• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.63-76
• /
• 2011

This paper studies the impact of Korean introduction of the Generalized System of Preferences(GSP) to developing countries, which are continuously arguing to support research and development for reducing greenhouse gas(GHG) emission with developed countries in the Conference of the Parties(COP) of UNFCCC. This paper is focusing on the expecting effects of trade and GHG emission reduction when Korea provides GSP to Indonesia, Brazil, and Ethiopia, which are selected in the first session of Global Green Growth Institute(GGGI). This paper uses the methodology of the intra-industry trade index multiplied by Korean import-induced coefficients. To Indonesia, Korean probable GSP would benefit exports of Indonesian agriculture, forestry, fishery, and livestock farming industries, which would contribute to Indonesian reduction of GHG emission. To Brazil, the exports to Korea would increase in the GHG sensitive industries such as metal, fat, oils, food, and beverage industries. Ethiopia belongs to the least developed countries. So Korean GSP would support the exports and GHG reduction in Ethiopian agriculture, forestry, fisheries, textiles, and leather industries. Without conflicting most favored nation treatment(MFN) principle in WTO, the introduction of GSP would be a good compensation for GHG reduction to developing countries.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• Clean Technology
• /
• v.23 no.4
• /
• pp.378-387
• /
• 2017

To obtain epoxy resin with permanently attached flame-retardant groups, phosphorus compound containing di-hydroxyl group [10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ] and silicone compound containing di-hydroxyl group (polydimethylsiloxane, hydroxyl terminated, PDMS) were reacted with uncured epoxy prepolymer (diglycidyl ether of bisphenol A, DGEBA) and then cured using 4,4-diaminodiphenylmethane (DDM) as a crosslinking agent. The properties of the resulting epoxy materials were characterized using Fourier transform infrared (FTIR) spectrometer, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI) test/vertical burning test (UL 94-V test), tensile properties test and impact test. This study examined the effect of phosphorus/silicone compound contents on the thermal/mechanical properties and flame retardancy of cured epoxy resins containing phosphorus and silicone compounds. It was found that the thermal/mechanical properties of epoxy resins containing phosphorus and silicone components were higher than those of simple epoxy resin. The flame-retardancy (LOI: 29.9 ~ 31.8% and UL 94-V: V-0) of all samples containing phosphorus compound and phosphrous compound/silicone compound was found to be passed the flame-retardant requirements (LOI: > 30%, UL 94-V: V-0) of LOI and vertical burning tests. However, the flame-retardancy (LOI: 21.4% and UL 94-V: no rating) of simple epoxy resin was found to be failed the flame-retardant requirements.

• Clean Technology
• /
• v.13 no.3
• /
• pp.195-200
• /
• 2007

This study investigated the flow rate changes of the heterogeneous rectangular microchannels which have different hydrophilic property on the bottom surface. The heterogeneous rectangular microchannel has three native PDMS (poly-dimethyl siloxane) surfaces which were patterned by the soft lithography. PDMS bottom surface was treated by the argon plasma and coated by the allyl alcohol (99%). The channel length was 10, 20 and 30 mm and the channel width was 100, 200 and $300\;{\mu}m$, respectively. Several external voltages were applied to make the fluid flow by the electroosmosis in the microchannel. For the same electric field strength and hydrophilicity of the bottom surface, the flow rate is almost same. This result is matched to the theoretical expectation and confirms that the experimental system is reliable. With increasing the channel width, the flow rate increased for the same hydrophilicity of the bottom surface. The flow rate of the microchannel of higher hydrophilicity was larger than that of the microchannel of lower hydrophilicity. This result implies that the hydrophilicity change of the bottom surface could be applied to control the flow rate in the microchannel.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.525-532
• /
• 2024

This study explores the impact of physical characteristics (e.g., shape, color, material, size, weight, technical features) of smart wristbands and smartwatches on consumers' perceived functional, aesthetic, and symbolic values using an extended technology acceptance model. An online survey was conducted with adult residents of the United States who had experience using smart wristbands or smartwatches. Participants were asked about various physical characteristics of products they had used in the past year or were currently using, and their evaluations of these characteristics. The results revealed that the shape of the front display shape significantly influenced symbolic value, with circle shape and square shpae showing significantly higher symbolic value than rectangle shape. Wristband materials also had a significant impact on symbolic value, with metal and leather showing higher symbolic value among various materials. Additionally, an increase in product size was associated with higher symbolic value. Moreover, certain technical features such as activity tracker, alarm clock, and distance tracking influenced perceived functional value, while functions like time display, GPS, and email influenced perceived aesthetic value. Pedometer, GPS, and email were found to enhance perceived symbolic value. These findings provide valuable insights into consumer preferences for smart wristbands and smartwatches, serving as valuable information for product improvement and new product development.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.190-200
• /
• 2018

This study estimated the marginal production value based on the production function approach to confirm the economic value of industrial water supply projects. For this, we analyzed 4 data sets classified by 11 industry types according to Cobb-Douglas Function, Translog Function, and Translog function with sector dummy variables. As a result, the average industrial marginal product value of the entire industry was 3,217~5,357 won/ton, 2,994~4,569 won/ton and 3,620~5,342 won/ton, respectively. The results by industry type were the largest in furniture and other manufacturing industries and showed the lowest marginal production value in the textile and leather industries. Overall, the results from the Cobb-Douglas function were highly evaluated. And the volatility according to data sets was also analyzed in the Cobb-Douglas function. There have been few studies on the economic value of industrial water compared to domestic water. It is considered that multidisciplinary consensus will be needed through active research in the future.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.616-622
• /
• 2009

