• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.61-69
• /
• 2008

The purpose of this study is to examine the success or failure on the balance beam in element group requirements posture which is bending salto side-ward tucked through kinetic analysis. The national team players were participated. The goal was to present training methods to coaches and athletes so as to provide scientifically useful information. The results from this study were summarized as below. When the performance was successful, the features of the body's center of gravity during the side somersault motion showed to spread from the center of the balance beam and the center of the gravity moved to the direction of the body's rotation. In the spring sections - event2 and 3, when the performance was successful, up/down fluctuation became more wider and increased air time. It supported the result that the projecting variable was higher than in failure trial. In addition, the right side hip joint angles and speed, and angular velocity as jumping up for a leap were larger than in failure trial. Those variables showed the optimal conditions for a leap. By increasing the speed of the upper limb from the shoulder and the speed of the shoulder joint angular velocity, the momentum was increased. Especially the right side shoulder joint angular velocity increased dramatically because the right leg was held. As to the side somersault motion, the angular momentum of successful trial with respect to x-axis was bigger than failed trial. It indicated that the increasing angular momentum with respect to x-axis was an important factor in flying motion. Besides, as to side somersault, the appropriate proportion of angular momentum with respect to y-axis and z-axis was a key to successful trails.

• Journal of Veterinary Clinics
• /
• v.28 no.5
• /
• pp.467-472
• /
• 2011

This study was conducted to describe clinical presentation of pelvic fracture and compare clinical outcomes of each part of pelvic fractures in 54 client-owned dogs. There was an average of 3.61 pelvic fractures per dog and 47 dogs had more than two fractures. The average time until initial weight-bearing on the affected leg, hospitalization after surgery, and lameness score at final check in 31 dogs that underwent surgery were 7.04 days, 16.39 days, and 1.25, respectively, and there were no significant difference in the incidence of sacroiliac luxation, iliac fracture, and acetabular fracture among them. The length of hospitalization and the lameness score upon final check of the dogs with over two surgically repaired sites were significantly longer and higher than those of the dogs with one surgically repaired site (P = .043 and P = .008, respectively). Upon final check of the dogs with bilateral pelvic fracture that was surgically treated, the hospitalization and lameness score were significantly longer and higher than those of dogs with unilateral pelvic fracture that was surgically treated (P = .034 and P = .033), respectively. The number of pelvic fractures treated surgically appears to be a more influential factor influencing recovery from pelvic fractures than the location of the pelvic fractures.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.4
• /
• pp.861-878
• /
• 2003

In the ancient time wind is considered as the life . soul and the human's breath which represents essence of universal creation and the absolute power and also the messenger of the god or god's state. Greek's 'pneuma' , India's 'Brahman' and the Old Testament's 'ruach' are used to signify the wind. Also Wind(風) in traditional culture, it is related to 玄妙之道 of 花郞, the flower of youth in Shilla dynasty and sexual intercourse in shaman's dream which can be thought as Freud's libido. In this aspect we can see the connection between the wind and the libido which can be meaning of sexual desire. Ancient Chinese wrote word ‘風’ as phoenix, the god's bird, the phoenix in inscriptions on bones and tortoise carapace(甲骨文) because one can feel the wind but can’t see it. The word Ki(氣) origins from 風 therefore 風 is 氣's fundamental notion. The wind can be understood by ki which travels around the world to create all nature. And the Wind is associated with 風化, 玄鳥, 八僧舞, which are related with reproduction. In the book of change (周易) the 震巽卦 ; 雷風 come under wind which means the function of ki and also menas the 精(essence of life) of 恒久(eternity) means the reprodution ; that performs succession of life. In the Oriental Medicine 氣 is a phenomenon that appears by movement of Ki by 相火(Ministerial fire). 相火 is core of the succession of life which means preservation of descendants; therefore 風 has very similar concept with sexual desire. 風 is the beginning ki of universe and in human body aspect 風 belong to the Liver Meridian. If 風 makes movement then the Pericardium Meridian of Hand Kwolum responds and the genital organs which belongs to Liver Meridian of Leg Kwolum reproductive function by contraction and expansion. Generally 風 understood as movement and origination and this is recognized as meaning of 氣. Therefore as studied above the present writer believe m. participates closely to reproductive function.

