• Journal of Digital Convergence
• /
• 제18권5호
• /
• pp.25-31
• /
• 2020

This study analyzes the effects of aging workforce on human capital and the per capita gross regional domestic product, using regional panel statistics from 1995 to 2017. According to the results of the two-stage least-squares panel regression analysis reflecting the fixed effects by region, the aging of the labor force had no effect on the human capital employment ratio and per capita gross domestic product in the metropolitan cities, but reduced human capital and per capita gross domestic product in the provinces. The share of service businesses had a positive effect on human capital in metropolitan cities, but the effect was not significant in the provinces. Human capital significantly contributed to the increase in per capita gross regional domestic product in the metropolitan cities, but the physical capital stock significantly contributed to the increase in per capita gross regional domestic product in the provinces. The results of this study suggest that the human capital job policy and the per capita regional GDP growth policy due to the aging workforce may be different between metropolitan cities and provinces.

• Geophysics and Geophysical Exploration
• /
• 제4권4호
• /
• pp.124-132
• /
• 2001

Electrical resistivity survey has been conducted for delineating geological fault structure in Kaekok-ri near Kyungju. In general, electrical resistivity survey has an advantage of searching buried faults and its traces compared with other geophysical survey methods. Distribution of electrical conductivity in the ground is influenced by the ratio of pores, groundwater and clay minerals. These properties are evidenced indirectly to explain for weathering condition, faults and fracture Bones. Thus the electrical resistivity survey can be an effective method to find buried faults. We have carried out two dimensional (2-D) interpretation by means of smoothness-constrained least-squares and finite element method. Field data used in this paper was acquired at Kaekok-ri, Wuedong-eup, Kyungju-si, where is Ulsan Fault and is close to the region in which debatable quaternary fault traces were found recently. The dipole-dipole array resistivity survey which could show the 2-D subsurface electrical resistivity structure, was carried out in the area with three lines. The results showed good property of fault, fracture zone and fault traces which we estimated were congruous with the results. Through this study, 2-D electrical resistivity survey interpretation for fault is useful to apply.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.117-122
• /
• 2006

In the geophysical monitoring to understand the change of subsurface material properties with time, the time-invariant static subsurface model is commonly adopted to reconstruct a time-lapse image. This assumption of static model, however, can be invalid particularly when fluid migrates very quickly in highly permeable medium in the brine injection experiment. In such case, the resultant subsurface images may be severely distorted. In order to alleviate this problem, we develop a new least-squares inversion algorithm under the assumption that the subsurface model will change continuously in time. Instead of sampling a time-space model into numerous space models with a regular time interval, a few reference models in space domain at different times pre-selected are used to describe the subsurface structure continuously changing in time; the material property at a certain space coordinate are assumed to change linearly in time. Consequently, finding a space-time model can be simplified into obtaining several reference space models. In order to stabilize iterative inversion and to calculate meaningful subsurface images varying with time, the regularization along time axis is introduced assuming that the subsurface model will not change significantly during the data acquisition. The performance of the proposed algorithm is demonstrated by the numerical experiments using the synthetic data of crosshole dc resistivity tomography.

• Journal of Embryo Transfer
• /
• 제19권3호
• /
• pp.291-299
• /
• 2004

Characterization of quantitative trait loci (QTL) was investigated in the experimental cross population between Berkshire and Yorkshire breed. A total of 512 F$_2$ offspring from 65 matting of F$_1$ parents were phenotyped the carcass traits included average daily gain (ADG), average backfat thickness (ABF), tenth rip backfat thickness (TRF), loin eye area (LEA), and last rip backfat thickness (LRF). All animals were genotyped for 125 markers across the genome. Marker linkage maps were derived and used in QTL analysis based on line cross least squares regression interval mapping. A decision tree to identify QTL with imprinting effects was developed based on tests against the Mendelian mode of QTL expression. To set the evidence of QTL presence, empirical significance thresholds were derived at chromosome-wise and genome-wise levels using specialized permutation strategies. Significance thresholds derived by the permutation test were validated in the data set based on simulation of a pedigree and data structure similar to the Berkshire-Yorkshire population. Genome scan revealed significant evidences for 13 imprinted QTLs affecting growth and body compositions of which nine were identified to be QTL with paternally expressed inheritance mode. Four of QTLs in the loin eye area (LEA), and tenth rip backfat thickness (TRF), a maternally expressed QTL were found on chromosome 10 and 12. These results support the useful statistical models to analyse the imprinting far the QTLs related carcass trait.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.613-619
• /
• 2005

