• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.3-9
• /
• 2010

Drainage density, defined as the degree to which a landscape is dissected by streams, is a fundamental property of natural terrain that reflect the comprehensive morphologic response of watershed. In this study the spatial variability of drainage density is analyzed by statistical approach to it and its plotting method is proposed. Overland flow length is confirmed to be a highly variable spatial factor from the result of statistical analysis. Distribution map of drainage density based on spatial autocorrelation length in this study would be a superior tool to the classical definition of drainage density.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.105-114
• /
• 1993

The ciculation due to bottom density current produced by a dense inflow into a small reservoir is analysed by numerical scheme. Before the front of the density current arrives at the downstream end, the mixing in the reservoir is mainly caused by the anticlockwise vortex formed at the downstream of plunging point along the movement of bottom density current. Upon the arrival of the front of the density current at the downstream end an internal surge is created through an internal hydraulic jump. With repeated propagation of the internal surge back and forth the mixing in the reservoir is progressed and the thickness of dense layer is increased upward. The dilution of the overflow at downstream end is found to depend on inflow densimetric Froude number, reservoir length and elapsed time. The time required for the overflow to attain a specified dilution increases as reservoir length increases and Fre decreases.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.51-62
• /
• 2001

Jurassic granites of three sites, Pocheon, Geochang and Habcheon, were analysed with respect to the characteristics of the rock cleavage. Microscopic analysis for the oriented thin sections of the specimens was conducted by using the scanline survey technique to measure microcrack direction, spacing and length. The results showed that the preferred orientations of microcrack developed in quartz and feldspar arc coincident with the orientation of quarry planes. The length of microcrack is related to grain size. The length of microcrack in coarse-grained granite is longer than that in relatively fine-grained granite. In all granites, microcracks related to the preferred orientations are well developed in order of rift, grain and hardway planes in number, length and density.

• 한국해양학회지
• /
• v.15 no.2
• /
• pp.108-111
• /
• 1980

The sampling was made by a kind of trap nets and an electric fishing apparatus in the lagoons of Arcachon Bay. Length frequency distributions obtained by two gears are combined to propose more reliable length composition of the population. The biomass was estimated by the capture and recapture method in a limited area with electric fishing apparatus, and it was redressed based on the corrected length composition. It showed approximately 638kg/ha in the deeper parts of the lagoons. It suggests that the lagoons of Arcachon Bay contain relatively high density of eels.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.348-348
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.520-528
• /
• 2000

he speed of microprocessor getting faster, the data transfer width between the microprocessor and the memory becomes a critical part to limit the system performance. So the study of the computer architecture with the high code density is cmerged. In this paper, a tentative Bi-Length Instruction Set Computer(BISC) that consists of 16 bit and 32 bit length instructions is proposed as the high code density 32 bit microprocessor architecture. The 32 bit BISC has 16 general purpose registers and two kinds of instructions due to the length of offset and the size of immediate operand. The proposed 32 bit BISC is implemented by FPGA, and all of its functions are tested and verified at 1.8432MHz. And the cross assembler, the cross C/C++ compiler and the instruction simulator of the 32 bit BISC are designed and verified. This paper also proves that the code density of 32 bit BISC is much higher than the one of traditional architecture, it accounts for 130~220% of RISC and 130~140% of CISC. As a consequence, the BISC is suitable for the next generation computer architecture because it needs less data transfer width. And its small memory requirement offers that it could be useful for the embedded microprocessor.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.49-54
• /
• 2005

The effective charge number and the critical current density of electromigration in eutetic SnPb and Pb Free $(SnAg_{3.8}Cu_{0.7)$ flip chip solder bumps are studied. The effective charge number of electromigration in eutectic SnPb solder is obtained as 34 and the critical current density is $j=0.169{\times}({\delta}_{\sigma}/{\delta}_x})\;A/cm^2,\;where\;({\delta}_{\sigma}/{\delta}_x})$ is the electromigration-induced compressive stress gradient along the length of the line. While the effect of electromigration in Pb free solder is much smaller than that in eutectic SnPb, the product of diffusivity and effective charge number $DZ^{\ast}$ has been assumed as $6.62{\times}10^{-11}$. The critical length for electromigration are also discussed.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.429-433
• /
• 2012

In this paper, we consider nonbinary quasi-cyclic low-density parity-check (QC-LDPC) codes and propose a method to design multiple rate codes with either fixed information bit length or block bit length, tailored to different scenarios in wireless applications. We show that the proposed codes achieve good performance over a broad range of code rates.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.139-147
• /
• 2017

Acoustic performance of splitter silencers was investigated by using 3-dimensional commercial software and experiments. Flow resistivity of sound absorbing material was indirectly estimated by using an impedance tube setup and a curve fitting method. In addition the acoustic impedance of perforated plate was determined by an empirical formulation. Such properties have been used as input parameters in the commercial software. The prediction for a splitter silencer with 1000 mm length was compared with the experimental result. The numerical method is then applied to identify the effects of number of splitters, length of splitters, absorptive material density, and porosity of a perforated plate on the performance of the splitter silencers. As the number and length of splitter increases, the acoustic performance significantly increases. Although the increase of density of absorptive material also increase the acoustic performance, a change in the density over a certain level hardly affect it. The increase of porosity will enhance the performance especially at higher frequencies.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 1999

For roughened annular pipes with diameter ratios of 0.26, 0.39, and 0.56 and with Reynolds numbers ranging 13,000 to 67,000, friction factor, autocorrelation coefficients, power spectral density functions, and integral length scales for each flow condition using X-type hot wire anemometry system are experimentally investigated. Distributions of these quantities show that the times which the streamwise autocorrelation coefficients become zero first increase with decreasing the radius ratios of concentric annuli and Reynolds numbers, however the power spectra density functions increase with increasing the radius ratios and Reynolds number.