• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• 한국의류학회지
• /
• 제15권2호
• /
• pp.151-162
• /
• 1991

The purpose of this study was to examine the point at issue unfitness and unclassification in figures for clothing construction. Comparing measurements of 3 sold figures and physical body by Suck·Go method and 19 items were selected. These items were acquired by factor analysis and cluster analysis an measurements of 200 women in twenties. The results were as follows; 1. Comparison between measurement of figures and physical body; There was not so much difference among figures, but significant difference between figures and physical body. 2. Comparison between measurement of surface area of figures and physical body; There was similar to each figure, but significant difference between figures and physical body. Mostly, figures were bigger than physical body in front parts but smaller in back parts. 3. There were 8 items selected by factor analysis; That is bust girth, waist girth, hip girth, neck base girth, posterior waist length, bust point length, chest breadth and armscye girth. 4. There were 7 clusters selected by cluster analysis.

• 복식
• /
• 제53권1호
• /
• pp.117-128
• /
• 2003

For the advance of Korea's ready-made clothes industry into China, we need some information about the body types of the Chinese and the sizes of ready-made clothes. The purpose of this study is to prepare basic data about the reality and process of the size establishment of clothing sizes in China. The conclusions are as follows. 1. Clothing size establishment was made three times in 1981, 1991, and 1997. At present, the version of 'GB/T 1335-1997 Size' is used. 2. 'GB/T 1335-1997 Size' is composed as follows. \circled1 Based on the drop values of chest girth and waist girth, 4 (Y. A, B, C) body types of adult men and women were chosen. \circled2 Sizes contains Ho and Hyoung, 'Ho' refer to height (cm) and serve as the standard of length, while 'Hyoung' indicate chest girth (cm) and act as the standard of girth. \circled3 The size divisions of the 3 basic items for adults are 5cm (height), 4cm (chest girth), and 2cm (waist girth). So they are named '5ㆍ4, 5ㆍ2 size series', \circled4 For grading in dress production, approximate values to the means of the 2 basic items are called 'center types'.\circled5 Other necessary items for clothing design besides 3 basic items are named 'control items'. \circled6 For babies, children, and adolescents, no body type classification is established. Instead, size series are established according to body height.

• 패션비즈니스
• /
• 제7권4호
• /
• pp.78-92
• /
• 2003

The upper-body characteristics of the right-handed and the left-handed are examined and compared through 1-dimensional measurement and 2-dimensional measurement. The results were as follows: 1. According to 1-dimensional measurement results, the clearest differences were seen in girth items rather than height or length items. In particular, hand girth, lower arm girth, and upper arm girth were bigger on the left side in the left-handed group and the right side in the right-handed group. This is thought to be relevant to the arm muscles frequently used. 2. According to 2-dimensional measurement results, significant differences appeared in the females of the left-handed group: shoulder point among width items. In the right-handed group, some differences of significance were shown in females (shoulder point, rear armpit point, and B.P. point among width items) and males (front neck point among extreme vertical distance items). In summary, the body type characteristics of the left-handed and the right-handed reveal great differences in the items related to arm length and arm girth. In other words, the sleeve and shoulder patterns production based on the right-handed don't rightly reflect the somatotype characteristics of the left-handed. In addition, in the cases of athletes, laborers, and the disabled who frequently use particular muscles or parts of the body, this sort of research in the patterns is consistently needed in order to reflect the size differences in girth items in upper body.

• 대한가정학회지
• /
• 제20권4호
• /
• pp.1-12
• /
• 1982

This study was to investigate the changes of shape of the lower limb surface, the rate of the measurement of expansion and contraction and correlation coefficient between variables caused by hip joint and knee joint movements. The results of the investigation are as follows; 1. According to the development figure of shell when the leg was raised $45^{\circ}$forward($M_{2}$), total length of F.L shortened while B.L lengthened. This result is contarary to $M_{3}$raising the leg $15^{\circ}$ backward. In both $M_{2}$, $M_{3}$movements, the rate of expansion and contraction to the course direction was insignificant. When hip joint was bent $15^{\circ}$ with knee joint $120^{\circ}$bent ($M_{4}$) and hip joint was bent $30^{\circ}$ with knee joint $90^{\circ}$ bent($M_{5}$), upper section of back hip expanded while the front hip section contracted slightly. In the Movement of sitting on the chair($M_{6}$), abdomen, front hip section and upper thight section contracted to the wale direction remarkably while the back hip section expanded conspicuously. 2. According to the rate of expansion and contraction of skin (surface) by the somatometry. In $M_{2}$, C.F.L. upper and middle thight girth contracted and B.L, C.L, L.L expanded. This fact is contarary to M3. In M4, M5, C.F.L showed remarkable contraction and C.B.L expanded remarkably. In $M_{6}$, C.B.L contracted most of all the items measured and knee girth, F.L, L.L, C.B.L, hip girth expanded conspicuously. 3. According to the correlation coefficient between variables. In various movements, the correlation among girth items commonly showed a high or middle grade, the correlation among length items also commonly showed a low grade and that girth and length items showed a very low grade commonly. Waist girth, hip grith, F.L, B.L, L.L items showed that there were significant correlation.