In-depth understanding of the influence of hot pressing and melt processing on the properties of thermoplastic polyurethane (TPU) is critical for effective mechanical recycling of TPU scraps. Therefore, this study focused on the effects of hot pressing and melt mixing on molecular weight (MW), polydispersity index (PDI), melt index (MI), characteristic IR peaks, hardness, thermal degradation and mechanical properties of TPU. The original TPU pellet (o-TPU) showed two broad peaks at lower and higher MW regions. However, four TPU film samples, TPU-0 prepared only by hot pressing of o-TPU pellet and TPU-1, TPU-2 and TPU-3 obtained by hot pressing of melt mixed TPUs (where the numbers indicate the run number of melt mixing), exhibited only a single peak at higher MW region. The TPU-0 film sample had the highest $M_n$ and the lowest PDI and hardness. The TPU-1 film sample had the highest $M_w$ and tensile modulus. As the run number of melt mixing increased, the peak-intensity of hydrogen bonded C=O stretching increased, however, the free C=O peak intensity, tensile strength/elongation at break and average MW decreased. All the samples showed two stage degradations. The degradation temperatures of TPU-0 sample (359 $^{\circ}C$ and 394 $^{\circ}C$)were higher than those of o-TPU (342 $^{\circ}C$ and 391 $^{\circ}C$). While all the melt mixed samples degraded at almost the same temperature (365 $^{\circ}C$ and 381 $^{\circ}C$). The first round of hot pressing and melt mixing was found to be the critical condition which led to the significant changes of $M_n$/$M_w$/PDI, MI, mechanical property and thermal degradation of TPU.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.92-100
• /
• 2005

This study was conducted to find suitable methods for screening organic resources useful for compost. Twenty-seven industrial and domestic sludges were collected from various cities and industrial areas. Contents of organic matters in the sludges were in the range of 79.3-98.0%, and the contents were much higher than the regulation level (60%) for raw materials of compost. Contents of total nitrogen were in the range of 0.8-2.6%. Contents of Fe and Al were very high. Content of HEM was highest in textile sludge ($257mg\;kg^{-1}$) and the contents in the others were in the range of $12.6-90.3mg\;kg^{-1}$. Content of PAHs was lowest in food sludge ($739.1{\mu}g\;kg^{-1}$ and pulp-mill sludge had the highest PAHs content ($3461.8{\mu}g\;kg^{-1}$). $Microtox^{(R)}$ $EC_{50}$ values were higher in the sludges which were classified as a possible material in composting after analysis and investigation. Lettuce root elongation and $EC_{50}$ values were relatively lower in pulp-mill sludge, sewage sludge 3 (Large city), food sludge and leather sludge. Therefore, mineral nutrients, heavy metals, organic compounds (HEM, PAHs, PCBs), and bioassay ($Microtox^{(R)}$ $EC_{50}$, Relative root elongation test) are recommended to be included in the screening system of raw material of compost in addition to the current regulation with organic matter and 8 heavy metals.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2006

This study was conducted to find a system for screening organic resources with 16 species, 62 samples which were selected to randomizing point from city, province and industrial areas in the whole country. Content of organic matters were $65.3%{\sim}98.0%$ in all samples so that they were largely over than 60%, raw material regulation of compost. Concentrations of total nitrogen and total phosphorus were $0.7{\sim}4.8%\;and\;0.8{\sim}5.0$, they could look for effect of the nitrogen and phosphorus supply as a raw material of compost. In case of 8 elements concentrations of heavy metal, they were too high to use as raw materials of compost which were over to regulation limit in Cu, Cr, Ni, and As from fiber industry, Ni from food company and leather industry, and the others are adapt to limit levels. HEM contents fro the highest to $113mg\;kg^{-1}$ from liber industry and PAHs content were the highest to $3,462ug\;kg^{-1}$ from paper-mill manufacture. Distribution of PAHs concentiations were naphthalene>phenanthrene>pyrene>fluoroanthene>acenaphthene. $Microtox{(R)}\;EC_{50}$ values for bioassay were pharmaceutical company>paper-mill manufacture>industrial area sewage sludge>fiber industry>urban sewage sludge>metropolitan sewage sludge. HEM between Zn, Cu, and Ni was significant at the 99% and between Cd was significant at the 95%, Microtox between Hg and BEM significant at the 95%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.252-258
• /
• 1998

A feeding experiment was conducted to investigate the effects of deletion of P, Ca, Zn, Mg, Fe, K, Mn, or Se from mineral premix in the diets containing $40\%$ fish meal on growth performance of juvenile Korean rockfish. Three replicate groups of the fish initially averaging 5.4 g were fed the experimental diets deleted one ot each mineral (P, Ca, Zn, Mg, Fe, K, Mn, Se or all) in the mineral premix for 9 weeks. A basal diet with fish meal ($40\%$), meat meal ($9\%$), soybean meal ($5\%$), corngluten meal ($3\%$), and leather meal ($3\%$) as protein sources were included. Weight gain in fish fed diets deleted Ca, Zn, K, or Se was lower than that of control diet ( P<0.05). Daily feed intake, condition factor, hepatosomatic index and liver chemical composition were not affected by dietary mineral premixes (P>0.05). Apparent skeletal deformities were not observed in the diets deleted each mineral, The data obtained in this study indicate that each of the Ca, Zn, K, or Se should be added in the diet contained $40\%$ fish meal for normal growth of Korean rockfish.