• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.205-214
• /
• 2008

To evaluate the aquaculture potential of a subtrophic noble scallop, Chlamys nobilis in Korean waters, nursery growth of the species was studied on two remote Jeju coasts, Jigwido and Ongpori. The early growth performance of the first 60 days after settlement was expressed as: $SL=0.1664e^{0.0579x}$ ($r^2=0.924$), where x stands for days after settlement and SL for shell length. The early spats sized 1 mm in average shell length became $4.1{\pm}0.8\;mm$ after a month of nursery culture, thereafter grew to $13.0{\pm}1.9$, $23.1{\pm}3.1$, $30.3{\pm}4.3$, and $33.6{\pm}5.2\;mm$ for consecutive 4 months in Jigwido coastal area. Mean growth gains (mean daily gains in parenthesis) were $76.7{\pm}7.7$ ($165.6{\mu}m$), $73.3{\pm}7.3$ ($154.0{\mu}m$), $69.4{\pm}8.4$ ($140.0{\mu}m$), and $68.7{\pm}8.5\;mm$ ($137.4{\mu}m$), in depths of 5, 10, 15, and 20 m, respectively. The growth rate was significantly decreased as cultured in deeper place (p < 0.05). As culturing density was higher, growth performance of the scallop was decreased in both locations. Overall, in our preliminary study, the growth performance of scallop in Korean waters was not better than that in Japan, but it seems to be worth doing further study for successful introduction to Korean waters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.18-24
• /
• 2002

n this paper, we have fabricated pseudomorphic high electron mobility transistors (PHEMT) with a 0.2 ${\mu}{\textrm}{m}$ wide-head T-shaped gate using electron beam lithography by a dose split method. To make the T-shape gate with gate length of 0.2 ${\mu}{\textrm}{m}$ and gate head size of 1.3 ${\mu}{\textrm}{m}$ we have used triple layer resist structure of PMMA/P(MMA-MAA)/PMMA. The DC characteristics of PHEMT, which has 0.2 ${\mu}{\textrm}{m}$ of gate length, 80 ${\mu}{\textrm}{m}$ of unit gate width and 4 gate fingers, are drain current density of 323 ㎃/mm and maximum transconductance 232 mS/mm at $V_{gs}$ = -1.2V and $V_{ds}$ = 3V. The RF characteristics of the same device are 2.91㏈ of S21 gain and 11.42㏈ of MAG at 40GHz. The current gain cut-off frequency is 63GHz and maximum oscillation frequency is 150GHz, respectively.ively.

• The Journal of Engineering Research
• /
• v.1 no.1
• /
• pp.5-14
• /
• 1997

The purpose of thesis is to analyze the radiation characteristics of an offset gregorian antenna in order to design the satellite-loaded antenna. In order to compute the radiation pattern of the sub-reflector, the reflected wave is obtained by GO(Geometric Optics) at an arbitrary shaped sub-reflector. Then the total radiation EM wave is obtained by summing the diffracted fields obtained by UTD(Uniform Geometrical Theory of Diffraction) and the GO fields. In order to calculate the far field radiation pattern of the main reflector, the radiation integral equation is derived from the induced current density on reflector surface using PO(Physical Optics). The kernel is expanded in terms of Jacobi-Bessel series for increasing the computational efficiency, then the modified radiation integral is represented as the double integral equation independent of observation points. When the incident fields are assumed to be x-or y-polarized field, the characteristics of radiation patterns in the gregorian antenna is analyzed in case of the main reflector having the focal length of 62.4$\lambda$, diameter of 100$\lambda$, and offset height of 75$\lambda$, and the sub-reflector having the eccentricity of 0.501, the inter focal length og 32.8$\lambda$, the horn axis angle of $9^{\circ}$ and the half aperture angle of $15.89^{\circ}$. The cross-polarized level and side lobe level in the offset geogorian reflector are reduced by 30dB and 10dB, respectively, in comparison with those of the offset parabolic antenna.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.97-102
• /
• 2007

[ $CO_2$ ] laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400um laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can . Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of Pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can . Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.162-173
• /
• 1996