Indigenous Yakutian cattle' adaptation to the hardest subarctic conditions makes them a valuable genetic resource for cattle breeding in the Siberian area. Since early last century, crossbreeding between native Yakutian cattle and imported Simmental and Kholmogory breeds has been widely adopted. In this study, variations at 22 polymorphic microsatellite loci in 5 populations of Yakutian, Kholmogory, Simmental, Yakutian-Kholmogory and Yakutian-Simmental cattle were analysed to estimate the genetic contribution of Yakutian cattle to the two hybrid populations. Three statistical approaches were used: the weighted least-squares (WLS) method which considers all allele frequencies; a recently developed implementation of a Markov chain Monte Carlo (MCMC) method called likelihood-based estimation of admixture (LEA); and a model-based Bayesian admixture analysis method (STRUCTURE). At population-level admixture analyses, the estimate based on the LEA was consistent with that obtained by the WLS method. Both methods showed that the genetic contribution of the indigenous Yakutian cattle in Yakutian-Kholmogory was small (9.6% by the LEA and 14.2% by the WLS method). In the Yakutian-Simmental population, the genetic contribution of the indigenous Yakutian cattle was considerably higher (62.8% by the LEA and 56.9% by the WLS method). Individual-level admixture analyses using STRUCTURE proved to be more informative than the multidimensional scaling analysis (MDSA) based on individual-based genetic distances. Of the 9 Yakutian-Simmental animals studied, 8 showed admixed origin, whereas of the 14 studied Yakutian-Kholmogory animals only 2 showed Yakutian ancestry (>5%). The mean posterior distributions of individual admixture coefficient (q) varied greatly among the samples in both hybrid populations. This study revealed a minor existing contribution of the Yakutian cattle in the Yakutian-Kholmogory hybrid population, but in the Yakutian-Simmental hybrid population, a major genetic contribution of the Yakutian cattle was seen. The results reflect the different crossbreeding patterns used in the development of the two hybrid populations. Additionally, molecular evidence for differences among individual admixture proportions was seen in both hybrid populations, resulting from the stochastic process in crossing over generations.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권12호
• /
• pp.5125-5135
• /
• 2015

Background: Total fat intake may be associated with increased risk of breast cancer, and fish oil has been suggested as a protection factor to breast cancer. But the effect of vegetable oils is inconclusive. We aimed to investigate the association with high vegetable oils consumption and breast cancer risk, and evaluated their dose-response relationship. Design: We systematically searched the MEDLINE, EMBASE, Cochrane databases, and CNKI updated to December 2014, and identified all observational studies providing quantitative estimates between breast cancer risk and different vegetable oils consumption. Fixed or random effect models were used to estimate summary odds ratios for the highest vs. lowest intake, and dose-response relationship was assessed by restricted cubic spline model and generalized least-squares trend (GLST) model. Results: Five prospective cohort studies and 11 retrospective case-control studies, involving 11,161 breast cancer events from more than 150,000 females, met the inclusion criteria. Compared with the lowest vegetable oils consumption, higher intake didn't increased the risk of breast cancer with pooled OR of 0.88 (95% CIs:0.77-1.01), and the result from dose-response analyses didn't show a significant positive or negative trend on the breast cancer risk for each 10g vegetable oil/day increment (OR=0.98, 95% CIs: 0.95-1.01). In the subgroup analyses, the oils might impact on females with different strata of BMI. Higher olive oil intake showed a protective effect against breast cancer with OR of 0.74 (95% CIs: 0.60-0.92), which was not significant among the three cohort studies. Conclusions: This meta-analyses suggested that higher intake of vegetable oils is not associated with the higher risk of breast cancer. Olive oil might be a protective factor for the cancer occurrence among case-control studies and from the whole. Recall bias and imbalance in study location and vegetable oils subtypes shouldn't be ignored. More prospective cohort studies are required to confirm the interaction of the impact of vegetable oils on different population and various cancer characteristic, and further investigate the relationship between different subtype oils and breast cancer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제38권12호
• /
• pp.1387-1394
• /
• 2014

In a photoelastic experiment, it is necessary to know the material stress fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant can be obtained using a simple tension specimen and/or a circular disk under diametric compression. In these methods, there is generally a need to apply numerous loads to the specimen in response to the relationship of the fringe order. Then, the least squares method is used to obtain the material constant. In this paper, the fringe orders that appear on a four-point bending specimen are used to determine the fringe constant. This method requires four photoelastic fringes obtained from a circular polariscope by rotating the analyzer to 0, ${\pi}/4$, ${\pi}/2$, and $3{\pi}/4$ radians. Using the four-point bending specimen to determine the material stress fringe constant has an advantage because measurements can be made at different locations by applying a constant load. The stress fringe constant measured with this method is within the range suggested by the manufacturer of the photoelastic material.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.1-6
• /
• 2004