• Nuclear Engineering and Technology
• /
• v.18 no.2
• /
• pp.97-106
• /
• 1986

System thermal-hydraulic parameters and simulated, using the best-estimate system code(RELAPS/MODl/NSC), based upon the sequence of events for the KNU1 (Korea Nuclear Unit 1) loss of offsite power transient at 77.5% power which occurred on June 9,1981. The results are compared with the actual plant transient data and show good agreements. After the flow coastdown following the trips of both reactor coolant pumps, the establishment of natural circulation by the temperature difference between the hot and the cold legs is confirmed. The calculated reactor coolant flowrate closely approximates the plant data indicating the validity of relevant thermal-hydraulic models in the RELAP5/MOD1/NSC. Results also show that the sufficient heat removal capability is secured by the appropriate supply of the auxiliary feedwater without the operation of S/G PORVs. In addition, a scenario accident at full power, based upon the same sequence of events described above, is also analysed and the results confirmed that the safety of KNU1 is secured by the appropriate operation of the S/G PORVs coupled with the supply of auxiliary feedwater which ensures sufficient heat removal capability. The characteristics of the non-safety related components such as the turbine stop valve closing time, S/G PORV settings etc. are recognized to be important in the transient analyses on a bestestimate basis.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.417-428
• /
• 2021

The combustion characteristics of anthracite, which follow a complex process with low reactivity, must be considered through the dynamic behavior of circulating fluidized bed (CFB) boilers. In this study, computational fluid dynamics (CFD) simulation was performed to analyze the combustion characteristics of anthracite in a pilot scale 0.1 MW_th Oxy-fuel circulating fluidized bed (Oxy-CFB) boiler. The 0.1MW_th Oxy-CFB boiler is composed of combustor (0.15 m l.D., 10 m High), cyclone, return leg, and so on. To perform CFD analysis, a 3D simulation model reactor was designed and used. The anthracite used in the experiment has an average particle size of 1,070 ㎛ and a density of 2,326 kg/m³. The flow pattern of gas-solids inside the reactor according to the change of combustion environment from air combustion to oxygen combustion was investigated. At this time, it was found that the temperature distribution in air combustion and oxygen combustion showed a similar pattern, but the pressure distribution was lower in oxygen combustion. addition, since it has a higher CO₂ concentration in oxygen combustion than in air combustion, it can be expected that carbon dioxide capture will take place actively. As a result, it was confirmed that this study can contribute to the optimized design and operation of a circulating fluidized bed reactor using anthracite.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.2
• /
• pp.30-39
• /
• 2021

Background: The purpose of this study was to compare the differences in gait and mobility according to the types of assistive device for ankle joint including ankle foot orthosis (AFO), non-elastic tape, elastic tape, and high ankle shoes in chronic hemiplegic stroke survivors. Design: A cross-over design. Methods: Twelve hemiplegic stroke survivors participated in this study, and they walked under 5 different conditions including bare feet, wearing a AFO, wearing a non-elastic tape, wearing a elastic tape, and wearing a high ankle shoes. During the participants walked, the spatio-temporal gait analysis and mobility examinations were performed. For the spatio-temporal gait analysis (gait velocity and cadence, step length, stride length, and single and double leg support time) and mobility examinations, the gait mat, TUG and TUDS were used. Results: As s results, on the AFO, non-elastic tape, elastic tape, and high ankle shoes, there were significantly differences in the all spatio-temporal gait parameters, TUG, and TUDS compared to barefoot (p<0.05). In particular, all spatio-temporal gait parameters, TUG, TUDS were significantly improved with AFO compared to barefoot. TUG was significantly improved with AFO compared to non-elastic tape, TUG and TUDS were significantly improved with AFO compared to elastic tape, gait velocity was significantly improved with non-elastic tape compared to high ankle shoes, gait velocity and TUG were significantly improved with elastic tape compared to high ankle shoes, and TUDS was significantly improved with non-elastic tape compared to elastic tape. Conclusion: The AFO, non-elastic tape, elastic tape, and high ankle shoes showed a positive effect on gait and mobility compared to barefoot, and among them, wearing AFO was most effective for improving gait and mobility of chronic hemiplegic stroke survivors.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.43-50
• /
• 2021

