• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.81-91
• /
• 2014

This paper proposes hidden-node aware grouping (HAG) algorithm to enhance the performance of institute of electrical and electronics engineers (IEEE) 802.15.4 networks when they undergo either severe collisions or frequent interferences by hidden nodes. According to the degree of measured collisions and interferences, HAG algorithm dynamically transforms IEEE 802.15.4 protocol between a contention algorithm and a contention-limited one. As a way to reduce the degree of contentions, it organizes nodes into some number of groups and assigns each group an exclusive per-group time slot during which only its member nodes compete to grab the channel. To eliminate harmful disruptions by hidden nodes, especially, it identifies hidden nodes by analyzing the received signal powers that each node reports and then places them into distinct groups. For load balancing, finally it flexibly adapts each per-group time according to the periodic average collision rate of each group. This paper also extends a conventional Markov chain model of IEEE 802.15.4 by including the deferment technique and a traffic source to more accurately evaluate the throughput of HAG algorithm under both saturated and unsaturated environments. This mathematical model and corresponding simulations predict with 6%discrepancy that HAG algorithm can improve the performance of the legacy IEEE 802.15.4 protocol, for example, even by 95% in a network that contains two hidden nodes, resulting in creation of three groups.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1673-1678
• /
• 2009

Multicast can transmit data packet to multiple terminals by using only one transmission and enhances the system performance. However, the multicast transmission rate is fixed and the system performance is not optimized. In this paper, we propose an adaptive multicast rate control method. In the proposed method, orthogonal subcarrier is assigned to each terminal. Each terminal informs the channel status using the allocated subcarrier. Transmitter selects the optimal rate using the feedback information. With the proposed adaptive rate control method, the system performance is enhanced compared with the legacy multicast method.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.225-232
• /
• 2008

When a single source of multimedia contents is distributed to multiple reproduction devices, the audio and video contents require synchronous play for multi-channel stereo sound and lip-synchronization. The multimedia system in vehicle, especially, has researched to move to wireless environments from legacy wired environments. This paper proposes the advanced algorithm for providing synchronized services of real-time multimedia traffic in IEEE 802.11 WLANs [1]. For these, we implement the advanced IEEE 1588 Precision Time Protocol [2] and the environments for simulation. Also, we estimate and analysis performance of the algorithm, then we experiment and analysis after the porting of algorithm in wireless LAN devices (Linksys wrt-350n AP network device) to characterize timing synchronization accuracy.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4357-4366
• /
• 2023

MARS-KS, a domestic regulatory confirmatory code of Republic of Korea, had been developed by integrating RELAP5/MOD2 and COBRA-TF. The integration of COBRA-TF allowed to extend the capability of MARS-KS, limited to one-dimensional analysis, to multi-dimensional analysis. The use of COBRA-TF was mainly focused on subchannel analyses for simulating multi-dimensional behavior within the reactor core. However, this feature has been remained as a legacy without ongoing maintenance. Meanwhile, MARS-KS also includes its own multidimensional component, namely MULTID, which is also feasible to simulate three-dimensional convection and diffusion. The MULTID is capable of modeling the turbulent diffusion using simple mixing length model. The implementation of the turbulent mixing is of importance for analyzing the reactor core where a disturbing cross-sectional structure of rod bundle makes the flow perturbation and corresponding mixing stronger. In addition, the presence of this turbulent behavior allows the secondary transports with net mass exchange between subchannels. However, a series of assessments performed in previous studies revealed that the turbulence model of the MULTID could not simulate the aforementioned effective mixing occurred in the subchannel-scale problems. This is obvious consequence since the physical models of the MULTID neglect the effect of mass transport and thereby, it cannot model the void drift effect and resulting phasic distribution within a bundle. Thus, in this study, the turbulence mixing model of the MULTID has been improved by means of the inter-channel mixing model, widely utilized in subchannel analysis, in order to extend the application of the MULTID to small-scale problems. A series of assessments has been performed against rod bundle experiments, namely GE 3X3 and PSBT, to evaluate the performance of the introduced mixing model. The assessment results revealed that the application of the inter-channel mixing model allowed to enhance the prediction of the MULTID in subchannel scale problems. In addition, it was indicated that the code could not predict appropriate phasic distribution in the rod bundle without the model. Considering that the proper prediction of the phasic distribution is important when considering pin-based and/or assembly-based expressions of the reactor core, the results of this study clearly indicate that the inter-channel mixing model is required for analyzing the rod bundle, appropriately.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.687-698
• /
• 2014

