• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.593-600
• /
• 2014

OFDMA systems solves frequency selective fading problem and provides improved performance by optimal allocation of subcarriers and transmit power. Two-way relay systems provide improved spectral efficiency compared to that of the conventional half-duplex relay using bidirectional communications. In legacy OFDMA system such as WiBro, two-way DF relay utilization causes pilot re-assignment and impossibility of channel estimation and decoding at relay nodes by self-interference. In this paper, resource allocation schemes for legacy OFDMA systems with two-way DF relay are proposed. The proposed schemes allocate subcarriers considering destinations nodes which are connected to relay nodes as individual nodes which are directly connected to a base station. Subsequently, the proposed schemes compensate bandwidth loss due to orthogonal allocations by overlapped allocating unused subcarriers at other noes. Numerical simulations show that the proposed resource allocation schemes provide improved performance compared with orthogonal allocation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.73-81
• /
• 2009

Wireless media communication has lower robustness and stability than wired communication because of narrow bandwidth and unstable channel state. To make up for the deficient points of wireless communication, we used the diversity effect of cooperation communication and the error correction effect of channel coding schemes. In this paper, the cooperative communication system with RCPC codes and Hybrid ARQ transmission scheme is proposed for improving reliability on wireless communication, and we executed these simulations. From the simulation results, proposed system is showed lower BER performance than legacy system. In addition, we confirm the fact that the channel state of Relay-node and source-node is more important than the channel state of Relay-node and destination-node.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.501-508
• /
• 2011

In this paper, we propose a channel allocation algorithm of MSAP(Mobile Subscriber Access Point) and data delivery scheme exploiting the symbol level network coding. The network is comprised of TS(Tactical Switch) as a backbone node, MSAPs, and TMFTs(Tactical Multi-Function Terminal). The TS performs the channel allocation considering the communication range overlapping between the neighboring MSAPs and applies the symbol level network coding, if necessary, depending on the position of the TMFTs. Assuming the number of available antennas of TMFT and MSAP will be extended to two from one, we propose two schemes: single mode and dual mode. Through the simulation, we show that the proposed delivery scheme provides higher delivery ratio and lower delivery delay compared with the legacy store-and-forward scheme.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.87-88
• /
• 2006

In this paper, we propose a new selective scanning scheme based on hand-off path information, which can provide an efficient reducing of delay time. This scheme eliminates almost of the scanning delay time by using Selective Scan based on Experience Path Table(SSEPT) algorithm and also completed hand-off within few milliseconds by using the next candidate channel indexing mechanism. Our scheme reduces the total number of scanning channels as well as the delay time on each channel. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the scanning channels and the total delay time.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.221-226
• /
• 2006

Around 2002, the United States Coast Guard (USCG) identified a need to re-capitalize their Reference Station (RS) and Integrity Monitor (IM) equipment used in the Nationwide Differential Global Position System (NDGPS). Commercially available off-the-shelf differential RS and IM equipment lacked the open architecture required to support long-term goals that include future system improvements such as use of new civil frequencies on L2 and L5 and realization of a higher rate NDGPS beacon data channel intended to support RTK. The first step in preparing for this future NDGPS was to port current RTCM SC-104 compatible RS and IM functionality onto an open architecture PC-based platform. Trimble's product Charisma is a PC-based RS and IM software designed to meet these USCG goals. In fact USCG engineers provided key designs and design insights throughout the development. We cannot overstate the contribution of the USCG engineers. Fundamental requirements for this effort were that it be sufficiently flexible in hardware and software design to support fluid growth and exploitation of new signals and technologies as they become available, yet remain backward compatible with legacy user receivers and existing site hardware and system architecture. These fundamental goals placed an implicit adaptability requirement on the design of the replacement RS and IM. Additionally, project engineers were to remain focused on sustaining the high level of differential GPS service that 1.5 million legacy users have come to depend on. This paper will present new hardware and software (i.e., Trimble's Charisma software) architecture for the next generation NDGPS RS and IM. This innovative approach to engineering on an open architecture PC-based platform allows the system to continue to fulfill legacy NDGPS system requirements and allows the USCG and others to pursue a scalable hardware re-capitalization strategy. We will use the USCG's recapitalization project to explain the essential role of the Charisma software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.27-33
• /
• 2009