In this paper, we design and implement KITNESS, a windows application that feeds back the accuracy of fitness motions based on Kinect sensors. The feature of this application is to use Kinect's camera and joint recognition sensor to give feedback to the user to exercise in the correct fitness position. At this time, the distance between the user and the Kinect is measured using Kinect's IR Emitter and IR Depth Sensor, and the joint, which is the user's joint position, and the Skeleton data of each joint are measured. Using this data, a certain distance is calculated for each joint position and posture of the user, and the accuracy of the posture is determined. And it is implemented so that users can check their posture through Kinect's RGB camera. That is, if the user's posture is correct, the skeleton information is displayed as a green line, and if it is not correct, the inaccurate part is displayed as a red line to inform intuitively. Through this application, the user receives feedback on the accuracy of the exercise position, so he can exercise himself in the correct position. This application classifies the exercise area into three areas: neck, waist, and leg, and increases the recognition rate of Kinect by excluding positions that Kinect does not recognize due to overlapping joints in the position of each exercise area. And at the end of the application, the last exercise is shown as an image for 5 seconds to inspire a sense of accomplishment and to continuously exercise.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.115-121
• /
• 2021

Human's landing strategies have been explained through lower extremity kinetics in various conditions. However, how lower extremity kinetics respond when the two conditions between a load and landing height are combined is not yet understood. To achieve the purpose of this study, a total of 20 men and women were subjected to drop landing according to a load(No load, 10%, 20%, 30% of the body weight) at various landing heights(0.3 m, 0.4 m, 0.5 m). As a result of the study, the main effect of a load was not statistically significant in all variables. But increasing of the landing heights showed more flexion angle which was statistically significant in knee joint. In addition, as the landing height increased, the medial-lateral, anterior-posterior, vertical force, and loading rate increased, while time to peak vertical force decreased which was statistically significant. Thus, humans can successfully perform the landing motion even if the load is changed at various heights. However, it reacted more sensitively to the change in landing height than that load condition. The landing height can be prepared for recognition and shock absorption through visual information, but the weight level is difficult for the body to perceive and explains why it is more difficult to apply it to the landing strategy mechanism for shock absorption.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.333-340
• /
• 2020

This study aims to examine the effects of squat exercise on the vitality and balanced capacity of female university students in their 20s with lower blood flow control. This study selected 40 volunteers from normal adult women in their twenties. Blood flow restriction used Blood Flow Restriction bands (BFR bands). The application method was to put on a blood flow restriction belt in the lower leg of the restricted blood flow area and put 120 mmHg of pressure to limit blood flow while the subject was standing comfortably. It was found that there were statistically significant differences in Height, Maximum concentric power and Take off speed between two groups(p<.05), There was statistically unimportant differences in foot scan between two groups(p>.05). This study found that to find out the changes in balance and alacrity, the experimental and control groups were divided into two groups. In conclusion, there were no significant differences in balance capability, but there were significant differences over time in net power.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1489-1498
• /
• 2022

Objective: The objective of this study was to identify polymorphism in olfactomedin like 3 (OLFML3) gene, and association analysis with meat quality, carcass characteristics, retail meat cut, and fatty acid composition in sheep, and expression quantification of OLFML3 gene in phenotypically divergent sheep. Methods: A total of 328 rams at the age of 10 to 12 months with an average body weight of 26.13 kg were used. A novel polymorphism was identified using high-throughput sequencing in sheep and genotyping of OLFML3 polymorphism was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Among 328 rams, 100 rams representing various sheep genotypes were used for association study and proc general linear model was used to analyse association between genotypes and phenotypic traits. Quantitative real-time polymerase chain reaction (qRT-PCR) was used for the expression analysis of OLFML3 mRNA in phenotypically divergent sheep population. Results: The findings revealed a novel polymorphism in the OLFML3 gene (g.90317673 C>T). The OLFML3 gene revealed three genotypes: CC, CT, and TT. The single nucleotide polymorphism (SNP) was found to be significantly (p<0.05) associated with meat quality traits such as tenderness and cooking loss; carcass characteristics such as carcass length; retail meat cut such as pelvic fat in leg, intramuscular fat in loin and tenderloin, muscle in flank and shank; fatty acids composition such as tridecanoic acid (C13:0), palmitoleic acid (C16:1), heptadecanoic acid (C17:0), ginkgolic acid (C17:1), linolenic acid (C18:3n3), arachidic acid (C20:0), eicosenoic acid (C20:1), arachidonic acid (C20:4n6), heneicosylic acid (C21:0), and nervonic acid (C24:1). The TT genotype was associated with higher level of meat quality, carcass characteristics, retail meat cut, and some fatty acids composition. However, the mRNA expression analysis was not different among genotypes. Conclusion: The OLFML3 gene could be a potential putative candidate for selecting higher quality sheep meat, carcass characteristics, retail meat cuts, and fatty acid composition in sheep.