ATSC is currently working on standardization of hybrid 3DTV broadcasting service in heterogenous network environment after completion of service-compatible 3DTV broadcasting service standard based on broadcasting channel. This paper proposes a convergence 3D video broadcasting method on broadcasting and IP network while guaranteeing a Full-HD 3D quality without degrading the image quality of legacy DTV. Specifically, this paper describes transmission of the 3D additional video using the ISO/IEC 23009-1 DASH, robust synchronization method under heterogenous network environments and system target decoder model for hybrid 3DTV receiver. Based on experimental results, we confirm that proposed technologies can be used as a core technology in the hybrid 3DTV standardization and a reference model for a development of hybrid 3DTV encoder and receiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.37-47
• /
• 2009

In this paper fast mobile multicast handover mechanism based on IEEE 802.21 MIH (Media Independent Handover) is proposed. We solve long multicast handover delay time caused by L3 movement detection mechanism of the existing mobile multicast methods. The proposed architecture adopts multicast manager concept to MIH framework in order to efficiently perform mobile multicast handover, and adds the new MIH messages dedicated for mobile multicast. Since multicast channel zapping operations of mobile users effectively make a mobile terminal handover, the architecture should consider the situations. Multicast network selection algorithm is designed by means of terminal speed and fair selection algorithm named AHP/GRA. Finally the performance of the proposed architecture against the legacy mobile multicast mechanisms is evaluated in terms of signaling cost and multicast handover delay time.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.187-193
• /
• 2004

Wireless networks play a very important role in communications today. For example, wireless networks today provide from the basic services like e-mail and FTP to the multimedia applications like Web service. It is obvious that QoS requirements to these diverse applications over wireless networks will continue as in wired networks. Much research has been done to develop QoS supporting algorithms on Internet. But due to the limited bandwidth and varying channel states of the wireless networks, it is difficult to support differentiated service over wireless networks. In this paper we propose the modified wireless token ring protocol supporting QoS to the real-time traffic service node over Internet environments in which non-real-time and real-time traffic service nodes coexist. In the proposed algorithm, the real-time traffic service node gets the priority to take token over the non-real-time traffic service node. So the proposed algorithm support quick transmission of the real-time traffic service node. And this advantage can be obtained with minor modification of the legacy wireless token ing protocol to support QoS. We also consider the lost token recovery mechanism.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.123-129
• /
• 2018

Recently, as required wireless communication traffic increase, millimeter wave mobile technologies that can secure broadband spectrum are gaining attention. However, the path loss is high in the millimeter wave channel. Massive MIMO system is being researched in which can complement the path loss by beamforming by equiped large-scale antenna at the base station. While legacy beamforming techniques have analog and digital methods, practical difficulties exist for application to massive MIMO systems in terms of system complexity and cost. Therefore, this paper studies a hybrid beamforming scheme for massive MIMO system in the millimeter wave band. Also this paper considers spatial multiplexing scheme to serve multi-users with multiple received antennas. Gains of the beamforming and the spatial multiplexing schemes are evaluated by analyzing the spectral efficiency.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.254-261
• /
• 2007

In this paper, we propose a blind equalization method for advanced terrestrial digital multimedia broadcasting (AT-DMB) systems which use hierarchical modulation. The AT-DMB system adopts hierarchical 16-ary quadrature amplitude modulation (16-QAM) to ensure backward-compatibly with the differential quadrature phase shift keying (DQPSK) signal of the legacy terrestrial digital multimedia broadcasting (T-DMB) systems and to support higher transmission rate. Due to the hierarchical modulation, the conventional T-DMB signal and the additional signal have different error rate at same signal to noise ratio (SNR). By weighting the decided symbols differently according to the reliability of the symbols, i.e., high priority symbol with low error rate and low priority symbol with high error rate, we can improve the channel estimation accuracy. In this paper, we analyze SNR loss by hierarchical modulation and confirm it through simulations. Moreover, through simulations, we verify that the proposed weighting method improve BER compared to the no-weighting method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.39-47
• /
• 2009

This paper presents implementation of two types of the 802.11 MAC engine for the next generation WLAN, 802.11n. The first version of MAC engine consists of hardwired logic and embedded firmware. Hardwired logic includes Tx block, Rx block, Backoff block, and ChannelManage block. Embedded firmware contains Protocol Control block, MLME block, and MSDU processing block. The first version has a time-critical fault during the atomic transmission caused by software overhead, so it can not be applied to 802.11n MAC. For that reason, the second version has additional blocks with hardwired logic modules to reduce software overhead of the first version. This enhanced version has 73Mbps throughput and it is expected to be further improved up to 129 Mbps with frame aggregation which is one of the key additional features of 802.11n. As a result, the second version of MAC engine can be applied to 802.11n MAC.