The 490 and 380 performance records of Karan Fries and Karan Swiss cows developed through crossbreeding followed by inter-se mating were evaluated for production, reproduction performance and disposal rate. Duration of study (1982-92) was grouped into five periods (1982-83; 1984-85; 1986-87; 1988-89; 1990-92) and each year was divided into four seasons (Winter: Dec.-Jan.; Spring: Feb.-March; Summer: April-June; Rainy: July-Sept.; Autumn: Oct.-Nov). Data were also classified according to sire and level of inbreeding. The least squares means of FLY (first lactation yield -305 days), FLL (first lactation length), FSP (first service period), FDP (first dry period), FCI (first calving interval ), MY/FLL (milk yield per day of first lactation length), MY/FCI (milk yield per day of first calving interval), EBV (expected breeding value) and EBE (expected breeding efficiency) were $3,173{\pm}82$ kg, $34611{\pm}$days, $143{\pm}11$ days, $75{\pm}6$ days, $423{\pm}11$ days, $10.6{\pm}0.2$ kg, $8.9{\pm}0.2$ kg, $3,380{\pm}26$ kg, and $88.2{\pm}1.3$% respectively in Karan Fries. Corresponding estimates in Karan Swiss cows were $2,616{\pm}82$ kg, $328{\pm}8$ days, $148{\pm}12$ days, $103{\pm}9$ days, $435{\pm}13$ days, $8.9{\pm}0.2$ kg, $7.2{\pm}0.3$ kg, $2,924{\pm38}$ kg and $86.0{\pm}3.8$% respectively. The effect of sire was significant on FLY, MY/FLL, MY/FCI and EBV in both the herd (p<0.01). The 10 and 15% sires showed superiority (FLY) over herd average of 11 and 7% in Karan Fries and 32 and 21% in Karan Swiss cattle respectively. Inbreeding has adversely and significantly (p<0.05) affected the FLY, MY/FLL, MY/FCI and survivability of Karan Fries females; FDP and disposal through culling of Karan Swiss heifers. The Karan Fries heifers with inbreeding above 12.5% performed 16% lower FLY to herd average. The effect of season of calving was significant on FLL, FSP and FCI (p<0.05) in Karan Fries. Summer calvers ($361{\pm}12$) were have higher lactation length and autumn calvers ($329{\pm}14$) had minimum. Period of calving significantly influenced the FSP, FCI, MY/FLL and MY/FCI in Karan Fries and FLY, MY/FLL and MY/FCI in Karan Swiss. Production efficiency traits in Karan Fries herd witnessed higher yield in the last two periods whereas, Karan Swiss heifers showed fluctuating performance. The findings suggested judicious use of available genetic variability, keeping of inbreeding under safer level and managemental interventions for the consistent improvement of both herds.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1080-1084
• /
• 2002

Carcass characteristics of 241 crossbred pigs (Korean wild boars ${\times}$ Landrace sows) were analyzed to examine variations in fasted body weight (FASTWT), carcass weight (CARCWT), dressing percentage (DP), back fat thickness (BFT) and longissimus muscle weight (LMW), and to estimate genetic and phenotypic parameters using three different slaughter-end points. Covariates in the least squares full sib model were slaughter age, fasted body weight and back fat thickness of the carcass. Coefficient of variation was highest for BFT followed by LMW, CARCWT, FASTWT and DP in magnitude. Regressions of three covariates on traits were all linear. However, slaughter age was not significant as a linear covariate for five traits while FASTWT was significant for CARCWT and LMW and BFT was significant for all remaining traits. Genetic and phenotypic variation was considerably reduced by regressing FASTWT or BFT in the model. Heritability estimates of FASTWT, CARCWT, DP and BFT were 0.68, 0.61, 0.11 and 0.49, respectively, using slaughter age as covariate (model 1). Those of CARCWT, DP, BFT and LMW were 0.15, 0.15, 0.30 and 0.11, respectively, using FASTWT as covariate (model 2). Heritability estimates of the traits using LMW as covariate (model 3) were similar to the estimates from Model 1 except that the estimate of CARCWT was reduced to 0.39. Genetic or phenotypic correlations among FASTWT, CARCWT and BFT were all positive and moderate to high. Those between BFT and LMW were also positive and low to moderate. However, genetic and phenotypic correlations between DP and CARCWT were positive while those between DP and FASTWT were negative. It was suggested from this study that differences in carcass yield traits be determined using slaughter age or back fat thickness as slaughter-end point and carcass quality traits using fasted body weight as slaughter-end point.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.777-782
• /
• 2002

Reciprocal effects among local breeds and additive and heterosis effects were estimated for total milk production per lactation (TLP), lactation length (LL) and daily milk yield (DMY). Procedures for an optimum crossbreeding system were examined by comparing various crossbred combinations. Three data sets were chosen from the total records collected from 1962 to 1997. Data set I with a total of 5,938 records composed of 9 breed groups for reciprocal crosses, data set II with a total of 6,064 records composed of 5 breed groups for additive and heterosis effects and data set III with a total of 10,319 records composed of 42 breed groups for optimum crossbreeding system were analyzed. The least squares ANOVA was used. The reciprocal crosses between Red Sindhi and the Bangladeshi Local showed significant difference. When the Red Sindhi was used as cow, the cross was superior to the opposite in terms of the three performance traits. The results showed that additive breed effects on both TLP and DMY were positive and highly significant between Bos indicus and Bos taurus, whereas the individual heterosis effects were not significant. In general, any local breeds were improved two to three times by crossing with the Friesian once or twice. However, the effect was reduced when the grading up with the Friesian was repeated more than twice. On the other hand, when the local breed was crossed with the other breeds such as Holstein and Jersey, the improvement of TLP was less. Crossing the F1 cows with the Friesian bull gave further improvement. Almost the same trends were found also for LL and DMY. The local breeds and their crosses are raised mainly for draft animals, then it is recommended that the crossbreds between the local cows and Friesian are used for dairy purposes and more than 75% Friesian blood is used for beef.