• 복식
• /
• 제67권3호
• /
• pp.81-98
• /
• 2017

The purpose of this study is to provide basic information for the development of pants patterns with a high level of fit and comfort through calculating surface variations of lower body parts by movement, grouping them into factors, and analyzing how their surface variations link to one another. The achieved results will help determine essential elements for constructing pants patterns, such as key measurements of lower body parts, the amount of ease values and selection of fabrics, which should be taken into consideration for allowing better movement in clothing. The study required lower body 3D scanning of women for analysis, and 13 women between the ages of 20-24 participated in the scanning, which was done by using Artec Eva 3D scanner. Their scanned data were digitalized and converted to measure the values of their lower body surface length and girth in pre-determined positions such as walking, stair climbing and sitting on a chair. These measurements have been statistically analyzed through SPSS 21.0 to obtain the average amounts and rates of extension for each of the measurement item. Some of the highlighted study results are as follows: The surface length and girth measurements were grouped into 4 factors based on their average extension rates. The results from correlation analysis between measurement items within each factor demonstrated that common items linked to all the changes in the values of other items in the three movements. But in most cases, items were not always correlated with each other for different movements. The results also showed that there were correlations between girth measurements, length measurements, and girth and length measurements. Therefore, key measurements for daily pants should be determined within reasonable estimations between relevant measurement items, while the measurements for work pants, which often withstand certain postures or repetitive movements, may require measurement items that are appro priate for, and closely related to, certain movements or tasks.

• 한국의류학회지
• /
• 제27권1호
• /
• pp.18-28
• /
• 2003

The purpose of this study is to provide total data of real body-type and self-evaluation about it. The subjects were 614 middle-aged women between 35 and 59 years old. Data were collected through measurement and a questionnaire survey on self-evaluation. The results of self-evaluation of body are as follows; 1. As the result of the recognition degree analysis, people consider themselves thicker, shorter or smaller than what they really we, regardless of ages and types. In addition, the women of younger group rather than the women of older group consider themselves bigger/thicker and shorter than what they really are. They think that the items of waist girth, abdominal girth, hip girth, upper arm girth. and thigh girth are thicker than the other items, however, among girth items the size of bust girth is smaller than the other items. The women of the late middle-aged group consider their somatotype thicker/bigger and shorter than the women of the early middle-aged group do. 2. As the result of body cathexis for each part, women in general rum out themselves not to be satisfied with their body parts, regardless of ages and types. Particularly, they are not satisfied with abdominal girth, weight, hip girth. According to the age bracket, the women in the older group are more satisfied than the women of younger group in terms of their body. According to somatotype, women in tall and slim groups are more satisfied with their body. The women of the early middle-aged group turn out not to be satisfied with girth items while the women of the late middle-aged group are not satisfied with length items.

• 한국의류학회지
• /
• 제32권1호
• /
• pp.134-146
• /
• 2008

This study measured the body parts of female adults in their 20s, 40s and 60s living in Japan and analyzed and examined the measures by age group in order to provide the basic data required for the somatics study of Koreans living abroad. The subjects were 304 women in their 20s, 40s and 60s born in Japan and living in Osaka at present, and 81 items were measured. The major results of this study are described below. All women in their 20s, 40s and 60s showed significant differences in weight, waist size and abdominal size. The 19 height items of which group were different from the measurements of the women in their 60s. All 20 length items displayed a significant difference by age group. The significant differences by age group were also observed in eight items of 12 width items, 10 items of 13 thickness items and 13 items of 14 girth items except the ankle girth. The weight measurements had a significant difference by age group(${\le}0.05$). The women in their 20s, 40s and 60s revealed almost similar values in the shoulder angles. As a result of the analysis above, the items that were considered being included in the obesity items in all age groups displayed significant personal differences. The women in their 20s had the largest sizes in the length and height items. The older the age, the higher the measures of width and girth items were. Those results helped to estimate the change of figures by torso by age.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.128-141
• /
• 1996

The pourpose of this study is to determine the exact size which can be the basic elements of the fashion design with the measurement of middle-aged women's body, and to grasp the peculiar tomato type of the middle-aged women by compacting each measurement and examing the change of body shape. Making 215 house wives about 40 to 55 years old the subject of this research, we measured the body size from June to August, 1994. After analyzing the data through the 43 item.; of the body measurement, grasping the characteristics of the tomato type, we classified three types of physical standard and looked into the element of body structure. The results were as follows; 1. The average Rohrer index of middle-aged women in Tas-gu is about 1.5 and they usually seem to be fat compared with other groups. 2. Age has much influence on the body change of middle-aged women. Especially around 45 years old, the body change showed remarkable. 3. When analyzing the elements of the body measurement, the biggest elements of middle -aged women's body structure are in the items of width, thickness and girth related to the expansion of body line. Therefore in the middle age, the thickness and the girth have more influence on the human body than the height and the length, so the items of thickness and girth is the most important factor in the somato type. 4. In the slim body and standard body, the thirst factor is the items of height and length related to vertical size and the second is the items of width and thickness and girth. In ice fat body the first factor is the items of width, thickness, girth and the second is those of height, length. Unlike other body shapes, the fat body has many factors, which shows that the fat body has much variation in each part in proportion to fatness.

• 대한가정학회지
• /
• 제41권6호
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.