on the effect of the seafloor slope on LiDAR waveforms while restricting other error sources. A simulation regarding in-water beam scattering was conducted, followed by an investigation of the correlation between the seafloor slope and peak timing of return waveforms. As a result, an equation was derived to correct the depth error caused by the seafloor slope.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.123-130
• /
• 2015

Purpose : The purpose of this study was to investigate the reliability of 3D-inertia measurement unit (IMU) based shoes in gait analysis. This was done with respect to the results of the optical motion capturing system and to collect reference gait data of healthy subjects with this device. Methods : The Smart Balance$^{(R)}$ system of 3D-IMU based shoes and Osprey$^{(R)}$ motion capturing cameras were used to collect motion data simultaneously. Forty four healthy subjects consisting of individuals in 20s (N=20), 40s (N=13), and 60s (N=11) participated in this study voluntarily. They performed natural walking on a treadmill for one minute at 4 different target speeds (3, 4, 5, 6 km/h), respectively. Results : Cadence (ICC=.998), step length (ICC=.970), stance phase (ICC=.845), and double-support phase (ICC=.684) from 3D-IMU based shoes were in agreement with results of optical motion system. Gait data of healthy subjects according to different treadmill speeds and ages were matched to previous literature showing increased cadence and reduced step length for elderly subjects. Conclusion : Conclusively, 3D-IMU based shoes in gait analysis were a satisfactory alternative option in measuring linear gait parameters.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.749-758
• /
• 2017

The purpose of the present study is to develop a grading deviation, which is appropriate for the body type of women in thirties, by analyzing the three-dimensional body type. The materials for the study were adopted from the body measurement data of women in the age group of 30 to 39 years old, provided from Size Korea. By reflecting the factor analysis results using the three-dimensional shape measurement, deviations were derived. First, six factors influencing the changes in human body shape were derived as waist-hip length factor, bust-waist shape factor, back protrusion back shoulder factor, bust length factor, shoulder length factor, and frontal waist dart factor. The bust size and height, which can be easily utilized for the top original grading, were used for deriving a regression formula, and the deviation was set in accordance with the result. Second, by applying the deviation which reflects the changes in the body shape, the crimps which were generated due to the application of existing deviation were remarkably reduced, indicating that the grading of the present study is more fitting than the existing one. The deviation derived by the analysis of actual increase and decrease of body size was more fitting than the existing one. This was proved by actual wearing experiment, which represents the significance of this study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.600-603
• /
• 2009

Genetic and phenotypic parameter estimates for measurement traits were obtained from pacific oyster Crassostrea gigas at nine months old. For the growth-related traits among nine months old pacific oyster, heritabilities of shell length, shell height, shell width, total weight, body weight and shell weight were estimated as 0.4855, 0.5248, 0.0884, 0.7236, 0.7726 and 0.6957, respectively. Genetic correlations among the growth-related traits of pacific oyster at nines month old, shell length, shell height, shell width, total weight, body weight, shell weight were showing highly positive correlations. Breeding value on growth-related traits of pacific oyster at nine months old were estimated as shell length -7.044-11.870, shell height -11.380-18.370, shell width -1.234-2.831, total weight -8.339-17.140, body weight -1.813-3.507 and shell weight -4.422-8.837. The results show that there is quite substantial additive genetic variance for measurement traits in pacific oyster that can be exploited through selective breeding.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.757-768
• /
• 2004

This study was aimed to provide the fundamental and various measurement data of the head and face for Korean children. Two hundred sixty nine female children, aged nine to twelve years, participated for this study. The 28 regions on the head and face of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed' using these data. Through factor analysis, six factors were extracted upon factor scores and those factors comprised 71.42% for the total variances. Four clusters as their head and face shape were categorized using six factor scores by cluster analysis. Type 1 was characterized by the shorter head & face length and width and the lowest position from forehead to nose. Type 2 had the longer head & face length and width and the highest ear position and the largest mouse width. Type 3 was characterized by the longest and head & face type and the widest head & face girth. Type 4 was characterized by shortest head & face length the lower ear and lips position.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.449-454
• /
• 1994

The Stewart Platform is one example of a motion simulator which generater 6DOF motion in space by six actuators in parallel. The presented control methrol of 6DOF motion simulator is generally classified into two types, one is SISO and the other is MIMO control type. The SISO control can't compensate for external load variation and different dynamic behavior of 6DOF motion, trerefore this type don's control motion precisely. On the other hand, the MIMO control compensates for a interference of 6DOF motion because MIMO controller is designed with 6DOF motion simulator synamics. But MIMO control of motion simulator has a complexity of 6DOF displacement feedback, because in oder to obtain feedback value we must solve the forward kinematics using measurement of cylinder length or design a state estimator, unless measurement of 6DOF displacement is possible. In this paper, a multivariable controller using H .inf. optimal control theory is designed to consider a interference of 6DOF motion and to obtain robust,precise control of system. Also in order to solve the mentioned problem of MIMO control, this paper presents a modified MIMO control model which control 6DOF motion by using feedback of measurement od cylinder length.