Dry magnetic particle inspection(MPI) was performed to detect the surface defects of steel ingot cast billets. Magnetic properties of several materials were characterized by the measurement of the B-H hysteresis curve. The inspection results were evaluated in terms of the magnetizing current, temperature, and the amount of magnetic particles applied to billets. Magnetic flux leakage near the defect site of interest was measured and compared with the results of calculation by the finite element method in the case of direct magnetizing current. Direct and alternating magnetizing currents for materials were deduced by the comparison of the inspections. Results of the magnetic particle inspection by direct magnetizing current were compared with those of finite element method calculations, which were verified by measuring magnetic leakage flux above the surface and the surface defects of the material. For square rods, due to the geometrical effect, the magnetic flux density at the edges along the length of the rods was about 30% of that at the center of rod face for a sufficiently large direct magnetizing current, while it was about 70% for an alternating magnetizing current. Thus, an alternating magnetizing current generates rather uniform magnetic flux density over the rods, except for the region on the face across about 10 mm from the edge. The attraction of the magnetic particle by the magnetic leakage field was nearly independent of the surface temperature of the billets up to $150^{\circ}C$. However, the temperature should have been limited below $60^{\circ}C$ for an effective fixing of gathered magnetic particles to the billet surface using methylene chloride. We also found that the amount of applied magnetic particles tremendously affected the detection capability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.51-62
• /
• 2016

Parametric studies for various site conditions by using 3d numerical model were carried out in order to estimate dynamic behavior of soil-pile-structure system in dry soil deposits. Proposed model was analyzed in time domain using FLAC3D which is commercial finite difference code to properly simulate nonlinear response of soil under strong earthquake. Mohr-Coulomb criterion was adopted as soil constitutive model. Soil nonlinearity was considered by adopting the hysteretic damping model, and an interface model which can simulate separation and slip between soil and pile was adopted. Simplified continuum modeling was used as boundary condition to reduce analysis time. Also, initial shear modulus and yield depth were appropriately determined for accurate simulation of system's nonlinear behavior. Parametric study was performed by varying weight of superstructure, pile length, pile head fixity, soil relative density with proposed numerical model. From the results of parametric study, it is identified that inertial force induced by superstructure is dominant on dynamic behavior of soil-pile-structure system and effect of kinematic force induced by soil movement was relatively small. Difference in dynamic behavior according to the pile length and pile head fixity was also numerically investigated.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.102-109
• /
• 1994

Profitability was analysed in the fields of various planting densities from 1,666 trees/10a to 4,166 with mulberry grafts or conventional saplings under the consideration of leaf yield and quality. Leaf yield per tree decreased with the higher planting densities. Seasonal and total leaf yield per area, however, increased by 20 to 63% as a mean for 3 years in the densities of 2,083~4,166 trees per 10a than in the conventional density of 1,666 trees per 10a. The increase in leaf yield per area was not so high in the densities over 2,083. Leaf yield in the sapling plots was a little higher than that in the graft plots. Topping of shoot tip affected neither on the branch length nor on yield. Yield was higher in the planting spacing with single raws than in that with double raws. Quality of leaves in the densities from 2,083 to 3,333 trees per 10a was relatively good judged based on the results of the pupation rate and cocoon yield and quality.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.565-572
• /
• 1998

Survival rate of larval red spotted grouper, Epinephelus akaara is very low, because mouth size of the larvae is too small to eat normal sizes of rotifers. In order to enhance larval survival, optimal culture conditions for larvae using different live foods and water temperatures were studied. Bigger live food produced larger size of rotifer, when the rotifer was cultured with three different live foods such as Tetraselmis tetrathele, marine Chlorella and Nannochloris oculata. Also, the size of rotifer produced was temperature-dependent showing that higher water temperature induced smaller rotifer. Survial rate of the larvae increased with the increase of water temperature up to $29{\circ}C$. Also, higher larval survials were found at the food density of 15 to 20 individuals per milliliter. The larvae fed L-type or small individuals of L-type rotifer died all within a week, although the larvae fed S-type or small individuals of S-type one survived successfully during this period. The size of small individuals of S-type rotifer collected through fine net became larger in a few hours within larval culture tank. Survival rate of grouper larvae with initial stocking density of 40 thousands in 6-ton concrete tank was 6.3% in 10 days and 0.2% in 53 days after hatching, respectively. Total length of the larvae reached around 29.5 mm in 53days after hatching.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.153-160
• /
• 2008

This experiment was conducted to find out an adequate shading level (0, 55, 74, and 95%) on the shoot growth of rooted cuttings of native Hydrangea serrata for. acuminata. New shoot height (NSH), length and width of leaf, and stem diameter under 55% shading were the greatest. Net photosynthetic rate under 55% shading was the greatest, while intercellular $CO_2$ concentration was the least in this treatment. The greatest content of photosynthetic pigments (total chlorophyll, carotenoid) was observed in leaves grown under a 74%, followed by a 55% shading level. Leaf stomata were observed on the abaxial surface, but those on adaxial surface in all shading treatments were not observed. In 95% shading, decreased stomatal density and development were observed. Higher stomatal density and development, however, were observed in 55% shading. Therefore, it is concluded that a 55% shading level was the optimum for growth of new shoots of rooted cuttings of native H. serrata for. acuminata.