This paper proposes transmit power control techniques with fading channel prediction scheme based on recurrent neural network for high-speed mobile communication systems. The operation result of recurrent neural network which is derived interpretively solves complexity problems of neural network circuit, and channel gain of multiple transmit antenna is derived with maximum ratio combining(MRC) by using the operation result, and this channel gain control transmit power of each antenna. simulation results show that proposed method has a outstanding performance compared to method that is not to be controlled power based on channel prediction. Most of legacy studies are for robust receive technique of fading signals or channel prediction of fading signals limited low-speed mobility, but in open loop Power control, proposed channel prediction method decrease system complexity with removal of fading effect in transmitter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.338-344
• /
• 2017

In this paper, two-way amplify-and-forward relay methods are investigated where two terminals and one relay node are equipped with multiple antennas. In two-way relay channels, it is assumed that one terminal can eliminate its own self-interference but the other cannot. For this channel, we first maximize the sum-rate performance by employing an iterative gradient descent (GD) algorithm. Then, a simple singular value decomposition (SVD) based block triangularization is developed to null the self-interference. Simulation results show the proposed methods outperform the conventional schemes for various environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.99-107
• /
• 2010

In a single frequency network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interferences induced by the multiple transmitters and/or repeaters using the same frequency are inevitable. Since the presence of interferences results in performance degradation of the SFN, it is crucial to manipulate the interferences by adjusting the transmit power and timing of each transmitter and repeater. In the ATSC terrestrial DTV system, in order to facilitate the interference manipulation process, a transmitter identification (TxID) signal which is uniquely embedded in the signal to be transmitted from each transmitter and repeater is recommended. Even though the injection level of the TxID signal is much lower than the DTV signal, the TxID signal injection infects the DTV signal. Hence, the effect of the TxID signal on the DTV signal must be investigated before deployment. In this paper, the effect of the TxID signal on the performance of legacy DTV receivers under additive white Gaussian noise and multipath channel environments is investigated not only with computer simulation but also with laboratory and field tests. The test results show that the average threshold of visibility degradation of the legacy DTV receivers due to the TxID signal injection is less than 0.2 dB at the TxID injection level of -30 dB.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.913-925
• /
• 2016

In-band wireless full-duplex is a promising technology that enables a wireless node to transmit and receive at the same time on the same frequency band. Due to the complexity of self-interference cancellation techniques, only base stations (BSs) are expected to be full-duplex capable while user terminals remain as legacy half-duplex nodes in the near future. In this case, two different nodes share a single subchannel, one for uplink and the other for downlink, which causes inter-node interference between them. In this paper, we investigate the joint problem of subchannel assignment and power allocation in a single-cell full-duplex orthogonal frequency division multiple access (OFDMA) network considering the inter-node interference. Specifically, we consider two different scenarios: i) The BS knows full channel state information (CSI), and ii) the BS obtains limited CSI through channel feedbacks from nodes. In the full CSI scenario, we design sequential resource allocation algorithms which assign subchannels first to uplink nodes and then to downlink nodes or vice versa. In the limited CSI scenario, we identify the overhead for channel measurement and feedback in full-duplex networks. Then we propose a novel resource allocation scheme where downlink nodes estimate inter-node interference with low complexity. Through simulation, we evaluate our approaches for full and limited CSIs under various scenarios and identify full-duplex gains in various practical scenarios.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.141-146
• /
• 2006

In these days, wireless data services are becoming ubiquitous in our daily life because they offers several fundamental benefits including user mobility, rapid installation, flexibility, and scalability. Moreover, the requests for various multimedia services and the Quality of Service (QoS) support have been one of key issues in wireless data communications. Therefore the research relative to Medium Access Control (MAC) has been progressing rapidly. Especially a number of QoS-aware MAC schemes have been introduced to extend the legacy IEEE 802.11 MAC protocol which has not guaranteed any service differentiation. However, none of those schemes fulfill both QoS features and channel efficiency although these support the service differentiation based on priority. Therefore this paper studies a novel MAC scheme, referred to as Enhanced Distributed Coordination Function with Network Adaptation (EDCF-NA), for enhancements of both QoS and medium efficiency. It uses a smart factor denoted by ACK rate and Network Load Threshold (TH). In this paper, we study how the value of TH has effect on MAC performance and how the use of optimal TH pair improves the overall MAC performance in terms of the QoS, channel utilization, collision rate, and fairness. In addition, we evaluate and compare both the performance of EDCF-NA depending on several pairs of TH and the achievement of various MAC protocols through simulations by using Network Simulator-2 (NS-2).